Quantitative analysis of 2-furfural and 5-methylfurfural in different Italian vinegars by headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry using isotope dilution

A new method was developed for the determination of 2-furfural (2-F) and 5-methylfurfural (5-MF), two products of Maillard reaction in vinegar, with head-space solid-phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). A divinylbenzene (DVB)/carboxen (CAR)/polydimethylsiloxane (PDMS) fibre was used and SPME conditions were optimised, studying ionic strength effect, temperature effect and adsorption time. Both analytes were determined by calibration established on 2-furfural-d4 (2-F-d4). The method showed good linearity in the range studied (from 16 to 0.12 mg/l), with a regression coefficient r2 of 0.9999. Inter-batch precision and accuracy were found between 14.9 and 6.0% and between -11.7 and 0.2%, respectively. Detection limit was 15 microg/l. The method is simple and accurate and it has been applied to a series of balsamic and non-balsamic vinegars.     

Small-angle neutron scattering of ionic perfluoropolyether micellar solutions: role of counterions and temperature

This paper reports a small-angle neutron scattering (SANS) characterization of perfluoropolyether (PFPE) aqueous micellar solutions with lithium, sodium, cesium and diethanol ammonium salts obtained from a chlorine terminated carboxylic acid and with two perfluoroisopropoxy units in the tail (n(2)). The counterion and temperature effects on the micelle formation and micellar growth extend our previous work on ammonium and potassium salts n(2) micellar solutions. Lithium, sodium, cesium and diethanol ammonium salts are studied at 0.1 and 0.2 M surfactant concentration in the temperature interval 28-67 degrees C. SANS spectra have been analyzed by a two-shell model for the micellar form factor and a screened Coulombic plus steric repulsion potential for the structure factor in the frame of the mean spherical approximation of a multicomponent system reduced to a generalized one component macroions system (GOCM). At 28 degrees C, for all the salts, the micelles are ellipsoidal with an axial ratio that increases from 1.6 to 4.2 as the counterion volume increases. The micellar core short axis is 13 A and the shell thickness 4.0 A for the alkali micelles, and 14 and 5.1 A for the diethanol ammonium micelles. Therefore, the core short axis mainly depends on the surfactant tail length and the shell thickness on the carboxylate polar head. The bulky diethanol ammonium counterion solely influences the shell thickness. Micellar charge and average aggregation number depend on concentration, temperature and counterion. At 28 degrees C, the fractional ionization decreases vs the counterion volume (or molecular weight) increase at constant concentration for both C = 0.1 M and C = 0.2 M. The increase of the counterion volume leads also to more ellipsoidal shapes. At C = 0.2 M, at 67 degrees C, for sodium and cesium micelles the axial ratio changes significantly, leading to spherical micelles with a core radius of 15 A, lower average aggregation number, and larger fractional ionization.     

Thermal analysis of a drug-polymeric excipient solid system

Differential scanning calorimetry has been applied to the study of the solid system cross-linked polyvinylpyrrolidone/trimethoprim.Different results have been systematically obtained on co-ground and not co-ground mixtures, suggesting some type of interaction to take place between components as a consequence of co-grinding.A simple phenomenological model of the interaction is proposed, which quite satisfactorily agrees with thermal data.

---

Zusammenfassung Das feste System von vernetztem Polyvinyl-pyrolidin/Trimethoprim wurde mittels DSC untersucht. Unterschiedliche Ergebnisse wurden systematisch für zusammen und nicht zusammen verriebene Mischungen gefunden, was auf eine Wechselwirkung zwischen Komponenten beim Verreiben hindeutet. Ein einfaches phänomenologisches Modell dieser Wechselwirkung wird vorgeschlagen, das mit thermischen Daten befriedigend übereinstimmt.

---

— . . , . , .

---

---

This work has been partially supported by Ministero Pubblica Istruzione (Fondi 60%).     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

On the reduction of NiO forms in magnesia supported catalysts

Reducibility of Ni/MgO catalysts has been studied by the temperature-programmed reduction (TPR) technique in the temperature range of 373–1273 K. The profile of reduction reveals the presence of various forms of NiO. The effects of nickel loading and treatment temperature on catalyst reducibility have been evaluated. The formation of NiO–MgO solid solution controls the whole reduction of Ni/MgO system.

---

Ni/MgO 373–1273 . NiO. . Ni/MgO NiO–MgO.

     

Low oxidation state ruthenium chemistry : IV. The reactions of M(CO)2(PPh3)3 complexes (M = Fe,Ru) and the hydrogenation and isomerization of alkenes catalyzed by RuL(CO)2(PPh3)2 (L = H2, PPh3)

The complexes M(CO)₂(PPh₃)₃ (I, M = Fe; II, M = Ru) readily react with H₂ at room temperature and atmospheric pressure to give cis-M(H)₂(CO)₂(PPh₃)₂ (III, M = Fe;IV,M = Ru). I reacts with O₂ to give an unstable compound in solution, in a type of reaction known to occur with II which leads to cis-Ru(O₂)(CO)₂(PPh₃)₂(V). Even compound IV reacts with O₂ to give V with displacement of H₂; this reaction has been shown to be reversible and this is the first case where the displacement of H₂ by O₂ and that of O₂ by H₂ at a metal center has been observed. III and IV are reduced to M(CO)₃(PPh₃)₂ by CO with displacement of H₂; Ru(CO)₃- (PPh₃)₂ is also formed by treatment of IV with CO₂, but under higher pressure. Compounds II and IV react with CH₂CHCN to give Ru(CH₂CHCN)(CO)₂- (PPh₃)₂(VI) which reacts with H₂ to reform the hydride IV.cis-Ru(H)₂(CO)₂(PPh₃)₂(IV) has been studied as catalyst in the hydrogenation and isomerization of a series of monoenes and dienes. The catalysts are poisoned by the presence of free triphenylphosphine. On the other hand the ready exchange of H₂ and O₂ on the “Ru(CO)₂(PPh₃)₂” moiety makes IV a catalyst not irreversibly poisoned by the presence of air. It has been found that even Ru(CO)₂(PPh₃)₃(II) acts as a catalyst for the isomerization of hex-1-ene at room temperature under an inert atmosphere.     

Cluster and periodic DFT calculations of MgO/Pd(CO) and MgO/Pd(CO)(2) surface complexes

The bonding and vibrational properties of Pd(CO) and Pd(CO)(2) complexes formed at the (100) surface of MgO have been investigated using the gradient-corrected DFT approach and have been compared to the results of infrared and thermal desorption experiments performed on ultrathin MgO films. Two complementary approaches have been used for the calculation of the electronic properties: the embedded cluster method using localized atomic orbital basis sets and supercell periodic calculations using plane waves. The results show that the two methods provide very similar answers, provided that sufficiently large supercells are used. Various regular and defect adsorption sites for the Pd(CO) and Pd(CO)(2) have been considered: terraces, steps, neutral and charged oxygen vacancies (F and F(+) centers), and divacancies. From the comparison of the computed and experimental results, it is concluded that the most likely site where the Pd atoms are stabilized and where carbonyl complexes are formed are the F(+) centers, paramagnetic defects consisting of a single electron trapped in an anion vacancy.