Nd0.67Sr0.33MnOy(Y＜3.0)中的自旋相关电致电阻效应

用固相反应法制备系列Nd0.67Sr0.33MnOy(y=3.00-2.80)多晶样品.样品输运性质表现出自旋相关电致电阻特征.对氧含量等于化学计量样品,在测量温度范围内电阻不随负载电流变化,I-V曲线符合线性欧姆定律.对氧含量低于化学计量样品,当高于某一特征温度时,电阻变化符合线性欧姆定律;但低于这一特征温度时,电阻大小与负载电流有关,I-V曲线偏离线性规律;在绝缘体-导体相转变点附近,样品电阻随负载电流增大而迅速减小,表现出巨大电致电阻效应.对于y=2.85样品,当电流从1μA增加到30μA时,电致电阻接近80%.这种自旋相关的电致电阻行为与氧含量和界面有很大关系.     

干涉测量用半导体激光器驱动电源

设计了一种可调制的高稳定度半导体激光器驱动电路。该电路的直流稳定度高达1.5×10-5，输出电流在0～200mA内连续可调，长时间工作（12h以上）电流变化小于1μA；在直流基础上注入100kHz～300kHz的调制电流，其调制深度为0～100mA连续可调，可实现在激光干涉测量中对光波频率和光波强度的调制。将该电路驱动的光栅外腔半导体激光器和辅助温度控制电路应用于光干涉测量技术中，得到了功率稳定、波长单一的激光输出，解决了激光器的跳模现象，完成了对远距离微小振动（纳米量级）的测量。     

Synthesis of PMHDO‐g‐PDEAEA well‐defined amphiphilic graft copolymer via successive living coordination polymerization and SET‐LRP

A series of well‐defined amphiphilic graft copolymer containing hydrophobic polyallene‐based backbone and hydrophilic poly(2‐(diethylamino)ethyl acrylate) (PDEAEA) side chains was synthesized by sequential living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO) and single electron transfer‐living radical polymerization (SET‐LRP) of 2‐(diethylamino)ethyl acrylate (DEAEA). Ni‐catalyzed living coordination polymerization of MHDO was first performed in toluene to give a well‐defined double‐bond‐containing poly(6‐methyl‐1,2‐heptadiene‐4‐ol) (PMHDO) homopolymer with a low polydispersity (M_w/M_n = 1.10). Next, 2‐chloropropionyl chloride was used for the esterification of pendant hydroxyls in every repeating unit of the homopolymer so that the homopolymer was converted to PMHDO‐Cl macroinitiator. Finally, SET‐LRP of DEAEA was initiated by the macroinitiator in tetrahydrofuran/H₂O using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system to afford well‐defined PMHDO‐g‐PDEAEA graft copolymers (M_w/M_n ≤ 1.22) through the grafting‐from strategy. The critical micelle concentration (cmc) was determined by ?uorescence spectroscopy with N‐phenyl‐1‐naphthylamine as probe and the micellar morphology was visualized by transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Practical way for the synthesis of 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides by phosphonylation of in situ generated o-quinone methides

Phosphonylation of the pretreated 2-(hydroxymethyl)phenol derivatives with acetic anhydride using trialkylphosphites as the nucleophilic reagents was reported, providing a practical way to the synthesis of novel highly steric 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides.     

多壁纳米碳管修饰玻碳电极不可逆双安培法测定Fe~（3＋）

在玻碳电极上成功制备了多壁碳纳米管（MWNTs）修饰玻碳电极（GCE）,并对其进行显微表征。研究表明,该修饰电极（MWNTs/GCE）对Fe3＋具有明显的电催化还原作用。将其用于流动注射不可逆双安培（FI-IB）体系的构建,即：利用Fe3＋在MWNTs/GCE上的还原和硫酸羟胺（（NH2OH）2.H2SO4）在另一支金...     

Novel perfluorocyclobutyl aryl ether‐based well‐defined amphiphilic block copolymer

A series of fluorine‐containing amphiphilic diblock copolymers comprising hydrophobic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) (PTPFCBPMA) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments were synthesized via successive reversible addition fragmentation chain transfer (RAFT) polymerizations. RAFT homopolymerization of p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate was first initiated by 2,2′‐azobisisobutyronitrile using cumyl dithiobenzoate as chain transfer agent, and the results show that the procedure was conducted in a controlled way as confirmed by the fact that the number‐average molecular weights increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.30. Dithiobenzoate‐capped PTPFCHPMA homopolymer was then used as macro‐RAFT agent to mediate RAFT polymerization of 2‐(diethylamino)ethyl methacrylate, which afforded PTPFCBPMA‐b‐PDEAEMA amphiphilic diblock copolymers with different block lengths and narrow molecular weight distributions (M_w/M_n ≤ 1.28). The critical micelle concentrations of the obtained amphiphilic diblock copolymers were determined by fluorescence spectroscopy technique using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the formed micelles were investigated by transmission electron microscopy and dynamic light scattering, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Block copolymer containing poly(3‐hexylthiophene) and poly(4‐vinylpyridine): Synthesis and its interaction with CdSe quantum dots for hybrid organic applications

Poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer was synthesized by RAFT polymerization of 4‐vinyl pyridine using a trithiocarbonate‐terminated poly(3‐hexylthiophene) macro‐RAFT agent. The optoelectronic properties and the morphology of the block copolymer blends with CdSe quantum dots were investigated. UV‐vis and fluorescence experiments were performed to prove the charge transfer between CdSe and poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhancement of OFET performance of semiconducting polymers containing benzodithiophene upon surface treatment with organic silanes

Poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P1 ) homopolymer and poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene ‐alt‐thiophene} ( P2 ) alternating copolymer have been synthesized by Stille coupling polymerization. The field‐effect mobilities of both polymers were measured on both untreated and silane‐treated OFET devices. Various silanes were selected to allow an incremental increase in the hydrophobicity of the silicon dioxide dielectric. A direct correlation was observed between the hydrophobicity of the silicon dioxide dielectric surface and the enhancement of the field‐effect mobilities. The highest mobilities for both polymers were measured on the OFET devices treated with heptadecafluoro‐1,1,2,2‐tetrahydro‐decyl‐1‐trimethoxysilane (FS) which generated the most hydrophobic surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011