Oxidation reactions of indapamide. A novel route to the indole derivative,N-(3-sulfamyl-4-chlorobenzamido)-2-methylindole

Indapamide ( 1 ) is readily oxidized with mild oxidizing agents to the indole derivative 2 . Dehydrogenation of indapamide is a convenient one step synthesis of a complex indole compound.     

Aromatization of methane over different Mo-supported catalysts in the absence of oxygen

Both acidity and structure of the support are important factors in converting methane to aromatics. Lower SiO₂/Al₂O₃ ratio seems to favor the aromatization of methane over the Mo/HZSM-5 catalyst. When Pt is added as a modifier the activity of Mo/HZSM-5 catalyst will decrease slightly, but coke formation will enhanced.     

Thermodynamic studies of monuron

Monuron (C₉H₁₁ClN₂O; N,N-dimethyl-N′-(4-chlorophenyl) urea, CAS 150-68-5) was synthesized and the heat capacities of the compound were measured in the temperature range from 79 to 385 K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The enthalpy and entropy data of the compound relative to the reference temperature 298.15 K were derived based on the heat capacity data. The thermodynamic properties of the compound were further investigated through DSC and TG analysis. The melting point, the molar enthalpy, and entropy of fusion were determined to be 447.6±0.1 K, 29.3±0.2 kJ mol⁻¹, and 65.4 J K⁻¹ mol⁻¹, respectively.     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

Density functional theory studies on the Raman and IR spectra of meso-tetraphenylporphyrin diacid

The vibrational spectra of meso-tetraphenylporphyrin diacid (H4TPP2+) have been studied with the density functional theory. Raman and IR spectra of H4TPP2+ and its N-deuterated analogue (D4TPP2+) are measured and compared with the computational results. Complete assignments of observed IR and Raman bands were proposed on the bases of calculation results. The DFT calculations reproduce 140 observed fundamentals with the RMS 8.6 cm-1. The computational as well as the experimental results reveal that the saddle-distortion of porphyrin macrocycle for the diacid leads to a significant effect on its vibrational spectra. Especially, several out-of-plane skeletal modes, which were either unobserved or very weak in the Raman spectra of CuTPP and H2TPP, are activated in the Raman spectra of the diacids. In addition, enhancement for the Raman bands of phenyl CC stretching modes were observed and attributed to the conjugation effect of pi-systems of the phenyl and the porphyrinato macrocycles.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

手性胺酰胺型液相色谱手性固定相的制备及几种氨基酸衍生物的拆分

用(R)-1-苯基2-对甲基苯基乙基胺(PTE)与L-异亮氨酸制得含两个手性中心的手性选择剂,以琥珀酸酐作为连接臂,将手性选择剂键合到氨基丙基硅胶上制得手性固定相。以正己烷-异丙醇为流动相,利用该固定相对氨基酸衍生物进行高效液相色谱手性拆分,并考察了流动相中异丙醇含量对手性拆分的影响。结果表明,该手性固定相对所分析的氨基酸衍生物大部分都具有一定的拆分能力。当异丙醇含量为1%时,亮氨酸与苯丙氨酸的苯甲酰甲酯衍生物获得基线分离。当异丙醇含量为20%时,亮氨酸、缬氨酸、丙氨酸、谷氨酸的3,5-二硝基苯甲酰甲酯衍生物获得基线分离。     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Copper(II)-catalyzed ether synthesis from aliphatic alcohols and potassium organotrifluoroborate salts

[reaction: see text] A protocol for the copper(II)-catalyzed etherification of aliphatic alcohols under mild and essentially neutral conditions is described. Air- and moisture-stable potassium alkenyl- and aryltrifluoroborate salts undergo cross-coupling with a variety of aliphatic primary and secondary alcohols and phenols, and are tolerant of a range of functional groups. The optimized conditions utilize catalytic copper(II) acetate with 4-(dimethylamino)pyridine as ligand in the presence of 4 A molecular sieves under an atmosphere of oxygen.