Intramolecular Hydrogen Bonding: The Case of β‐Phosphorylated Nitroxide (= Aminoxyl) Radical

Alkoxyamines and persistent nitroxide (= aminoxyl) radicals are important regulators of nitroxide‐mediated radical polymerization. Since polymerization times decrease with the increasing homolysis rate constant of the C? ON bond homolysis between the polymer chain and the aminooxy moiety, the factors influencing the cleavage rate constant are of considerable interest. It has already been shown that the value of the homolysis rate constant k_d is very sensitive to the stabilization of both released radical species. X‐Ray, EPR, and kinetic data showed that the intramolecular H‐bonding radical in the 1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl 2‐hydroxy‐1,1‐dimethylethyl nitroxide ( 3a ) (homologue of 2‐hydroxy‐1,1‐dimethylethyl 1‐phenyl‐2‐methylpropyl nitroxide ( 2a )) did not occur with the nitroxide moiety as expected but with the phosphoryl group. However, the polymerization rate of styrene (= ethenylbenzene) was significantly enhanced.     

New hybrid bidentate ligands as precursors for smart catalysts

1-Phosphanorbornadiene derivatives were grafted onto various periodically organized mesoporous powders, including a new zirconia/silica mixed oxide synthesized by aerosol techniques. After complexation with the [Rh(CO)2]+ fragment, these materials were revealed to be more active in olefin hydrogenation than their homogeneous counterparts. The reasons for this higher activity are discussed in the light of theoretical modeling. Various surface treatments, such as esterification, drying, and functionalization with PhSi(OEt)3, provided insights into the nature and mechanism of formation of the active species. Zirconia-based materials were found to be active in internal olefin hydroformylation. Investigation of the mechanism of this reaction shows that the isomerization step is catalyzed by the Lewis acidic support, whereas the hydroformylation step is driven by the rhodium catalyst. Dissociation of these two steps leads to enhancement of activity.     

Theory of DNA electrophoresis: a look at some current challenges

Although electrophoresis is one of the basic methods of the modern molecular biology laboratory, new ideas are being suggested at an accelerated rate, in large part because of the pressing demands of the biomedical community. Although we now have, at least for some methods, a fairly good theoretical understanding of the physical mechanisms that lead to the observed peak spacings, widths and shapes, this knowledge is often too qualitative to be used to guide further technical developments and improvements. In this article, we review some selected elements of the current state of our theoretical ignorance, focusing mostly on DNA electrophoresis, and we offer several suggestions for further theoretical investigations.     

Effect of mono- versus di-ammonium cation of 2,2'-bithiophene derivatives on the structure of organic-inorganic hybrid materials based on iodo metallates

2,2'-bithiophene derivatives, 5-ammoniumethylsulfanyl-2,2'-bithiophene (AESBT) and 5,5'-bis(ammoniumethylsulfanyl)-2,2'-bithiophene (BAESBT), have been designed for their incorporation in organic-inorganic materials based on iodometalates. Three layered compounds, (BAESBT)PbI(4), (AESBT)(4)Pb(3)I(10), and (AESBT)(3)Bi(2)I(9), have been synthesized as crystals from slowly cooled aqueous solution containing metal halide and bithiophene derivative salts. When starting from the diammonium cation, (BAESBT)PbI(4) hybrid perovskite is obtained. (BAESBT)PbI(4) adopts a triclinic cell (P1) with the lattice parameters a = 8.4741(5) A, b = 8.9255(6) A, c = 16.876(1) A, alpha = 88.328(5) degrees, beta = 81.806(4) degrees, gamma = 88.864(5) degrees, Z = 2. In the structure, PbI(4)(2)(-) perovskite sheets and diammonium cation layers alternate along c. The incorporation of the corresponding monoammonium cation (AESBT) leads to a head to tail arrangement of the molecules in the (AESBT)(4)Pb(3)I(10) hybrid, precluding the formation of the perovskite layers. (AESBT)(4)Pb(3)I(10) is orthorhombic, Pna2(1), with a = 38.333(4) A, b = 22.239(3) A, c = 8.448(2) A, Z = 4. The structure consists of corrugated layers of Pb(3)I(10)(4)(-) separated by organic layers of monoammonium cations. A similar relative situation of molecules in organic layers is observed in (AESBT)(3)Bi(2)I(9), with the inorganic sheets being built up from Bi(2)I(9)(3)(-) entities. (AESBT)(3)Bi(2)I(9) crystallizes in an orthorhombic cell (P2(1)2(1)2(1)) with a = 8.4564(6) A, b = 21.368(2) A, c = 30.747(2) A, Z = 4. In the three compounds, the molecular packings appear different, underlining the interplay between both organic and inorganic components. New packings are stabilized, as illustrated by an original mixed kappa-alpha type arrangement of the bithiophene units in (AESBT)(3)Bi(2)I(9). Furthermore, molecular interactions, especially of S.S type, appear stronger in the hybrids based on the monoammonium cations. The electrical conductivity of a (BAESBT)PbI(4) single crystal has also been investigated, revealing a semiconductive behavior with a characteristic energy of E(g) = 2.535 eV.     

The electrocrystallization of nickel on vitreous carbon A kinetic and structural study of nucleation and coalescence

FeOOH deposition films were formed on gold electrodes by polarization in an electrolyte containing Fe²⁺. The time dependence of the formation current suggests a diffusion-controlled formation process. The oxidation of Fe(CN)₆^4? at FeOOH films shows no Tafel-like behavior. It is assumed that the Fe²⁺ to form the film, as well as the Fe(CN)₆^4? to be oxidized, have to diffuse through an adherent, strongly hydrous layer of Fe(OH)₃ to the surface of FeOOH.     

Alkylchlorotins grafted to cross-linked polystyrene beads by a -(CH2)n- spacer (n=4, 6, 11): selective, clean and recyclable catalysts for transesterification reactions

Insoluble polystyrene grafted compounds of the type (P-H)(1-t){P-(CH2)n SnBu(p)Cl(3-p)}(t), (P-H)(1-t){P-(CH2)n SnBuO}(t) and (P-H)(1-t)[{P-(CH2)n SnBuCl}2O](t/2), in which (P-H) is a cross-linked polystyrene; n=4, 6, and 11; p=0 and 1; and t the degree of functionalisation, were synthesised from Amberlite XE-305, a polystyrene cross-linked with divinylbenzene. The compounds were characterised by using elemental analysis, and IR, Raman, solid-state 117Sn NMR, and 1H and 119Sn high-resolution MAS NMR spectroscopy. The influence of the spacer length and the tin functionality on the catalytic activity of these compounds, as well as their recycling ability, was assessed in the transesterification reaction of ethyl acetate with various alcohols. These studies showed significant differences in the activity of the catalysts interpreted in terms of changes in the mobility of the catalytic centres. Some of the supported catalysts could be recycled at least seven times without noticeable loss of activity. The residual tin content in the reaction products was found to be as low as 3 ppm.     

Syntheses; 77Se, 203Tl, and 205Tl NMR; and theoretical studies of the Tl2Se6(6-), Tl3Se6(5-), and Tl3Se7(5-) anions and the X-ray crystal structures of [2,2,2-crypt-Na]4[Tl4Se8].en and [2,2,2-crypt-Na]2[Tl2Se4](infinity)1.en

The 2,2,2-crypt salts of the Tl4Se8(4-) and [Tl2Se4(2-)]infinity1 anions have been obtained by extraction of the ternary alloy NaTl0.5Se in ethylenediamine (en) in the presence of 2,2,2-crypt and 18-crown-6 followed by vapor-phase diffusion of THF into the en extract. The [2,2,2-crypt-Na]4[Tl4Se8].en crystallizes in the monoclinic space group P2(1)/n, with Z = 2 and a = 14.768(3) angstroms, b = 16.635(3) angstroms, c = 21.254(4) angstroms, beta = 94.17(3) degrees at -123 degrees C, and the [2,2,2-crypt-Na]2[Tl2Se4]infinity1.en crystallizes in the monoclinic space group P2(1)/c, with Z = 4 and a = 14.246(2) angstroms, b = 14.360(3) angstroms, c = 26.673(8) angstroms, beta = 99.87(3) degrees at -123 degrees C. The TlIII anions, Tl2Se6(6-) and Tl3Se7(5-), and the mixed oxidation state TlI/TlIII anion, Tl3Se6(5-), have been obtained by extraction of NaTl0.5Se and NaTlSe in en, in the presence of 2,2,2-crypt and/or in liquid NH3, and have been characterized in solution by low-temperature 77Se, 203Tl, and 205Tl NMR spectroscopy. The 1J(203,205Tl-77Se) and 2J(203,205Tl-203,205Tl) couplings of the three anions have been used to arrive at their solution structures by detailed analyses and simulations of all spin multiplets that comprise the 205,203Tl NMR subspectra arising from natural abundance 205,203Tl and 77Se isotopomer distributions. The structure of Tl2Se6(6-) is based on a Tl2Se2 ring in which each thallium is bonded to two exo-selenium atoms so that these thalliums are four-coordinate and possess a formal oxidation state of +3. The Tl4Se8(4-) anion is formally derived from the Tl2Se6(6-) anion by coordination of each pair of terminal Se atoms to the TlIII atom of a TlSe+ cation. The structure of the [Tl2Se4(2-)]infinity1 anion is comprised of edge-sharing distorted TlSe4 tetrahedra that form infinite, one-dimensional [Tl2Se42-]infinity1 chains. The structures of Tl3Se6(5-) and Tl3Se7(5-) are derived from Tl4Se4-cubes in which one thallium atom has been removed and two and three exo-selenium atoms are bonded to thallium atoms, respectively, so that each is four-coordinate and possesses a formal oxidation state of +3 with the remaining three-coordinate thallium atom in the +1 oxidation state. Quantum mechanical calculations at the MP2 level of theory show that the Tl2Se6(6-), Tl3Se6(5-), Tl3Se7(5-), and Tl4Se8(4-) anions exhibit true minima and display geometries that are in agreement with their experimental structures. Natural bond orbital and electron localization function analyses were utilized in describing the bonding in the present and previously published Tl/Se anions, and showed that the Tl2Se6(6-), Tl3Se6(5-), Tl3Se7(5-), and Tl4Se8(4-) anions are electron-precise rings and cages.     

Synthesis and Characterization by (19)F and (125)Te NMR and Raman Spectroscopy of cis-ReO(2)(OTeF(5))(3) and cis-ReO(2)(OTeF(5))(4)(-), and X-ray Crystal Structure of [N(CH(3))(4)(+)][cis-ReO(2)(OTeF(5))(4)(-)

The pentafluorooxotellurate compound ReO(2)(OTeF(5))(3) has been synthesized from the reaction of ReO(2)F(3) with B(OTeF(5))(3) and structurally characterized in solution by (19)F and (125)Te NMR spectroscopy and in the solid state by Raman spectroscopy. The NMR and vibrational spectroscopic findings are consistent with a trigonal bipyramidal arrangement in which the oxygen atoms and an OTeF(5) group occupy the equatorial plane. The (19)F and (125)Te NMR spectra show that the axial and equatorial OTeF(5) groups of ReO(2)(OTeF(5))(3) are fluxional and are consistent with intramolecular exchange by means of a pseudorotation. The Lewis acid behavior of ReO(2)(OTeF(5))(3) is demonstrated by reaction with OTeF(5)(-). The resulting cis-ReO(2)(OTeF(5))(4)(-) anion was characterized as the tetramethylammonium salt in solution by (19)F and (125)Te NMR spectroscopy and in the solid state by Raman spectroscopy and X-ray crystallography. The compound crystallizes in the triclinic system, space group P&onemacr;, with a = 13.175(7) ?, b = 13.811(5) ?, c = 15.38(1) ?, alpha = 72.36(5)(o), beta = 68.17(5)(o), gamma = 84.05(4)(o), V = 2476(2) ?(3), D(calc) = 3.345 g cm(-)(3), Z = 4, R = 0.0547. The coordination sphere about Re(VII) in cis-ReO(2)(OTeF(5))(4)(-) is a pseudooctahedron in which the Re-O double bond oxygens are cis to one another.     

First examples of thallium chalcogenide cages. Syntheses, 77Se, 203Tl, and 205Tl NMR study of the Tl4Se5(4-) and Tl4Se6(4-) anions, the X-ray crystal structure of (2,2,2-crypt-K+)3Tl5Se5(3-), and theoretical studies

The Tl5Se5(3-) anion has been obtained by extracting KTlSe in ethylenediamine in the presence of 2,2,2-crypt. The salt, (2,2,2-crypt-K+)3Tl5Se5(3-), crystallizes in the triclinic system, space group P1, with Z = 2 and a = 11.676(2) A, b = 16.017(3) A, c = 25.421(5) A, alpha = 82.42(3) degrees, beta = 88.47(3) degrees, gamma = 69.03(3) degrees at -123 degrees C. Two other mixed oxidation state TlI/TlIII anions; Tl4Se5(4-) and Tl4Se6(4-), have been obtained by extracting KTlSe into liquid NH3 in the presence of 2,2,2-crypt and have been characterized in solution by low-temperature 77Se, 203Tl, and 205Tl NMR spectroscopy and were shown to exist as a 1:1 equilibrium mixture at -40 degrees C. The couplings, 1J(203,205Tl-77Se) and 2J(203,205Tl-203,205Tl), have been observed for Tl4Se5(4-) and Tl4Se6(4-) and have been used to arrive at the solution structures of both anions. Structural assignments were achieved by detailed analyses and simulations of all spin multiplets that comprise the 205,203Tl NMR spectra and that arise from natural abundance 205,203Tl and 77Se or enriched 77Se isotopomer distributions. The structures of all three anions are based on a Tl4Se4 cube in which Tl and Se atoms occupy alternate corners. There are one and two exo-selenium atoms bonded to thallium in Tl4Se5(4-) and Tl4Se6(4-), respectively, so that these thalliums are four-coordinate and possess a formal oxidation state of +3 and the remaining three-coordinate thallium atoms are in the +1 oxidation state. The structure of Tl5Se5(3-) may be formally regarded as an adduct in which Tl+ is coordinated to the unique exo-selenium and to two seleniums in a cube face containing the TlIII atom. The Tl4Se5(4-), Tl4Se6(4-), and Tl5Se5(3-) anions and the presently unknown, but structurally related, Tl4Se4(4-) anion can be described as electron-precise cages. Ab initio methods at the MP2 level of theory show that Tl4Se5(4-), Tl4Se6(4-), and Tl5Se5(3-) exhibit true minima and display geometrical parameters that are in excellent agreement with their experimental cubanoid structures, and that Tl4Se4(4-) is cube-shaped (Td point symmetry). The gas-phase energetics associated with plausible routes to the formation and interconversions of these anions have been determined by ab initio methods and assessed. It is proposed that all three cubanoid anions are derived from the known Tl2Se2(2-), TlSe3(3-), Se2(2-), and polyselenide anions that have been shown to be present in the solutions they are derived from.