Synthesis of planar-chiral paracyclophanes via samarium(II)-catalyzed intramolecular pinacol coupling

[reaction: see text] A series of [n]paracyclophanediols (n = 8-12) was synthesized by samarium-catalyzed pinacol coupling for their ansa-bridge formation. Enantiomerically pure [n]paracyclophane esters were derived from the diols in a several steps via chiral resolution (for n = 10) or via crystallization-induced asymmetric transformation (for n = 11) by using amino alcohol auxiliaries and their selective cleavages.     

Reduced viscosity polymer matrices for microchip electrophoresis of double-stranded DNA

On a polymethylmethacrylate (PMMA) microchip, double-stranded DNA fragments with a wide size range from 50 bp to 20 kbp were separated by two polymer solutions. One was a hydroxypropylmethylcellulose-4000 (HPMC-4000) solution of 1.3% (w/v) to separate fragments below 590 bp, and another was a mixed four molecular weight poly(ethylene oxide) solution at a total concentration of 0.1% to separate fragments above 520 bp. The widths at half height (wh) of the fragments had a good relationship with their migration times (tR) in both polymer solutions. Such a relationship was suitable for obtaining the wh values of unresolved peaks, calculating the resolution of two adjacent fragments, and optimizing microchip separation matrices. Based on the relativity, a low viscosity medium containing 2% HPMC-50 and 8% glucose was optimized for high-performance separation of a phiX174 HaeIII restriction fragment digest.     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

Origin of visible-light-driven photocatalysis: A comparative study on N/F-doped and N-F-codoped TiO2 powders by means of experimental characterizations and theoretical calculations

An overall comparative study was carried out on N-doped, F-doped, and N-F-codoped TiO₂ powders (NTO, FTO, NFTO) synthesized by spray pyrolysis in order to elucidate the origin of their visible-light-driven photocatalysis. The comparisons in their experimentally obtained characteristics were based on the analysis of XPS, UV-Vis, PL, NH₃-TPD and ESR spectra. The comparisons in their theoretically predicted properties were based on the analysis of the calculated electronic structures. As the results, N-doping into TiO₂ resulted in not only the improvement in visible-light absorption but also the creation of surface oxygen vacancies. F-doping produced several beneficial effects including the creation of surface oxygen vacancies, the enhancement of surface acidity and the increase of Ti³⁺ ions. Doped N atoms formed a localized energy state above the valence band of TiO₂, whereas doped F atoms themselves had no influence on the band structure. The photocatalytic tests indicated that the NFTO demonstrated the highest visible-light activity for decompositions of both acetaldehyde and trichloroethylene. This high activity was ascribed to a synergetic consequence of several beneficial effects induced by the N-F-codoping.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

Novel synthesis of 1,3-dienes from 1-alkenes via /ldene/rd reaction with pummerer rearrangement product: a short synthesis of the sex pheromone of the red bollworm moth

A Pummerer rearrangement product, 4-chlorophenylthiomethyl trifluoroacetate (6), obtained from 4-chlorophenyl methyl sulfoxide (5) and trifluoroacetic anhydride, reacted with 1-alkenes in trifluoroacetic acid to give the ene products 8, which were readily converted into the terminal 1,3-dienes 10 by oxidation and subsequent pyrolysis. Using this method, 9,11-dodecadien-1-yl acetate (12), a sex pheromone of the red bollworm moth, was synthesized.     

Simons electrochemical fluorination of substituted homopiperazines(hexahydro-1,4-diazepines) and piperazines

Simons electrochemical fluorination (ECF) of 1,4-dimethyl-1,4-homopiperazine, methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine was studied. For comparison, ECF of three piperazines with a N-(methoxycarbonylmethyl) group(s) was also studied. ECF of 1,4-dimethyl-1,4-homopiperazine gave a low yield of corresponding perfluoro(1,4-dimethyl-1,4-homopiperazine) together with perfluoro(2,6-diaza-2,6-dimethylheptane) as the major product. Corresponding perfluoro(homopiperazines) with mono- and/or di-(fluorocarbonyldifluoromethyl) groups [CF₂C(O)F] at the 1- and/or 4-position were formed in low yields from methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine, respectively. These new seven-membered perfluoro(1,4-dialkyl-1,4-homopiperazines) were accompanied by the formation of mono- and/or di-basic linear perfluoroacid fluorides resulting from the CC bond scission at the 2- and 3-positions of the ring. From mono- and/or di-N-(methoxycarbonylmethyl)-substituted piperazines, corresponding perfluoropeperazines having the acid fluoride group(s) were formed in low yields.     

Cross-linking of polyolefins: a study by thermoporosimetry with benzene derivatives as swelling solvents.

The solvents o-, m-, p-xylene, p-dichlorobenzene, 1,2,4-trichlorobenzene, and naphthalene were calibrated as condensates used in the thermoporosimetry technique. Exponential relationships were found connecting the pore radii R(p) (in nm) and the freezing-point depression of the swelling solvent deltaT (in degrees C) on the one hand and the apparent energy of crystallization W(a) (in J cm(-3)) and deltaT on the other hand: R(p) = t exp[-1/(c deltaT)]; W(a) = W0 exp(deltaT/f). Pore- or mesh-size distributions can be derived from differential scanning calorimetry results by using the following equation: dV(p)/dR(p) = k{[cY(T)deltaT2]/[W(a)R(p)]}. All the numerical parameters were determined. Polyethylene and polypropylene samples, cross-linked with high-energy electrons or gamma-rays, were submitted to thermoporosimetry study. Relative mesh-size distributions, which depend on the polymer/solvent pair, were calculated for these polyolefins with o-, m-, and p-xylene as solvent and were found to be in the same sequence as those of their degrees of swelling and the irradiation doses received.