Ab initio potential energy surfaces, total absorption cross sections, and product quantum state distributions for the low-lying electronic states of N(2)O

Adiabatic potential energy surfaces for the six lowest singlet electronic states of N(2)O (X (1)A('), 2 (1)A('), 3 (1)A('), 1 (1)A("), 2 (1)A(") and 3 (1)A(")) have been computed using an ab initio multireference configuration interaction (MRCI) method and a large orbital basis set (aug-cc-pVQZ). The potential energy surfaces display several symmetry related and some nonsymmetry related conical intersections. Total photodissociation cross sections and product rotational state distributions have been calculated for the first ultraviolet absorption band of the system using the adiabatic ab initio potential energy and transition dipole moment surfaces corresponding to the lowest three excited electronic states. In the Franck-Condon region the potential energy curves corresponding to these three states lie very close in energy and they all contribute to the absorption cross section in the first ultraviolet band. The total angular momentum is treated correctly in both the initial and final states. The total photodissociation spectra and product rotational distributions are determined for N(2)O initially in its ground vibrational state (0,0,0) and in the vibrationally excited (0,1,0) (bending) state. The resulting total absorption spectra are in good quantitative agreement with the experimental results over the region of the first ultraviolet absorption band, from 150 to 220 nm. All of the lowest three electronically excited states [(1)Sigma(-)(1 (1)A(")), (1)Delta(2 (1)A(')), and (1)Delta(2 (1)A("))] have zero transition dipole moments from the ground state [(1)Sigma(+)(1 (1)A('))] in its equilibrium linear configuration. The absorption becomes possible only through the bending motion of the molecule. The (1)Delta(2 (1)A('))<--X (1)Sigma(+)((1)A(')) absorption dominates the absorption cross section with absorption to the other two electronic states contributing to the shape and diffuse structure of the band. It is suggested that absorption to the bound (1)Delta(2 (1)A(")) state makes an important contribution to the experimentally observed diffuse structure in the first ultraviolet absorption band. The predicted product rotational quantum state distribution at 203 nm agrees well with experimental observations.     

A new coumarin from stem bark of Mesua hexapetala

A new alkylated coumarin derivative, hexapetarin (1) along with three other xanthones, trapezifolixanthone (2), cudraxanthone G (3) and 1,3,7-trihydroxy-2,4-di (3-methyl-2-butenyl)xanthone (4), and four common triterpenoids, friedelin (5), stigmasterol (6), beta-sitosterol (7) and gamma-sitosterol (8) were isolated from the stem bark of Mesua hexapetala (Clusiaceae), a plant, native to Malaysia. The structures of these compounds were elucidated and determined using spectroscopic techniques such as NMR and MS. Anti-inflammatory activity assay indicated hexapetarin (1) to possess moderate anti-inflammatory activity, while 1,3,7-trihydroxy-2,4-di (3-methyl-2-butenyl)xanthone (4) gave very good activity.     

Development of an optical fibre reflectance sensor for p-aminophenol detection based on immobilised bis-8-hydroxyquinoline

2,2′-(1,4-Phenylenedivinylene)bis-8-hydroxyquinoline (PBHQ), a highly sensitive reagent used for the colorimetric determination of p-aminophenol (PAP), was successfully immobilised on XAD-7 and coupled with optical fibres to investigate a sensor-based approach for determining p-aminophenol. The solid-state sensor is based on the reaction of PAP with PBHQ in presence of an oxidant to produce an indophenol dye. The reflectance measurements were carried out at a wavelength of 647 nm since it yielded the largest divergence different in reflectance spectra before and after reaction with the analyte. The linear dynamic range of PAP was found within the concentration range of 0.1-2.18 mg l⁻¹ with its LOD of 0.02 mg l⁻¹. The sensor response from different probes (n = 7) gave a R.S.D. of 4.4% at 1.09 mg l⁻¹ PAP concentration. The response time of the optical one-shot sensor was 5 min for a stable solution. As this PAP sensor is irreversible, a fresh sensor has to be used for each measurement. All the experimental parameters were optimized for the determination of PAP. Using the optical sensing probe, PAP in pharmaceutical wastewater and paracetamol was determined. The effect of potential interferences such as inorganic and organic compounds was also evaluated. Potential on-site determination of PAP with such sensors can indirectly aid detection of organo-phosphorus nerve agents and pesticides in the field by inhibition of acetylcholine esterase-catalyzed hydrolysis of p-aminophenyl acetate to p-aminophenol.     

Optical absorption spectrum of Cu2O-CaO-P2O5 glasses

Homogeneous CaO-P₂O₅ and Cu₂O-CaO-P₂O₅ glasses were prepared using a melt-quenched method under controlled conditions. The binary glasses were found to be colourless and transparent while the ternary glasses changed from light green to dark green as the Cu₂O content increased. From the absorption edge studies, the values of the optical band gap, E_opt and Urbach energy, ΔE were evaluated. The position of the absorption edge and hence the optical band gap were found to depend on the glass composition. Analysis of the optical band gap shows that for the binary glasses, the value increases as the content of CaO decreases, while for the ternary glasses, the value of the optical band gap increases as the content of the Cu₂O decreases. The density of the glasses was also measured and was found to increase with the increase in CaO and Cu₂O contents.     

XRD and TPR Studies of Cu-Al Hydrotalcite Derived Highly Dispersed Mixed Metal Oxides

A series of Cu/Al catalysts, containing different proportions of copper and aluminium, have been prepared by coprecipitation using metal nitrate precursors and Na₂CO₃. The dried precipitate catalyst precursors were characterized by X-ray diffraction (XRD) to show the presence of Cu-Al binary hydrotalcite-like phase. The dried precipitates were calcined at 873 K for 3 h. The calcined catalysts were characterized by XRD and temperature-programmed reduction (TPR) methods to show the presence of unidentified mixed oxides. The results showed that the extent of metal-support interaction increased with copper loading due to the mixed oxides formed from the hydrotalcite-type phase during calcination. High dispersion of the mixed metal oxides was indicated by comparison with similar studies on Cu-Al catalysts, prepared by similar methods, whose precursors showed no hydrotalcite formation.     

The Role of Genetic Polymorphism and Other Factors on Clopidogrel Resistance (CR) in an Asian Population with Coronary Heart Disease (CHD)

Clopidogrel is a widely-used antiplatelet drug. It is important for the treatment and prevention of coronary heart disease. Clopidogrel can effectively reduce platelet activity and therefore reduce stent thrombosis. However, some patients still have ischemic events despite taking the clopidogrel due to the alteration in clopidogrel metabolism attributable to various genetic and non-genetic factors. This review aims to summarise the mechanisms and causes of clopidogrel resistance (CR) and potential strategies to overcome it. This review summarised the possible effects of genetic polymorphism on CR among the Asian population, especially CYP2C19 *2 / *3 / *17, where the prevalence rate among Asians was 23.00%, 4.61%, 15.18%, respectively. The review also studied the effects of other factors and appropriate strategies used to overcome CR. Generally, CR among the Asian population was estimated at 17.2–81.6%. Therefore, our overview provides valuable insight into the causes of RC. In conclusion, understanding the prevalence of drug metabolism-related genetic polymorphism, especially CYP2C19 alleles, will enhance clinical understanding of racial differences in drug reactions, contributing to the development of personalised medicine in Asia.     

Systematic microstructural development with thermal diffusivity behaviour from nanometric to micronic grains of strontium titanate

Journal of Thermal Analysis and Calorimetry - Strontium titanate is a promising candidate for applications in thermoelectric, thermal management applications, and modern electronic devices because...     

Development of Poly(Vinyl Alcohol)-Based Polymers as Proton Exchange Membranes and Challenges in Fuel Cell Application: A Review

Abstract

Poly(vinyl alcohol) (PVA) is a biodegradable, water-soluble membrane that has low methanol permeation and reactive chemical functionalities. Modification of these features makes PVA an attractive proton exchange membrane (PEM) alternative to Nafion^TM. However, the pristine PVA membrane is a poorer proton conductor than the Nafion^TM membrane due to the absence of negatively charged ions. Hence, modification of PVA matrixes whilst complying with the requirements of projected applications has been examined extensively. Generally, three modification methods of PVA membranes have been highlighted in previous reports, and these are (1) grafting copolymerization, (2) physical and chemical crosslinking, and (3) blending of polymers. The use of each modification method in different applications is reviewed in this study. Although the three modification methods can improve PVA membranes, the mixed method of modification provides another attractive approach. This review covers recent studies on PVA-based PEM in different fuel cell applications, including (1) proton-exchange membrane fuel cells and (2) direct-methanol fuel cells. The challenges involved in the use of PVA-based PEM are also presented, and several approaches are proposed for further study.