Kinetic Spectrophotometric Determination of Trace Amounts of Nitrite by Catalytic Reaction between Methylthymol Blue and Bromate

A kinetic spectrophotometric method for determination of trace nitrite in two dynamic ranges (2–100 and 100–500 ng/mL) based on its catalytic effect on the reaction between methylthymol blue and potassium bromate in acidic (sulfuric acid) media is described. The reaction was monitored spectrophotometrically by measuring the decreasing color of methylthymol blue at 437 nm by the fixed‐time method of 4.0 min at 30°C. The detection limit is 0.6 ng/mL, and the relative standard deviations for 50.0 and 250.0 ng/mL nitrite are 1.6% and 1.3%, respectively. The method was used for the determination of nitrite in water samples.     

Stability-Indicating HPTLC Assay for Leuprolide Acetate

JPC – Journal of Planar Chromatography – Modern TLC - A new stability-indicating HPTLC assay has been established for leuprolide acetate. Silica gel 60F254 was used as stationary phase....     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

1H NMR Study of Hindered Internal Rotation of Tetramethylthiuram Disulfide in Binary Dimethyl Sulfoxide‐Chloroform Mixtures

Hindered internal rotation about the C‐N single bonds joining the thiuram disulfide was studied by ¹H NMR complete line‐shaped analysis in different dimethyl sulfoxide‐chloroform (DMSO‐CDCl₃) mixtures. From the temperature dependence of methyls proton spectra, activation parameters (E_a, ΔH^≠, ΔS^≠, and ΔG^≠) were obtained. The Arrhenius plots showed a distinct isokinetic temperature at about 35 °C at which the exchange rate is more or less independent of the solvent composition. The resulting ΔH^≠ against TΔS^≠ plot showed a firmly good linear correlation, indicating the existence of an enthalpy‐entropy composition in an exchange process.     

Synthesis and structural characterization of a new heterobimetallic coordination complex of barium and cobalt for use as a precursor for chemical vapor deposition

Ba(dmae)2 (dmaeH=N,N-dimethylaminoethanol, C4H11NO) reacts with Co(acac)2 (acac=2,4-pentanedionate) to produce the trinuclear coordination complex [Ba2Co(acac)4(dmae)3(dmaeH)] in an 85% yield. Spectroscopic and single-crystal X-ray diffraction experiments indicate that the complex possesses a structure in which two barium atoms and a cobalt atom are bridged by acac and dmae groups. The barium centers are eight and nine coordinate with BaO7N and BaO7N2 coordination spheres while the cobalt is a more regular CoO5N octahedron. This 2:1 heterobimetallic molecular complex was investigated as precursor for the deposition of thin film by AACVD. The film was characterized by SEM and XRD. TGA shows that the complex starts thermal decomposition upon heating in nitrogen atmosphere at 105 degrees C to produce barium cobalt oxide material of a Ba2CoO3 composition with an orthorhombic structure. The synthetic approach detailed here represents a unique route to the formation of a heterobimetallic barium cobalt coordination complex.     

Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

A novel direct method for preparation of aromatic polyimides via microwave-assisted polycondensation of aromatic dianhydrides and diisocyanates

Possibility of imide structure formation under microwave irradiation of molecules containing anhydride and isocyanate functional groups was investigated. The microwave-assisted polycondensation of aromatic diisocyanates and dianhydrides for preparation of polyimides was studied. The effect of microwave irradiation time and power, solvent nature, solid content of monomers, effect of catalyst, effect of polymerization reactor material and possibility of pressure development during polymerization, on the inherent viscosity of prepared polyimides were discussed. Experimental results showed that polymers obtained via this method had superior inherent viscosity and yield in comparison to the polymers obtained via conventional solution method.     

Structural Elucidation of {[(CH3)2SnCl2·H2O]2·18-crown-6} n and its Hydrogen Bonding in Solution by HMBC Spectroscopy

Behavior of {[(CH₃)₂SnCl₂·H₂O]₂·18-crown-6}_n in solution have been investigated by HMBC NMR. The results show that coordination of water to tin containing species and its hydrogen bonding to crown ether remains intact in non-coordinating solvent in contrast to coordinating solvent. H-NMR reveals that the chemical shift of water in complex varies by solvent of crystallization.     

Light scattering studies of copolymers. 1. Soluble hemoglobin--dextran complexes

Complexes between dextrans of different molar mass and bovine hemoglobin were synthesized by two different methods. In the alkylation method three and in the dialdehyde method, two hemoglobins are coupled on average to one dextran molecule. In both cases, the soluble hemoglobin-dextran complexes reversibly bind and release oxygen; the oxygen affinity is greater than that of free hemoglobin. Static and dynamic light scattering was used to determine the average molar mass M_u, the radius of gyration 〈S〉, and the hydrodynamic radius R_h of both the complexes and the single dextrans. Interpretation of these data is complicated due to the fact that the complexes are copolymers. When appropriate approximations are made, the results indicate that the complexes have a spherical shape and an internal structure of a multiple-chain network, where several dextrans are linked together by the hemoglobins. The number of single dextrans per complex increases as the molar mass of the single dextrans is decreased. The increment is greater in the dialdehyde than in the alkylation method. The probable reason is that in the dialdehyde method one hemoglobin can connect many dextrans simultaneously while in the alkylation method a hemoglobin is able to link maximally two dextrans. The ratio of the radius of gyration to the hydrodynamic radius decreases as the temperature is increased. This suggests a decrease of the solvent penetration length for the complexes and can be interpreted on the basis of the Deutsch-Felderhof theory for porous spheres. © 1994 John Wiley & Sons, Inc.     

On the nilpotent * - Fourier transform

LetG be a nilpotent Lie group. The adapted nilpotent Fourier transform was introduced by D. Arnal and J. C. Cortet,:L(G) C (V,L(^2d )), whereL(G) is the Schwartz space ofG andV × ^2k is aG-invariant Zariski open set ing ^* the dual of the Lie algebra ofG. We prove the surjectivity of this transformation, which allows us to extend it to distribution spaces.