Structural evolution in amorphous silicon and germanium thin films.

The structural evolution in amorphous silicon and germanium thin films has been investigated by high-resolution transmission electron microscopy (HRTEM) in conjunction with autocorrelation function (ACF) analysis. The results established that the structure of as-deposited semiconductor films is of a high density of nanocrystallites embedded in the amorphous matrix. In addition, from ACF analysis, the structure of a-Ge is more ordered than that of a-Si. The density of embedded nanocrystallites in amorphous films was found to diminish with annealing temperature first, then to increase. The conclusions also corroborate well with the results of diminished medium-range order in annealed amorphous films determined previously by a variable coherence microscopy method.     

Synthesis and biological activity of S-oxo-[(methylthio)-methyl]cysteinols

A convenient route was developed to synthesize S-oxo-[(methylthio)-methyl]cysteinols on a large scale from cheap l-serine as the starting material. The structures of diastereoisomers were determined by NMR, CD spectra, and X-ray diffraction analysis. All four diastereoisomers were examined for their ability to inhibit certain bacteria from growing.     

Synthesis,structure, spectroscopic and magnetic properties of a novel two-dimensional copper(II) complex Na2[Cu(pba)] · 6H2O [pba = 1,3-propylenebis(oxamato)]

The copper(II) complex Na₂[Cu(pba)] · 6H₂O has been synthesized and its structure determined. It consists of a novel two-dimensional network of [Cu(pba)]^2– anions connected to each other through the sodium ion as a bridge. Spectroscopic and magnetic properties have been measured and a spin distribution calculation has been carried out with the GAUSSIAN-94. Theoretical calculations indicate the rather larger spin density on nitrogen atoms should be responsible for the satellite lines appearing beside the main hyperfine coupling signs of copper(II). The antiferromagnetic interaction may be due to the intermolecular interaction and/or different copper(II) ions through the Na⁺ bridge in the same layer.     

Synthesis of optically active 6-substituted 2-(aminomethyl)chromans

Three novel, optically active, 6-substituted 2-(aminomethyl)chromans were synthesized from readily available chroman 2-carboxylic acid precursors. These chroman-containing primary amines are useful building blocks for the synthesis of chroman-derived pharmaceutical agents.     

Synthesis and structural characterization of novel,fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties

The synthesis and structural characterization of a series of novel, fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties are described. The monomers, 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a – 2d ), were conveniently and efficiently synthesized from phenols and phthalic anhydride in two steps via 2‐(4′‐hydroxybenzoyl)benzoic acids, which were first obtained by the Friedel–Crafts reaction in good yields and with high stereoselectivity and were then converted into 2a – 2d by fusion with hydrazine. All the polymers were prepared by nucleophilic aromatic substitution (S_NAr) polycondensation between the compounds perfluorobiphenyl and 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a ‐ 2d ). The resulting fluorinated polymers were readily soluble in common organic solvents (e.g., CHCl₃, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, N‐methylpyrrolidone, etc.) at room temperature. Their weight‐average molecular weights and the polydispersities ranged from (7.96–18.25) × 10³ to 1.31–2.71, respectively. Their glass‐transition temperatures varied from 213 to 263 °C. They were all stable up to 390 °C both in air and in argon. The 5% weight‐loss temperatures of these polymers in air and argon ranged from 393–487 to 437–509 °C, respectively. Wide‐angle X‐ray diffraction studies indicated they were all amorphous and could be attributed to the presence of kink nonplanar moiety, phenyl phthalazinone along the polymer backbone. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 925–932, 2004     

匹配问题实例空间和解空间结构

本文通过研究匹配问题的实例空间，匈牙利算法和解空间三者之间的关系，指出S实例空间的数目与问题复杂度之间的关系既不是充分也不是必要的，而如何对问题的解空间进行合理的分解才能是问题的关键。     

Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

The reaction pattern of norbornene with excited state carbonyl compounds: Photochemical preparations of norbornene derivatives

We established that acetylacetone and acetone photolytically sensitize norbornene to undergo an efficient radical addition of solvent (ranging from hexane, cyclic ethers, haloalkanes, acetone, alcohols and acetonitrile) across the double bond. In view of its synthetic applicability, sensitized photoreactions of norbornene were reviewed and their mechanisms were compared. Photolysis of acetylacetone in the presence of norbornene in hexane induced i) acetylacetone to cycloadd to norbornene giving the expected 1,5-diketone, and ii) sensitization by triplet excited acetylacetone to generate reactive norbornene, which underwent dimerization as well as the addition of a solvent molecule by radical chain processes. In other solvents, the radical chain addition of solvent dominated the photoreaction, and superseded the cycloaddition, to give excellent to good yields of adducts to norbornene. While the excited species of acetylacetone for the sensitization was deduced to be its spectroscopic triplet excited state, that for the cycloaddition should involve a different one which may be a twisted triplet acetylacetone; sensitization experiments showed that the cycloaddition did not occur from the spectroscopic triplet state. Triplet excited acetone sensitized norbornene to undergo the same solvent addition more efficiently and cleanly than acetylacetone did. In view of various conflicts existing in the proposed energy transfer mechanism, the sensitized norbornene reactions were rationalized with electron transfer and a cation radical chain mechanism.     

The Assessment of Reservation Prices of an Intermediate R&D Result and Patent Reward Under Oligopolistic Competitive Behaviour

One of the shortcomings of R&D evaluation is a lack of emphasis on analytical assessment of the value of an on-going R&D project. This paper addresses the problem concerning the distributive aspect of access to superior knowledge. Decision tree analysis and probability models appear to be appropriate tools for assessing the values of an intermediate result and patent reward of a firm's R&D decision in an environment of perfect information and oligopolistic competition. The assessed values are used as minimum prices acceptable to the firm when the knowledge is disseminated to the public. This paper will attempt to resolve this problem through the determination of the appropriate values of the reservation price of the first-stage invention in terms of the final reward and of a patent reward for which the inventor is willing to apply.     

Efficient synthesis of an aldehyde‐capped polythiophene containing fluorinated electron‐withdrawing groups

To incorporate an acceptor type polythiophene segment onto a supramolecular block copolymer for potential light harvesting applications, effective synthetic routes for the end‐functionalized and acceptor‐substituted polythiophenes are critical. The Ullmann coupling reaction can be utilized to obtain electron‐deficient polythiophenes and to attach terminal thiophene units that carry functional groups. In this article, the reactions involving a 2,5‐dibromothiophene monomer containing an electron‐withdrawing fluorinated ester and 5‐bromo‐2‐thiophenecarboxaldehyde (the end‐capper) were studied in detail. It was found that the Ullmann coupling reaction of the dibromide is very fast (completed in a few minutes) and the terminal bromine group does not survive long under the reaction condition. These findings lead to the development of an effective procedure for aldehyde end‐capping of electron‐deficient polythiophenes. Polymers with molecular weights around 4000 Da are routinely obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 41–47, 2007