TG of polytetrahydrofuran/ isophoronediisocyanate reaction products

TG, swelling, and viscometric studies are presented for the residues, PTHF/IPDI polymer networks, and the extracts, the linear polymers and unreacted IPDI, after Soxhlet extraction of PTHF/IPDI reaction products. The products are obtained by reacting PTHF with 650, 1400, (2×650+1×2900), or 2900 of molecular mass with IPDI at various concentrations in bulk. The results on the swelling and the viscosity experiments suggest that the PTHF/IPDI reaction products have a usual expectable structure. All the TG curves are a double stage curve. The initial stage and the last stage seem to reflect decomposition of PTHF chains and vaporization of the remainder, IPDI, respectively. These are analyzed by a trial-and-error construction, supposing double event behavior. The values of ratio of mass loss associated with the initial event, W0₁, to the mass loss associated with the last event, W0₂, are smaller than the expectable those. This suggests that Event 2 involves vaporization of the decomposition products of PTHF moieties bonded to IPDI in addition to vaporization of IPDI. This revised version was published online in July 2006 with corrections to the Cover Date.     

Behavior of zirconium in the ZrOW(100) system at high temperature, studied by ISS, AES and work-function measurements

The behavior of zirconium atoms at the W(100) surface associated with oxygen adsorption at different sample temperatures has been studied by Auger electron spectroscopy (AES), ion scattering spectroscopy (ISS), and the relative change of the work function (Δф) measured by the onset of the secondary electron energy distribution. The results have revealed: (i) adsorption of zirconium onto the W(100) surface followed by the elevation of the sample temperature up to 1710 K in an oxygen partial pressure of 2.7 × 10⁻⁴ induces complete diffusion of zirconium atoms into the W(100) substrate; (ii) further exposure of oxygen induces co-existence of oxygen and tungsten on the surface at 1710 K, resulting in a work function of 4.37 eV; (iii) keeping the sample temperature at 1710 K, simple evacuation of the system has resulted in surface segregation of zirconium atoms to the surface to form a zirconium atomic layer on the top-most surface, reducing the work function to 2.7 eV. The results have revealed that this specific behavior of zirconium atoms at high temperature assures, with very good reproducibility, the highly stable performance and long service life of Zr---O/W(100)-emitters in practical use, even in a low vacuum of 10⁻⁶ Pa.     

TM–TE hybridization and tunable refraction in magnetophotonic crystals

In the present work we study the photonic band structure (PBS) and the polarization state of the Bloch eigenmodes of a two-dimensional magnetophotonic crystal (MPC) with square lattice formed from magneto-optically (MO) active cylinders. The refraction of light at the boundary of the MPC is analyzed. We found that both—the PBS and eigenmodes of the MPC—are most significantly altered by the MO activity in the vicinity of the degeneracies. For this case we demonstrated the possibility of an abrupt change in the propagation direction of light by the application of a magnetic field. For the Bloch wave vectors and frequencies corresponding to non-degenerate branches, the alteration of the PBS is shown to be negligible and eigenmodes almost completely coincide with linearly TE- and/or TM-polarized eigenmodes of the non-magnetic photonic crystal.     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

Simple and rapid spectrophotometric determination of iron after preconcentration as its 1,10-phenanthroline complex on the natural polymer "chitin"

Preconcentration by collection of metal complexes on chitin has been applied to the spectrophotometric determination of iron in water. The iron is collected as its 1,10-phenanthroline (phen) complex on a column of chitin in the presence of tetraphenylborate as counter-ion. The iron(II)-phen complex retained on the chitin is eluted with an acetone-1M acetic acid mixture (8:2 v/v), and the absorbance of the eluate is measured at 512 nm. Beer's law is obeyed over the concentration range 1.1-11.2 mug of iron in 10 ml of eluate. In the presence of EDTA as masking agent, Ca, Mg, Al, Mn, Zn, Cd and Pb do not interfere in concentrations up to 100 times that of iron(II) and Co, Ni and Cu do not interfere in concentrations up to 20 times that of iron(II). Common inorganic anions do not interfere in concentrations up to 10,000 times that of iron(II). The proposed method has been applied to determination of iron in tap water.     

Regulation of lithospermic acid B and shikonin production in Lithospermum erythrorhizon cell suspension cultures

Cell suspension cultures of Lithospermum erythrorhizon produced a large amount of lithospermic acid B, a caffeic acid tetramer, as well as shikonin derivatives (each ca. 10% of dry wt.) when cultured in shikonin production medium M-9. Various culture factors for increasing the production of lithospermic acid B were investigated. Lithospermic acid B production was inhibited by 2, 4-D or NH4+, whereas it was stimulated by Cu2+. These regulatory patterns were similar to those for the production of shikonin derivatives in these cell cultures, suggestive of close relations and similar metabolic regulation between the production of these compounds. Cultivation under light illumination, however, showed that these metabolisms were independently regulated. In particular, blue light showed a stimulatory effect on lithospermic acid B production, while shikonin production was strongly inhibited, indicative of an effective condition for lithospermic acid B production.     

The biosynthesis of broussonetines: origin of the carbon skeleton

Broussonetines are glycosidase-inhibitory alkaloids obtained from Broussonetia kazinoki. Feeding experiments using [1-13C]glucose and 13C-NMR spectroscopic studies showed that broussonetines are biosynthesized through routes similar to those of sphingosine and phytosphingosine.