Production of porous suspension polymer beads with a narrow size distribution using a cross-flow membrane and a continuous tubular reactor

The work described focuses on a two-stage process for the production of large porous suspension polymer beads of defined particle size and narrow size distribution. Emulsification has been performed using purpose built cross-flow membrane equipment, which allows controlled production of large emulsion droplets with a much narrower size distribution. The work described compares the production of large emulsion droplets of monomer prepared both by agitation and using a cross-flow membrane. The effects of variations in the pore size of the membrane and flow-rates on the size of the emulsion droplets produced are also investigated. The second stage of the process is polymerisation of performed monomer emulsion droplets using a continuous tubular reactor. Samples polymerised using such a method show a narrower size distribution than similar systems polymerised as a batch.     

Free volume studies in miscible polymer blend systems

This paper summarises the currently available literature concerned with measurement of free volume in miscible, amorphous polymer blends using positron annihilation lifetime spectroscopy (PALS) which probes excluded volume at the angstrom level. Previously reported data is compared with new data from a range of different blend systems. Miscible blends tend to show a negative deviation of free volume size (and to a lesser degree free volume fraction) on mixing due to the intimacy of packing of the blend component macromolecules. A largely immiscible system is also reported and shows a different behaviour (positive deviation of free volume size) and this is ascribed to additional free volume at the interface.     

Production of porous suspension polymers using a continuous tubular reactor

The conventional method for the synthesis of porous cross-linked copolymer beads is by suspension polymerisation. Suspension polymerisation reactions are generally performed in a stirred tank, which generally results in a large size distribution. By careful control of the polymerisation conditions, polymer beads can be produced using a tubular poly(tetrafluoroethylene) continuous reactor. Such beads are produced with the same average pore size, but with a lower degree of polydispersity than analogous systems produced in a batch reactor (stirred tank). This is achieved by density-matching the droplet and continuous phases (by the use of a brominated monomer or a porogenic diluent) and increasing the viscosity of the monomer phase (with the addition of small amounts of polystyrene). Received: 26 June 1999/Accepted in revised form: 7 October 1999     

Use of capillary electrophoresis and fluorescent labeled peptides to detect the abnormal prion protein in the blood of animals that are infected with a transmissible spongiform encephalopathy.

Transmissible spongiform encephalopathies in humans and in animals are fatal neuro-degenerative diseases with long incubation times. The putative cause of these diseases is a normal host protein, the prion protein, that becomes altered. This abnormal prion protein is found mostly in the brains of infected individuals in later stages of the disease, but also can be found in lymphoid and other tissues in lower amounts. In order to eradicate this disease in animals, it is important to develop a system that can concentrate the abnormal prion protein and an assay that is very sensitive. The sensitivity that can be achieved with capillary electrophoresis makes it possible to detect the abnormal protein in blood. A peptide from the carboxyl terminal region, amino acid positions 218-232, was labeled with fluorescein during the synthesis of the peptide at the amino terminus. Antibodies that have been produced to this peptide were affinity purified and used in a capillary electrophoresis immunoassay. The amount of fluorescein labeled peptide in the capillary was 50 amol. Blood was obtained from normal sheep and elk, from sheep infected with scrapie and elk infected with chronic wasting disease. Buffy coats and plasma were prepared by a conventional method. After treatment with proteinase K, which destroys the normal protein but not the altered one, the blood fractions were extracted and tested in the capillary electrophoresis immunoassay for the abnormal prion protein. The abnormal prion protein was detected in fractions from blood from infected animals but not from normal animals. This assay makes a pre-clinical assay possible for these diseases and could be adapted to test for the abnormal prion protein in process materials that are used for manufacture of pharmaceuticals and products for human consumption.     

Light-perturbed hysteresis in an iron(II) spin-crossover compound observed by the Mössbauer effect

The compound [Fe(phy)₂](BF₄)₂ (phy = 1,10-phenanthroline-2-carbaldehyde phenylhydrazone) shows spin-transition with a hysteresis of 10 K width around room temperature. Continuous irradiation of the compound during heating and cooling with green light (514 nm) shifts the hysteresis in temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Epoxidation of bacterial polyesters with unsaturated side chains. II. Rate of epoxidation and polymer properties

Poly(3-hydroxyoctanoate-co-3-hydroxy-10-undecenoate)s (PHOUs) with controlled amounts of unsaturated repeating units were epoxidized to various extents with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. The epoxidation reaction was second order, with an initial rate constant of 1.1 × 10⁻³Lmol^−1.s⁻¹ at 20°C, regardless of the unsaturated unit content in PHOU. No substantial change in either molecular weight or molecular weight distribution occurred as a result of epoxidation, but the melt transition temperature and enthalpy of melting both decreased as the unsaturated groups were increasingly converted into epoxide groups. In contrast, the glass transition temperature (T_g) increased by approximately 0.25°C for each 1 mol % of epoxidation, irrespective of the composition of the PHOU. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2381–2387, 1998     

On the Origin of the Non-Arrhenius Na-ion Conductivity in Na3OBr

The sodium-rich antiperovskites (NaRAPs) with composition Na₃OB (B=Br, Cl, I, BH₄, etc.) are a family of materials that has recently attracted great interest for application as solid electrolytes in sodium metal batteries. Non-Arrhenius ionic conductivities have been reported for these materials, the origin of which is poorly understood. In this work, we combined temperature-resolved bulk and local characterisation methods to gain an insight into the origin of this unusual behaviour using Na₃OBr as a model system. We first excluded crystallographic disorder on the anion sites as the cause of the change in activation energy; then identified the presence of a poorly crystalline impurities, not detectable by XRD, and elucidated their effect on ionic conductivity. These findings improve understanding of the processing-structure-properties relationships pertaining to NaRAPs and highlight the need to determine these relationships in other materials systems, which will accelerate the development of high-performance solid electrolytes.