Uranyl ion adsorption studies on synthesized phosphoryl functionalised MWCNTs: a mechanistic approach

Nickel hydroxide solubility has been studied in this work in different cementitious systems. Our results indicate that once Glenium^® 27, cement superplasticizer admixture, is added to water and then mixed with cement, this polymeric material is stabilized and not released back to the aqueous solution, with negligible effects on the mobility of nickel. Contrary to that, when Glenium^® 27 is added directly in solution at high dosages, an important effect is observed on nickel behaviour. Thermodynamic calculations indicate that the effect of such component on Ni is likely the effect that other small organics could have over this element.

     

Photoprotective Effect of Black Tea Extracts Against UVB-induced Phototoxicity in Skin

In previous studies, we showed that green tea and black tea extracts and their major polyphenolic constituents protect against UVB light-induced carcinogenesis in murine skin. All of these studies required chronic administration of tea extracts or specific constituents either topically or orally. However, it is not known whether acute or subchronic administration of black tea extracts or constituents can ameliorate UVB-induced early effects in skin. In the present study, cultured keratinocytes and mouse and human skin were employed to assess the effect of both oral and topical administration of standardized black tea extract (SBTE) and its two major polyphenolic subfractions namely BTF1 and BTF2 against UVB-induced photodamage. In SKH-1 hairless mice, topical application of SBTE (0.2 mg/cm2) prior to UVB exposure (180 mJ/cm2) resulted in 40% reduced incidence and 64% reduced severity of erythema and 50% reduction in skinfold thickness by day 6 when compared to nontreated UVB-exposed animals. The SBTE was also effective in protecting against UVB-induced erythema in human volunteers. Administration of SBTE 5 min after UVB irradiation was similarly effective in reducing UVB-induced inflammation in both murine and human skin. The major polyphenolic subfractions, BTF1 and BTF2, were also effective in protecting in mouse skin. The SBTE subfractions inhibited UVB-induced tyrosine phosphorylation of epidermal growth factor receptor (EGFR). The UVB irradiation of human epidermoid carcinoma cells resulted in 3.3-fold induction of tyrosine phosphorylation of EGFR. Pretreatment with BTF1 and BTF2 reduced tyrosine phosphorylation of EGFR by 53% and 31%, respectively. The UVB-mediated enhanced expression of the early response genes, c-fos and c-jun in human epidermal keratinocytes was reduced in a dose-dependent manner by SBTE. Topical application of SBTE was also effective in reducing accumulation of c-fos and p53 proteins by 82% and 78%, respectively, in UVB-exposed mouse skin. These data provide evidence that constituents of black tea can abrogate UVB-induced erythema and associated early events in murine and human skin.     

1,3,4-Oxadiazole, 1,3,4-thiadiazole and 1,2,4-triazole derivatives as potential antibacterial agents

Since the introduction of the first antibiotic (penicillin, 1942) into medical practice, to date, there has been an ongoing “race” between scientists creating new drugs and pathogenic bacteria. Antibiotic-bacteria are becoming progressively common, and to make matters worse, more and more bacteria are becoming resistant to all known antibiotics. The traditional method for this problem is to introduce new antibiotics that kill the resistant mutants. This specific “arms race” resulted into thousands of potentially active chemicals are synthesized in laboratories around the world every day.1,3,4-Oxadiazole; 1,3,4-thiadiazole; 1,2,4-triazole and some of their derivatives are involved in modifications at the following axes: First, attaching a thio-group into heterocyclic rings. Second, introducing different substitutions at position 5 which often are the residuals of the synthetic starting materials such as simple aliphatic, substituted aliphatic chains, aromatic carbocyclic and heterocyclic residues.     

Gold nanoparticles having dipicolinic acid imprinted nanoshell for Bacillus cereus spores recognition

Taking into account the recognition element for sensors linked to molecular imprinted polymers (MIPs), a proliferation of interest has been witnessed by those who are interested in this subject. Indeed, MIP nanoparticles are theme which recently has come to light in the literature. In this study, we have proposed a novel thiol ligand-capping method with polymerizable methacryloylamidocysteine (MAC) attached to gold nanoparticles, reminiscent of a self-assembled monolayer. Furthermore, a surface shell by synthetic host polymers based on molecular imprinting method for recognition has been reconstructed. In this method, methacryloyl iminodiacetic acid-chrome (MAIDA–Cr(III)) has been used as a new metal-chelating monomer via metal coordination–chelation interactions and dipicolinic acid (DPA) which is the main participant of Bacillus cereus spores has been used as a template. Nanoshell sensors with templates produce a cavity that is selective for DPA. The DPA can simultaneously chelate to Cr(III) metal ion and fit into the shape-selective cavity. Thus, the interaction between Cr(III) ion and free coordination spheres has an effect on the binding ability of the gold nanoparticles nanosensor. The interactions between DPA and MIP particles were studied observing fluorescence measurements. DPA addition caused significant decreases in fluorescence intensity because they induced photoluminescence emission from Au nanoparticles through the specific binding to the recognition sites of the crosslinked nanoshell polymer matrix. The binding affinity of the DPA imprinted nanoparticles has been explored by using the Langmuir and Scatchard methods and the analysis of the quenching results has been performed in terms of the Stern–Volmer equation.     

Evidence of 13 hybrid fluoroaluminates in the composition space diagram of the Al(OH)3–tren–HF–ethanol system

Thirteen phases are now evidenced in the composition space diagram of the Al(OH)₃–tren–HF–ethanol system at 190 °C. Solvothermal syntheses are performed under microwave heating. Six new organic–inorganic fluorides crystallise and their structures are determined: (H₃O)·[H₄tren]₂·(AlF₆)₃·6H₂O (P-1, Z = 2), [H₃tren]₂·(AlF₅(H₂O))₃·8H₂O (C2/c, Z = 8), [H₃tren]₄·(AlF₆)₂·(Al₂F₁₁)·(F)·10H₂O (P2₁/n, Z = 2), [H₃tren]₂·(Al₄F₁₈)·3.5H₂O (P6₃, Z = 2), [H₃tren]₂·(Al₄F₁₈) (P-1, Z = 1), and [H₃tren]₄·(Al₈F₃₅)·(OH)·H₂O (P-1, Z = 1). The existence domains are approximately located for all phases. Tren amine is tetraprotonated at high HF concentration, otherwise it is triprotonated. A protonated water cluster, H₃O⁺(H₂O)₆, appears in (H₃O)·[H₄tren]₂·(AlF₆)₃·6H₂O while a new Al₄F₁₈ unit, found in [H₃tren]₂·(Al₄F₁₈), is evidenced; it results from corner and edge sharing association of four AlF₆ octahedra. Finally, the structure of [H₃tren]₄·(Al₈F₃₅)·(OH)·H₂O revealed the largest known fluoroaluminate polyanion, built from eight vertex sharing AlF₆ octahedra, (Al₈F₃₅)¹¹⁻.     

Flow of a generalized Maxwell fluid induced by a constantly accelerating plate between two side walls

The unsteady flow of a viscoelastic fluid with the fractional Maxwell model, induced by a constantly accelerating plate between two side walls perpendicular to the plate, is investigated by means of the integral transforms. Exact solutions for the velocity field are presented under integral and series forms in terms of the derivatives of generalized Mittag–Leffler functions. The corresponding solutions for Maxwell fluids are obtained as limiting cases for β → 1. In the absence of the side walls, all solutions that have been determined reduce to those corresponding to the motion over an infinite plate.      

Photochemistry of desonide, a non-fluorinated steroidal anti-inflammatory drug

The photochemistry of anti-inflammatory drug desonide (De, 1) was studied in aerobic as well as in anaerobic condition with different irradiation wavelengths (254, 310 nm) in acetonitrile and 2-propanol. All photoproducts obtained were isolated and characterized on the basis of IR, (1)H-, (13)C-NMR spectroscopy and elemental analysis study. The products were: 11beta,21-dihydroxy-16alpha,17alpha-(1-methylethylidenedioxy)-1,5-cyclopregn-3-ene-2,20-dione 2 (254 nm), 11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 3 (310 nm/2-propanol), 17beta-hydroperoxy-11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 4 (310 nm/O(2)/2-propanol). Cyclohexadienone moiety in ring A and keto group at C(17) were found to be deeply modified by UV light therefore, loss of biological activity both during storage and in vivo can not be ruled out.     

Synthesis, characterization, and structural determination of polynuclear lithium aggregates and factors affecting their aggregation

The reaction of [(mu3,mu3-EDBP)Li2]2[(mu3-nBu)Li(0.5Et2O)]2 (1) [EDBP-H2 = 2,2'-ethylidenebis(4,6-di-tert-butylphenol)] with 1 equiv of ROH in toluene gave [(mu3,mu3-EDBP)Li2]2[(mu3-OR)Li]2 [R = Bn (2), CH2CH2OEt (3), and nBu (4)]. In the presence of 3 equiv of tetrahydrofuran (THF), the hexanuclear compound 1 slowly decomposed to an unusual pentanuclear Li complex, [(mu2,mu3-EDBP)2Li4(THF)2][(mu3-nBu)Li] (5). Further reaction of 5 with ROH gave [(mu2,mu3-EDBP)2Li4(THF)3][(mu4-OR)Li] [R = Bn (6), nBu (7), and CH2CH2OEt (8)] without a major change in its skeleton. Treatment of 2 with an excess of hexamethylphosphoramide (HMPA) yields [(mu2,mu2-EDBP)Li2(HMPA)2][(mu3-OBn)Li(HMPA)] (9). Compounds [(mu2,mu3-EDBP)2Li4(THF)][(mu4-OCH2CH2OEt)Li]2 (10) and [(mu2,mu2-EDBP)2Li4(mu4-OCH2CH2OEt)(HMPA)]-[Li(HMPA)4]+ (11) can be obtained by the reaction of 3 with an "oxygen-donor solvent" such as THF and HMPA, respectively. Among the compounds described above, 8 has shown great reactivity toward ring-opening polymerization of L-lactide, yielding polymers with very low polydispersity indexes in a wide range of monomer-to-initiator ratios.     

Improvement of piezoelectric transformer performances using SSHI and SSHI-max methods

The piezoelectric transformers reach densities of power more significant than their magnetic counterparts. However, one of the principal factors limiting the density of power is the acceptable maximum deformation by material constituting the transformer. The heating of the piezoelectric transformers is mainly of mechanical origin. This heating generates a degradation of the characteristics which in its turn generates an additional heating being able to lead to a phenomenon of thermal avalanche. In this work, two nonlinear methods [synchronized switch harvesting on inductor (SSHI) and SSHI-max] have been explored to improve the performance of the Rosen transformer basing on the tension generated by the secondary so as to increase the capacity of mechanic-electric conversion. The simulation results show that SSHI and SSHI-max techniques significantly increase the capacity of mechanic-electric conversion of inserts stuck on a vibrating structure and consequently, the power recovered in electric form. The comparative results of voltage gain, efficiency and the transmitted power of the transformer, before and after SSHI-max and SSHI control are given. These ones indicated that the two nonlinear techniques are promising as applications to improve the performances of the piezo-transformers.