Surface tension of talc and talc-chlorite mixtures

It is possible to estimate surface tension of high-energy solids combining the immersion microcalorimetry thermodynamics and Van Oss' model. In this study we have applied this method on talc and talc-chlorite samples in order to obtain thermodynamic values which permit to understand surface properties useful in the industrial applications of these solids. Some talcite samples are preferentially used in specific industrial applications because they are less hydrophobic or more lamellar. This method seems to be reliable to classify the solids and predict some properties.     

Chemical isolation of element 106 from aqueous solutions according to model experiments with short-lived tungsten isotopes

The short-lived isotopes of W and their descendants have been isolated from the products of the bombardment of¹⁴⁴Sm with²⁴Mg by a fast continuous ion-exchange method, using HF solution media. The feasibility of this method for isolation of element 106 is discussed.     

Trace determination of Tl, Cu, Pb, Cd, and Zn in specimens of the limnic environment using isotope dilution mass spectrometry with thermal ionization

Within the framework of the German Environmental Specimen Bank program, Tl, Cu, Pb, Cd and Zn were determined in homogenized materials from the limnic environment using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization. The analytical procedures which were developed for the trace metal analysis of bioindicator and sediment samples are described in detail. Results obtained in bream, mussels (Dreissena polymorpha) and sediments of Lake Constance/Estuary of Constance in the sampling years 1981, 1985, 1988, 1990, 1992 and 1993 are discussed and compared with those of bream from the lakeland district of Born-hoeved/Lake Belau and from the River Saar as well as from reference materials.     

Model calculations of interface segregation in dilute systems

Using a discrete model for the segregation kinetics based on the Darken theory of diffusion and on the regular solution model (RSM), one and two dimensional simulations of interface segregation in binary and ternary systems have been performed. The aim of the calculations was to investigate the kinetics of segregation sequences in ternary systems, the segregation kinetics in discrete systems during the initial phase and finally the kinetics of surface segregation in the region of a grain boundary intersected by the surface.     

Resonance ionization spectroscopy for trace analysis and fundamental research

Resonance ionization spectroscopy (RIS) and its combination with mass spectrometry (RIMS) have grown to become powerful techniques, which offer high sensitivity as well as elemental and isotopic selectivity. The principles of RIS and RIMS are introduced; they primarily concern the analysis of the optical spectra for the choice of efficient excitation schemes and the suitable design of the experimental apparatus. Recent applications span from studies of short-lived isotopes at on-line mass separators to a wide variety of trace analysis applications for radioactive isotopes, which can range from measurements of solar neutrino flux to environmental assessment.On leave from Pacific Northwest Laboratory, Richland, USA     

Calibration of depth profiles of microparticles measured with plasma-based secondary neutral mass spectrometry

A gravimetric method is presented for the easy determination of sputter erosion rates for powders, applicable also to non-conducting materials. Measurements of the erosion rates of 22 powders gave an average value of 0.4 nm/s ±50% for bombardment with 400 eV Ar⁺ at 1 mA/cm². The validity of the data has been demonstrated with technical pigments and outdoor aerosol particles.     

ARXPS-analysis and morphology of sputtered nanocrystalline TiC/SiC coatings

ARXPS (angle resolved X-ray photoelectron spectroscopy) measurements are used to obtain informations about surfaces and grain boundaries. Data acquired from nanocrystalline carbidic hard coatings have been employed to establish structural models. Magnetron-sputtered coatings of TiC, SiC and TiC/SiC were examined. In such coatings, partly defective TiC nanocrystallites are surrounded by interfacial carbide. This excess carbon shows a binding state similar to that of doped graphite or fullerenes. X-ray amorphous SiC is found in the residue. On top of sputtered SiC coatings, less oxide and graphite is found as compared to TiC/SiC or TiC coatings.     

Liquid crystalline hexa-amides and side chain polysiloxanes of azacrown [18]-N6

The hexa-4-dodecyloxybenzoyl derivative 1 of azacrown [18]-N₆ was originally reported to have a 'tubular' mesophase on the basis of its large central ring and 6-fold symmetry. Starting in the mesophase, annealing of 1 under a cover slip results in formation of a new crystalline phase that melts directly to an isotropic liquid at the temperature previously observed for the mesophase to isotropic transition. Thus the phase behaviour of 1 is kinetically controlled. The analogous hexa-3,4-bisdodecyloxybenzoyl derivative 2 of azacrown [18]-N₆ has no kinetic limitations to its phase changes and has an enantiotropic columnar liquid crystalline phase. We have synthesized side chain copolysiloxanes with a (CH₂)₁₁ spacer and 75-84 per cent by weight of the same 4-dodecyloxybenzoyl-[18]-N₆ mesogen. The polysiloxanes also display a liquid crystalline phase.     

Octahedral metallo-mesogens of chromium, molybdenum and tungsten with 1,4,7-trisubstituted 1,4,7-triazacyclononane and three carbonyl groups as ligands

Liquid crystalline complexes with chromium, molybdenum and with tungsten as metallic centres are reported. 1,4,7-Trisubstituted 1,4,7-triazacyclononane and three carbonyl groups are coordinated in an octahedral geometry. The observed mesophases are characterized as disordered rectangular columnar of a pyramidic type.     

A semiclassical reactive flux method for the calculation of condensed phase activated rate constants

A semi classical reactive flux algorithm for calculating thermally activated rate constants is presented which is based on a semi-classical transition state theory due to Chapman, Garrett and Miller [J. Chem. Phys. 63 (1975) 2710]. This reactive flux technique, when combined with the semiclassical TST, enables one to describe dynamical recrossings of the transition state on the same footing as tunneling effects. Most importantly, the method is readily applied to nonlinear multidimensional systems over a wide range of temperatures. It will be shown that the method works very well for a variety of existing models.