Discovery of Novel Non-Oxime Reactivators Showing In Vivo Antidotal Efficiency for Sarin Poisoned Mice

A family of novel efficient non-oxime compounds exhibited promising reactivation efficacy for VX and sarin inhibited human acetylcholinesterase was discovered. It was found that aromatic groups coupled to Mannich phenols and the introduction of imidazole to the ortho position of phenols would dramatically enhance reactivation efficiency. Moreover, the in vivo experiment was conducted, and the results demonstrated that Mannich phenol L10R1 (30 mg/kg, ip) could afford 100% 48 h survival for mice of 2*LD₅₀ sarin exposure, which is promising for the development of non-oxime reactivators with central efficiency.     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

有机化学多媒体教学的一些体会

针对有机化学课程特点,编写了适合课堂教学的有机化学电子教案,总结了有机化学多媒体教学实践的经验,提出了多媒体教学中应当注意的一些问题。     

Cr,Fe,Cu/Al2O3界面化学结构的光电子能谱

应用Ｘ－射线光电子能谱，通过离子刻蚀，原位研究第四周期过渡金属与氧化铝所形成界面的化学状态，结果表明，Ｃｒ，Ｆｅ在界面处有不同程度的氧化，氧化程度Ｃｒ＞Ｆｅ，而Ｃｕ则无明显氧化。化学成份的定量分析表明，界面过渡层的厚度与界面化学反应强弱直接相关。     

微波合成SrTiO3的工艺、结构与性能研究

应用微波会成这一材料合成新方法制备SrTiO3，研究了不同工艺条件下微波合成产物的结构，确定出制备纯净SrTiIO。的合成条件．对微波合成的工艺及其影响因素进行详细的探索，从合成产物的显微结构、粒度分布、比表面积、烧结性能等方面比较了微波合成与常规固相合成的差别，结果表明微波合成与各种常规方法相比有合成时间短、合成工艺简单、合成产物性能好等特点，是一种有发展潜力的材料合成技术．     

Simultaneous photocatalytic oxidation and adsorption for efficient As(III) removal by magnetic BiOI/γ-Fe2O3 core–shell nanoparticles

Addressing arsenite pollution in groundwater has drawn great attention. It is attractive to pre-oxidize highly mobile As(III) to relatively low-toxic As(V) with a subsequent adsorption separation process. Herein, BiOI anchoring on γ-Fe₂O₃ is performed to synthesize BiOI/γ-Fe₂O₃ core–shell nanoparticles for efficient removal of As(III) via a simultaneous photocatalytic oxidization–adsorption process. The physical and chemical structures of BiOI/γ-Fe₂O₃ are investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction measurements. The photoluminescence and electron spin resonance (ESR) characterization were employed to ascertain the possible reaction mechanism of visible-light-driven photocatalytic oxidation of As(III). Such BiOI/γ-Fe₂O₃ delivers a superior As(III) removal capability under visible light irradiation with an arsenic removal efficiency of 99.8% within 180 min, higher than those of BiOCl/γ-Fe₂O₃ (81.7%) and BiOBr/γ-Fe₂O₃ (98.9%). The optimal BiOI/γ-Fe₂O₃ (molar ratio of 2:1) is obtained by rationally adjusting the molar ratio of BiOI to γ-Fe₂O₃. The as-synthesized BiOI/γ-Fe₂O₃ performs well in a wide pH range of 2–8. Only coexisting PO₄^3? anions have a significant effect on the As(III) removal. The free radical trapping experiment and ESR results demonstrate that the ?O₂^? and h⁺ are the main active substances for the photocatalytic oxidation of As(III) on BiOI/γ-Fe₂O₃. This work not only gives a novel magnetic core–shell nanoparticle photocatalyst for efficient photocatalytic oxidation and adsorption of As(III) but also offers a new strategy to rationally design BiOX for its related practical applications.     

Accelerated Simulation Study of Space Charge Effects in Quadrupole Ion Traps Using GPU Techniques

Space charge effects play important roles in the performance of various types of mass analyzers. Simulation of space charge effects is often limited by the computation capability. In this study, we evaluate the method of using graphics processing unit (GPU) to accelerate ion trajectory simulation. Simulation using GPU has been compared with multi-core central processing unit (CPU), and an acceleration of about 390 times have been obtained using a single computer for simulation of up to 10⁵ ions in quadrupole ion traps. Characteristics of trapped ions can be investigated at detailed levels within a reasonable simulation time. Space charge effects on the trapping capacities of linear and 3D ion traps, ion cloud shapes, ion motion frequency shift, mass spectrum peak coalescence effects between two ion clouds of close m/z are studied with the ion trajectory simulation using GPU.     

柱前衍生化高效液相色谱荧光检测法测定桑叶中的1-脱氧野尻霉素

建立了芴甲氧酰氯(FMOC—Cl)柱前荧光衍生一高效液相色谱法测定桑叶中1-脱氧野尻霉素(DNJ)的方法。桑叶经0．05mol／L,盐酸提取,在pH8．5的硼酸盐缓冲溶液条件下,DNJ反应生成荧光产物,然后用高效液相色谱-荧光检测器测定。流动相为乙腈-0．1％醋酸(55：45,V/V)。线性范围为0．567～34mg／L(相关系数r=0．9999);检出限为0．03mg／L。实验测得桑叶中DNJ含量为0．24％;平均回收率为97．1％,RSD为1．35％(n=6)。     

微波场对SrTiO3化学合成中热过程的影响

在分析微波场中SrTiO3化学合成体系与电磁场相互作用的基础上,探讨合成体系在微波场中的加热机制和影响升温的主要因素（如合成体系的介电性质、保温材料的结构、生还的致密度等）,结果表明,TiO2和SrCO3在低温阶段对体系的升温速率的贡献相接近;高温阶段体系升温主要是TiO2的贡献,同时产物对升温有较大的影响。微波合成与常规合成再加热方式上的明显不同,对合成过程、合成时间等影响较大。