化学计量学在电分析化学中的应用

本文对化学计量学各种方法，诸如多元校正，因子分析，信号处理，参数估计，模式识别等电分析化学中的应用作了回顾及评述，指出了化学计量学电分析化学中应用的良好前景。     

新型有机锗倍半氧化物及硫化物的合成

已先后合成的倍半氧化物类及倍半硫化物类化合物的前体,即有机锗三氯化物中只含1个锗原子。为了考查从含2个锗原子的前体合成的有机锗倍半氧化物及硫化物的药物活性,我们合成了1类化合物及相应的倍半氧化物(2类)及倍半硫化物(3类),并合成了酰基苯胺化合物1_e、2_e及3_e。结果见表1。     

Synthesis of Calix[4]arene Derivatives with NLO Properties

The new chromophore compounds with NLO properties were prepared by Knoevenagel condensation from forrnyl or diformyl calix[4/arene and isophorone derivatives in the presence of piperidine and acetic acid, respectively. In these chromophore calix[4]arenes, the ring locked trienes were employed as the conjugation bridge and electron acceptor in D-π-A units. The NMR spectra demonstrated that they existed in a cone conformation and consequently non-conjugated D-π-A units could be oriented at nearly the same direction.     

A facile synthesis of 2-substituted-2,3-dihydro-4(1H)-quinazolinones in 2,2,2-trifluoroethanol

2-Substituted-2,3-dihydro-4(1H)-quinazolinones were obtained in high yields by condensation of anthranilamide with aryl, alkyl or heteroaryl aldehydes or ketones in the refluxing 2,2,2-trifluoroethanol without any catalyst.     

硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

Living free-radical copolymerization of allyl glycidyl ether with methyl acrylate

An investigation of the copolymerization of allyl glycidyl ether (AGE) with methyl acrylate (MA) was performed in the presence of benzyl imidazole-1-carbodithioate (BICDT) on the thermal initiation condition. Results showed that the process has good characteristics of living free radical polymerization, i.e. the molecular weight of the obtained polymer increases linearly with monomer conversion, molecular weight distribution is very narrow, and a linear relationship between ln([M]₀/[M]) and polymerization time is found. The copolymer structure containing epoxy groups was demonstrated from the ¹H nuclear magnetic resonance (1H NMR) spectrum. It was found that the content of AGE in the copolymer increases with the increase in monomer conversion and molar faction of the AGE in the monomer feed. However, the polymerization could slow down when the fraction of AGE increases in the monomer feed. Taking advantage of living polymerization character, functional block copolymers PSt-b-P (MA-co-AGE) were prepared in the presence of PSt RAFT agent. __________ Translated from Journal of Anhui University of Science and Technology, 2006, 26(3): 56–61 [译自: 安徽理工大学学报]     

The Synthesis of Third—order Optical Nonlinear Organic Polyheterocyclic Materials

Synthesis of the third-order nonlinear materials:bis (1,4-dihydroxynaphthalene) tetrathiafulvalene and bis (1,4-dialkoxylnaphthalene) tetrathiafulvalene has been achieved in four steps, starting from 2,3-dichloro-1,4-naphthaquinone. The materials exhibit larger third-order nonlinear optical susceptibilities χ.     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

Pressure pinched injection of nanolitre volumes in planar micro-analytical devices

A new method for injecting and driving fluids by means of a multi-port injection valve and syringe pumps in a micro-channel network is described. A structure composed of two micro-channels arranged as a cross is connected with capillary tubes to an external multi-port injection valve. The fluid flows are driven by pressure and the multi-port valve controls the direction of the flow within the different sections of the structure. The first position of the multi-port valve allows the preparation of the loading of the sample, which is pinched in the cross section of the two micro-channels. The second position allows the precise injection of nL volumes. No dead volume exists between injection and separation modes. The system can be used to prepare a sample plug by pressure in order to perform chromatography with a broad range of buffered or non-buffered solutions. Thanks to the insensitivity to the ionic strength of the sample, this injection method is useful for the injection of complex biological samples in microchip analysis. In order to demonstrate the feasibility of the method, different solutions of ionic or fluorescent molecules were injected and detected in a photoablated planar polymer device.