Palladium(II) complexes bearing N‐alkylpiperidoimidazolin‐2‐ylidene derivatives: Effect of alkyl chain length of ligands on catalytic activity

A series of piperidoimidazolinium salts which differ in the chain lengths (butyl, octyl, dodecyl, octadecyl) and their Pd–N‐heterocyclic carbene complexes with pyridine were synthesized and characterized using elemental analysis and spectroscopic methods. The effects of these ligands on catalyst activation and the performance of the complexes were studied in Suzuki–Miyaura reactions of arylboronic acid with aryl chlorides. The complex with the ligand having the longest chain length was found to be most active. The results demonstrated that the length of the alkyl chain of the piperidoimidazolin‐2‐ylidene controlled the dispersion and composition of the nanoparticles and it affected the catalytic activity. The impact of alkyl chain length of piperidoimidazolin‐2‐ylidene on the Suzuki–Miyaura reactions of arylboronic acid with aryl halides was systematically investigated.     

Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Nafion-graphene composite film modified glassy carbon electrode for voltammetric determination of p-aminophenol

A Nafion-graphene (Nafion-GR) nanocomposite film modified glassy carbon electrode was fabricated by a simple drop-casting method, and used in the electrochemical detection of p-aminophenol (4-AP). Owing to the large surface area, good conductivity of GR and good affinity of Nafion, the sensor exhibited excellent electrocatalytic activity for the oxidation of 4-AP. The electrochemical behaviors of 4-AP on Nafion/GR film modified glassy carbon electrodes were investigated by cyclic voltammetry and differential pulse voltammetry. A calibration curve is constructed in the same matrix, urine, as the unknown samples to be analyzed. The Nafion-GR film modified electrode was linearly dependent on the 4-AP concentration and the linear analytical curve was obtained in the ranges of 0.5–200 μM with differential pulse voltammetry (DPV) and the detection limit was 0.051 μM. The Nafion-graphene nanocomposite modified electrode exhibited good reusability than pure graphene modified GCE. This procedure can be used for the determination of p-aminophenol in the presence of its degradation products and paracetamol. Finally, the proposed method was successfully used to determine p-aminophenol in local tap water samples in urine samples and pharmaceutical preparations.     

X-ray diffraction studies on crystallite size evolution of CoFe2O4 nanoparticles prepared using mechanical alloying and sintering

Nanosized cobalt ferrite spinel particles have been prepared by using mechanically alloyed nanoparticles. The effects of various preparation parameters on the crystallite size of cobalt ferrite which includes milling time; ball-to powder weight ratio (BPR) and sintering temperature, were studied using X-ray diffractometer (XRD). Scherrer's equation was used to study the crystallite size evolution of the as-prepared materials. The results of the as-milled sample revealed that both milling time and BPR plays a role in determining the crystallite size of the milled powder. However, where sintering is involved, the sintering temperature results in grain growth, and thus plays a dominant role in determining the final crystallite size of the samples sintered at higher temperature (above 900 °C). From the vibrating-sample magnetometer (VSM) measurement it was observed that the coercivity of the as-milled samples without sintering is almost negligible, which is a type characteristic of superparamagnetic material. However, for the sintered samples, the saturation increases while coercivity decreases with increases sintering temperature.     

Dynamical pattern formation for diblock copolymer films under stretch by moving walls

We propose a computational method that takes into account the dynamical influence of moving rigid walls over the pattern formation for thin films of diblock copolymers. The competition between the surface field energy and elastic stretching energy, and the effects of the molecular relaxation on pattern formation are studied. Finally, it is also observed that stretching the film enhances the ordering of patterns in it.     

Gain and noise figure improvements in a shorter wavelength region of EDFA using a macrobending approach

Gain and noise figure improvements are demonstrated in a shorter wavelength region of a double-pass EDFA using a macrobending approach. The EDF is wound in a small radius to suppress the amplified spontaneous emission at the longer wavelength in order to achieve a high amplification in the shorter wavelength. Gain enhancements of about 12–14 dB are obtained with macrobending at the wavelength region between 1480 and 1530 nm. The macrobending also reduces the noise figure of the EDFA at wavelengths shorter than 1525 nm with a maximum improvement of 25 dB.     

A review on <Superscript>90</Superscript>Y-labeled compounds and biomolecules

The field of therapeutic nuclear medicine is emerging rapidly as choice of treatment in oncology and other cellular malignancies. The growth of this branch of nuclear medicine is greatly facilitated by the introduction of a number of new radiopharmaceuticals and radionuclides. ⁹⁰Y-radiopharmaceuticals have confirmed their worth in medical and clinical areas in a very short span of time. The ⁹⁰Y is a radioisotope widely used for therapeutic purposes and considerable perfection has been made to understand the chemistry of ⁹⁰Y-labeled radiopharmaceuticals. The development of these radiopharmaceuticals can be made favorable by using appropriate buffer, incubation period, optimal pH, specific activity and reaction temperature. In this review, we have discussed the preparation of range of ⁹⁰Y transporting biological molecules such as antibodies radiolabeled peptides, antigens and microsphere with their clinical applications.     

Thermal analysis of CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> nanoparticles using surfactants CTAB and F-68

A study concerned to thermogravimetric analysis is performed in cesium dihydrogen phosphate (CsH₂PO₄) that was synthesized, using cetyltrimethylammonium-bromide (CTAB), polyoxyethylene-polyoxypropylene (F-68) and mixture of (F-68:CTAB) with two mole ratio 0.06 and 0.12 as surfactant. The dehydration behavior of particles was studied using thermal gravimetric analysis and differential scanning calorimetric. Subsequently, the experimental results indicated that the first dehydration temperature in the range of 237–239 °C upon heating, the second peaks occur at temperature range 290–295 °C and overlapping in the thermogravimetric events is observed. The mass loss values are obtained in the range of 6.62–6.97 wt% that is less than reported theoretical value 7.8 wt%. These values show well compatibility of reaction CsH₂PO₄ to Cs₂H₂P₂O₇ with 3.92 wt% whereas mass loss value of CsH₂PO₄ to CsPO₃ is less than theoretical value 7.8 wt%. The activation energy of two steps dehydration are calculated using Kissinger equation for the samples synthesized via CTAB and (F-68) with minimum value mass loss 6.62% and maximum value mass loss 6.97%, respectively. The calculation results reveal that the reaction rate in the first step (CsH₂PO₄ → Cs₂H₂P₂O₇) is faster than the second step (CsH₂PO₄ → CsPO₃). The weight loss values of the samples demonstrate that existence of CTAB can be considered as effective factor which prevents more weight loss during the dehydration process.     

Effective electrodeposition of Co-Ni-Cu alloys nanoparticles in the presence of alkyl polyglucoside surfactant

The effect of alkyl polyglucoside (APG) surfactant on the electrodeposition Co-Ni-Cu alloys nanoparticles has been investigated. In a typical electrodeposition experiment, it was found that as prepared Co-Ni-Cu alloys nanoparticles characteristics, such as size homogeneity, density, dispersion on the electrode substrate and the chemicals composition, depended strongly on the concentration of APG used in the reaction as well as the applied deposition potential. For the case of chemicals composition, low APG concentration (below CMC) was found to be effective for the preparation of excellent composition of the nanoalloys. Meanwhile, for the case of size homogeneity, density, and dispersion on the surface, high APG concentration (above CMC) and high deposition potential were preferred. It was also found that, at concentration above the CMC, the APG surfactant showed a metals ions deposition inhibition characteristic that caused increasing in the electrodeposition overpotential of the entire metals ions, namely cobalt, nickel and copper. As the result the copper was found to place a high percentage in the nanoalloys deposits. Owing to its simple procedure in controlling the composition and the nanoalloys growth characteristic, present approach should find a potential application in preparing Co-Ni-Cu magnetic nanoparticles for used in currently existing applications.