Thermal characterization and compatibility studies of perovskite-type Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxide with Cr2O3 at high temperature

The chemical compatibility of perovskite-type Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) oxides with Cr₂O₃ has been examined between room temperature and 1,100 °C. Differential thermal analysis and thermogravimetric analysis were used to analyze the thermal behavior of BSCF–Cr₂O₃ binary mixtures in all composition ranges (0–100 mass% BSCF). The reaction products were identified by X-ray analysis after heating at 700–1,100 °C. As we expected, it was found that perovskite-type BSCF oxide had a poor chemical compatibility with the Cr₂O₃ oxide. In particular, the decomposition process of the BSCF–Cr₂O₃ binary mixture is quite complex and it starts at about 700–750 °C. The mixtures of BSCF and Cr₂O₃ oxides reacted forming mixed complex oxides based on (Ba/Sr)FeO₃, (Co/Fe)CrO₄, and (Ba/Sr)CrO₄ mixtures.     

Effect of temperature on the equilibrium and kinetics of galactose,glucose, and lactose adsorption on a cation exchanger

Galacto-oligosaccharides are typically produced by an enzymatic reaction when the post-reaction mixture contains considerable amounts of lactose and glucose and a smaller amount of galactose. In order to develop a process of chromatographic removal of saccharide impurities, adsorption equilibria and kinetics of these di- and monosaccharides were investigated for Diaion UBK 530, an industrialgrade strong cation-exchanger in the Na⁺ form. Frontal chromatographic experiments were carried out in the temperature range of 30–70°C and a broad interval of saccharide concentrations up to 350 g L^?1. Breakthrough curves were described using the equilibrium-dispersive model with the linear adsorption isotherm. Both the distribution and the axial dispersion coefficient values depended on the saccharide molecule type and size. No significant effect of temperature or concentration on the distribution coefficient was observed. The apparent dispersion coefficients of all saccharides exhibited some decrease with the temperature, which was caused by the decrease of the intraparticle mass transfer resistance. An analysis showed that both the intraparticle mass transfer and the axial dispersion had a significant influence on the front dispersion.     

Unexpected Correlation Between Boron Chain Condensation and Hydrogen Evolution Reaction (HER) Activity in Highly Active Vanadium Borides: Enabling Predictions

Transition‐metal borides (TMBs) have recently attracted attention as excellent hydrogen evolution (HER) electrocatalysts in bulk crystalline materials. Herein, we show for the first time that VB and V₃B₄ have high electrocatalytic HER activity. Furthermore, we show that the HER activity (in 0.5 m H₂SO₄) increases with increasing boron chain condensation in vanadium borides: Using a ?23 mV overpotential decrement derived from ?0.296 mV (for VB at ?10 mA cm^?2 current density) and ?0.273 mV (for V₃B₄) we accurately predict the overpotential of VB₂ (?0.204 mV) as well as that of unstudied V₂B₃ (?0.250 mV) and hypothetical “V₅B₈” (?0.227 mV). We then derived an exponential equation that predicts the overpotentials of known and hypothetical V_xB_y phases containing at least a boron chain. These results provide a direct correlation between crystal structure and HER activity, thus paving the way for the design of even better electrocatalytic materials through structure–activity relationships.     

Influence of cell packing by centrifugation on 40-MHz ultrasound backscatter

High-frequency ultrasound (HFUS) signals backscattered from RBL-2H3 cell pellets prepared under different centrifugal forces were analyzed to investigate the packing effect of cell aggregates. The measurements were performed in a pulse-echo setup with a 40-MHz transducer. The changes of ultrasound signals from cell pellet in backscattered power, statistical parameter, and pellet thickness were monitored after centrifugation at between 100g and 1600g. Experimental results showed that the HFUS backscattered power from cell pellets was inversely proportional to centrifugal force and increased to a plateau within 1-2 h after centrifugation. The initial thickness of cell pellets decreased with higher centrifugal force, but the changes in thickness and time that took to reach a plateau increased at higher centrifugal force. The envelope statistics of backscattered signals with Nakagami distribution indicates that the centrifugal force and elapsed time after centrifugation affected the backscattering characteristics. The present study suggests that centrifugal force and data acquisition time after cell pellet formation should be considered in in vitro cell packing method with centrifugation to emulate the tissue in vivo.     

Osmium tetroxide-(QN)2PHAL in an ionic liquid: a highly efficient and recyclable catalyst system for asymmetric dihydroxylation of olefins

In Os-catalysed asymmetric dihydroxylation using NMO as a co-oxidant, the combination of an ionic liquid and the new bis-cinchona alkaloid 2 generated in situ from (QN)2PHAL during reaction provided a simple and practical approach to the recycling of both catalytic components (osmium tetraoxide and chiral ligand).     

Synthesis of (+)-polyoxamic acid and D-sorbitol from simple achiral allylic halides employing (S,S)-hydrobenzoin as a chiral source

Coupling of cis-1-bromo-2-pentene and (S,S)-hydrobenzoin stannylene acetal followed by regio- and stereoselective transformations of the resulting allylic ether gave (+)-polyoxamic acid and a similar procedure was applied to the synthesis of D-sorbitol from trans-1-iodo-2-hexene.     

Indium trichloride mediated intramolecular Prins-type cyclization

[reaction: see text] Intramolecular Prins-type reactions of compounds having both functionalities of homoallyl alcohol and acetal moiety are described. The intramolecular Prins cyclizations were performed using indium trichloride in chloroform or 25% aqueous THF. Both 9-oxabicyclo[3.3.1]nonane and 3,9-dioxabicyclo[3.3.1]nonane compounds were successfully obtained in moderate yields.