BOUNDEDNESS OF VECTOR-VALUED CALDERN-ZYGMUND OPERATORS ON HERZ SPACES WITH NON-DOUBLING MEASURES

In the paper we obtain vector-valued inequalities for Calder6n-Zygmund operator, simply CZO on Herz space and weak Herz space. In particular.we obtain vector-valued inequalities for CZO on Lq(Rd, |x|αdμ) space, with 1< q <∞, -n <α< n(q -1), and on L1,∞(Rd,|x|αdμ) space, with -n <α< 0.     

2,3,4,5,6‐Penta­nitro­aniline 1,2‐dichloro­ethane disolvate: `push–pull' deformation of aromatic rings by intra­molecular charge transfer

The title compound, C₆H₂N₆O₁₀·2C₂H₄Cl₂, forms layered stacks of penta­nitro­aniline mol­ecules, which possess twofold symmetry. The voids between these stacks are occupied by dichloro­ethane mol­ecules, which reside near a 2/m symmetry element and display pseudo‐inversion symmetry. The C atoms in one of the two solvent mol­ecules are threefold disordered. In the penta­nitro­aniline mol­ecule, considerable distortion of the benzenoid ring, coupled with the short C—N(H₂) bond and out‐of‐plane NO₂ twistings, point to significant intra­molecular `push–pull' charge transfer at the amino‐ and nitro‐substituted (ortho and para) positions, as theoretically quantified by natural bond orbital analysis of the π‐electron density.     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

光学扫描全息术中的孪生像噪音及消除

阐述了光学扫描全息术的基本原理,分析了孪生像噪音的来源,提出了一种新的数字滤波方法.计算机仿真结果表明:孪生像噪音以振荡形式传播,降低了重构图像的信噪比,影响了重构图像的分辨率;用电子复用技术,即用复全息图函数代替实全息图函数的方法可以有效地消除孪生像噪音;采用单一通道对信号进行处理,即只用一个实全息图函数,通过数字滤波方法同样可以消除孪生像噪音,该方法简便、实用而有效.     

变In组分沟道的MM-HEMT材料电子输运特性研究

在变缓冲层高迁移率晶体管（MM_HEMT）器件中，二维电子气的输运性质对器件性能起着决定作用.通过低温下二维电子气横向电阻的量子振荡现象，结合变温度的Hall测量，系统研究了不同In组分沟道MM_HEMT器件中子带电子迁移率和浓度随温度的变化关系.结果表明，沟道中In组分为0.65的样品，材料电学性能最好，In组分高于0.65的样品，严重的晶格失配将产生位错，引起迁移率下降，大大影响材料和器件的性能. 关键词： 变缓冲层高迁移率晶体管 Shubnikov_de Hass 振荡     

FDTD Method in the Analysis of Lithium Niobate Modulator

The Mach-Zehnder traveling-wave lithium niobate modulator is simulated by time domain finite difference (FDTD)method for different device geometry. The result is comparable to the reported value by finite element method.     

镧掺杂水滑石材料的热分解过程研究

采用共沉淀法制备了系列La掺杂改性的含Cu类水滑石,高温焙烧得到其衍生混合氧化物材料,并用XRD,TG-DSC,FT-IR等对材料进行表征.结果表明,前驱物XRD图谱呈典型的水滑石衍射特征且颗粒结晶良好;经800℃焙烧后,掺杂La2O3含量为5.1%的样品仅有Mg1-xFexO晶相出现,说明La的掺杂提高了材料的高温稳定性,混合氧化物中的Cu离子呈高分散状态.     

35Cr25Ni12奥氏体耐热钢中碳化物的电子显微分析

应用扫描电镜（SEM）和透射电镜（TEM）研究了长期使用前后的35Cr25Ni12奥氏体耐热钢中的碳化物演变行为；该钢固溶时效后的组织由初晶奥氏体及M23C6共晶碳化物组成，奥氏体基体中析出了二次M23C6，二次碳化物总是与基体保持立方－立方取向关系；长期使用（3、5年）后，奥氏体中析出的二次碳化物量明显增加，部分M23C6已转变为M6C，M6C与奥氏体基体以及二次碳化物M23C6保持[001]M6C//[221]A//[221]M23C6孪晶取向关系。     

Effect of Ultrashort Pulsed Laser and X-Ray Irradiation on Au+ -Doped Glass

Au nanoparticles were precipitated inside Au+-doped glass samples after irradiation by femtosecond laser or x-ray. Femtosecond laser and X-ray irradiation result in decreasing of anneal temperature and critical size for the precipitation of Au nanoparticles.