Selective synthesis of 2-substituted 4-carboxy oxazoles, thiazoles and thiazolidines from serine or cysteine amino acids

The synthesis of new 4-carboxy oxazoles, thiazoles and thiazolidines by condensation of serine or cysteine with aldehydes or acids is described. Due to the optimization of a mild and selective procedure, which takes advantage of the positive effect of microwave irradiation on the MnO₂ mediated oxidation step, the 2-substituted-4-carboxy derivatives can be obtained in multi-gram scale. Examples of coordination chemistry to Ni(II) and Co(II) are described.     

Photochromic,Thermochromic, and Fluorescent Spirooxazines and Naphthopyrans: A Spectrokinetic and Thermodynamic Study

The photochromic and thermochromic behavior of four commercially available Reversacol dyes are presented. The compounds studied belong to the class of spirooxazines and naphthopyrans, which are typically thermoreversible photochromic molecules. On stimulation with UV light, these compounds become colored and exhibit spectra which extend over the whole visible region. Increasing the temperature causes spontaneous coloration (thermochromism). Herein, absorption and fluorescence spectra, molar absorption coefficients of the colorless and colored forms, fluorescence and photochemical quantum yields, and kinetic parameters of thermal bleaching (rate constant, frequency factor, and activation energy) are determined in acetonitrile solution. The thermal ground‐state reaction is exhaustively described in terms of thermodynamic parameters (equilibrium constant, free energy, enthalpy, and entropy). Temperature effects on photochemical and thermal colorabilities are evaluated. The results indicate that the two spirooxazines are good photochromes below room temperature, whereas they are efficient thermochromic compounds above room temperature. Naphthopyrans are better photochromes but worse thermochromic compounds than spirooxazines.     

Effects of the exciting wavelength and viscosity on the photobehavior of 9- and 9,10-bromoanthracenes

The widely investigated photobehaviors of 9-bromo and 9,10-di-bromoanthracenes have been revisited here to clarify the competition among different relaxation paths of their lowest two electronic excited states. The results obtained show that these two molecules exhibit a parallel photobehavior, which depends on the excited electronic and vibronic transition, the medium viscosity, and the temperature. The first electronic state of either of these does not exhibit photochemistry in fluid solution or rigid matrices (80 K). The fluorescence emission occurs with a very low quantum yield (approximately 10(-2)) at room temperature but with a very high quantum yield (0.9 to approximately 1) at 80 K. When exciting in the second electronic transition, the fluorescence intensity is lower than when exciting in S1 at both room temperature and low temperature due to competition with the observed photocleavage of the C-Br bond. The reaction yield decreases as the temperature decreases and depends on the viscosity of the solvent; the higher the viscosity, the lower the observed yield of photochemistry. Temperature and viscosity effects are a consequence of the fact that the radicals produced by C-Br bond breakage cannot escape from the solvent cage and, moreover, quickly recombine within the cage giving the appearance that no photochemistry occurred. The presence of photochemistry in S(2) and its absence in S(1) is principally due to the fact that S(2) has a pi,sigma* character in the C-Br bond, whereas the S(1) state has its origin from a pi,pi* delocalized configuration.     

Fundamental Methods for the Phase Transfer of Nanoparticles

The utilization of nanoparticles for a variety of applications has raised much interest in recent years as new knowledge has emerged in nanochemistry. New and diverse methods for synthesis, characterization, and application of these particles have been discovered with differing degrees of ease and reproducibility. Post-synthetic modification of nanoparticles is often a required step to facilitate their use in applications. The reaction conditions and chemical environment for the nanoparticle synthesis may not support or may conflict with further reactions. For this reason, it is beneficial to have phase transfer methods for nanoparticles to allow for their dispersion in a variety of solvents. Phase transfer methods are often limited in the types and sizes of particles that can be effectively dispersed in an immiscible solvent. Currently, general transfer methods for a wide variety of nanoparticles have not been identified. New routes for phase transfer allow for utilization of a larger range of particles in applications which were previously limited by solubility and reactivity issues. In this work, we will describe the fundamental methods for the phase transfer of metallic nanoparticles. We will look at the major problems and pitfalls of these methods. The applications of phase transfer will also be reviewed, mainly focusing on catalysis and drug delivery.     

Cyclopentadienyl Ruthenium(II) Complexes with Bridging Alkynylphosphine Ligands: Synthesis and Electrochemical Studies

The reaction of [CpRuCl(PPh₃)₂] (Cp=cyclopentadienyl) and [CpRuCl(dppe)] (dppe=Ph₂PCH₂CH₂PPh₂) with bis‐ and tris‐phosphine ligands 1,4‐(Ph₂PC≡C)₂C₆H₄ ( 1 ) and 1,3,5‐(Ph₂PC≡C)₃C₆H₃ ( 2 ), prepared by Ni‐catalysed cross‐coupling reactions between terminal alkynes and diphenylchlorophosphine, has been investigated. Using metal‐directed self‐assembly methodologies, two linear bimetallic complexes, [{CpRuCl(PPh₃)}₂(μ‐dppab)] ( 3 ) and [{CpRu(dppe)}₂(μ‐dppab)](PF₆)₂ ( 4 ), and the mononuclear complex [CpRuCl(PPh₃)(η¹‐dppab)] ( 6 ), which contains a “dangling arm” ligand, were prepared (dppab=1,4‐bis[(diphenylphosphino)ethynyl]benzene). Moreover, by using the triphosphine 1,3,5‐tris[(diphenylphosphino)ethynyl]benzene (tppab), the trimetallic [{CpRuCl(PPh₃)}₃(μ₃‐tppab)] ( 5 ) species was synthesised, which is the first example of a chiral‐at‐ruthenium complex containing three different stereogenic centres. Besides these open‐chain complexes, the neutral cyclic species [{CpRuCl(μ‐dppab)}₂] ( 7 ) was also obtained under different experimental conditions. The coordination chemistry of such systems towards supramolecular assemblies was tested by reaction of the bimetallic precursor 3 with additional equivalents of ligand 2 . Two rigid macrocycles based on cis coordination of dppab to [CpRu(PPh₃)] were obtained, that is, the dinuclear complex [{CpRu(PPh₃)(μ‐dppab)}₂](PF₆)₂ ( 8 ) and the tetranuclear square [{CpRu(PPh₃)(μ‐dppab)}₄](PF₆)₄ ( 9 ). The solid‐state structures of 7 and 8 have been determined by X‐ray diffraction analysis and show a different arrangement of the two parallel dppab ligands. All compounds were characterised by various methods including ESIMS, electrochemistry and by X‐band ESR spectroscopy in the case of the electrogenerated paramagnetic species.     

Photoinduced processes in dipyrrolyl-perfluoro-cyclopentenes

The photobehavior of five photochromic dipyrrolyl-perfluoro-cyclopentenes was studied by steady state and time-resolved absorption spectroscopy. The quantum yields of the UV-photoinduced ring-closing reaction (coloration) and the visible-stimulated cycloreversion reaction (bleaching) were measured. Kinetic and thermodynamic parameters of thermal bleaching were also determined. Nanosecond time-resolved experiments showed formation of a transient, which was not a precursor of the reaction photoproduct. This transient was tentatively assigned to a radical cation formed by direct photoionization through a short-lived triplet state. The nature of the transient species was supported by photoinduced electron transfer to electron acceptors.     

Synthesis and Spectroscopic Characterization of Thienopyrazine-Based Fluorophores for Application in Luminescent Solar Concentrators (LSCs)

Organic fluorophores have found broad application as emitters in luminescent solar concentrators (LSCs) for silicon photovoltaics. In particular, the preparation of organic conjugated systems with intense light-harvesting ability, emissions in the deep-red and NIR regions, and large Stokes shift values represent a very challenging undertaking. Here, we report a simple and easy way to prepare three symmetrical donor–acceptor–donor (DAD) organic-emitting materials based on a thienopyrazine core. The central core in the three dyes was modified with the introduction of aromatic substituents, aiming to affect their optical properties. The fluorophores were characterized by spectroscopic studies. In all cases, visible-NIR emissions with large Stokes shifts were found, highlighting these molecules as promising materials for the application in LSCs.     

Production of antitumoral retamycin during fed-batch fermentations of Streptomyces olindensis

Fed-batch runs were performed in order to correlate the production of retamycin, an anthracycline antibiotic produced by Streptomyces olindensis in submerged cultures, with the specific growth rate. Maximum retamycin production was achieved with an exponential feed rate, controlling the specific growth rate at a low value (0.03h⁻¹, about 10% of the maximum specific growth rate). Control of the specific growth rate at higher values (0.10 and 0.17 h⁻¹) caused a decrease in antibiotic production. Morphology, assessed by image analysis, was shown to be highly relevant in this process. Cell growth mainly in the form of clumps (90% clumps and 10% free filaments) led to better results than growth as clumps (75%) and free filaments (25%).     

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.