Microwave activation of the electro-oxidation of glucose in alkaline media

The oxidation of glucose is a complex process usually requiring catalytically active electrode surfaces or enzyme-modified electrodes. In this study the effect of high intensity microwave radiation on the oxidation of glucose in alkaline solution at Au, Cu, and Ni electrodes is reported. Calibration experiments with the Fe(CN)(6)(3-/4-) redox system in aqueous 0.1 M NaOH indicate that strong thermal effects occur at both 50 and 500 microm diameter electrodes with temperatures reaching 380 K. Extreme mass transport effects with mass transport coefficients of k(mt) > 0.01 m s(-1)(or k(mt) > 1.0 cm s(-1)) are observed at 50 microm diameter electrodes in the presence of microwaves. The electrocatalytic oxidation of glucose at 500 microm diameter Au, Cu, or Ni electrodes immersed in 0.1 M NaOH and in the presence of microwave radiation is shown to be dominated by kinetic control. The magnitude of glucose oxidation currents at Cu electrodes is shown to depend on the thickness of a pre-formed oxide layer. At 50 microm diameter Au, Cu, or Ni electrodes microwave enhanced current densities are generally higher, but only at Au electrodes is a significantly increased rate for the electrocatalytic oxidation of glucose to gluconolactone observed. This rate enhancement appears to be independent of temperature but microwave intensity dependent, and therefore non-thermal in nature. Voltammetric currents observed at Ni electrodes in the presence of microwaves show the best correlation with glucose concentration and are therefore analytically most useful.     

Reactions catalyzed by soda lime glass. III. Molecular weights of poly(methyl methacrylate) prepared in aqueous media with NaHSO3 as initiator

The polymerization of methyl methacrylate (MMA) was carried out in water by use of various concentrations of sodium bisulfite as initiator in the presence and absence of colorless and colored soda lime glass at 40°C. The reaction products were filtered, washed with water, methanol and finally dried at 50°C. The glass–polymer combination was subjected to Soxhlet extraction with benzene. The molecular weights of the soluble polymers were determined viscometrically. In the absence of glass, the conversion was lower but the average molecular weights were higher than in presence of soda lime glass. The effect of grain size of the glass on conversion and molecular weights was such that larger grain size of glass resulted in lower conversion and higher average molecular weights.     

Radiation effects on polymers—VI. Enhancement of radiation vulcanization of styrene-butadiene rubbers mixes using two-component sensitizers

Different combinations of various multifunctional monomers and halogen co-agents were used to sensitize the radiation vulcanization of styrene-butadiene rubber (SBR). It was found that combinations of various vinyl compounds with hexachloroethane give rise to vulcanizates with considerably better physico-mechanical properties than those obtained in the presence of one of the two components. The enhancement of vulcanization depends upon the type of the vinyl co-agent used and on the concentrations of the sensitizers. The dose required to achieve vulcanizates with satisfactory physico-mechanical properties was reduced to 3–5 Mrad. Infra-red spectrophotometric analysis, supported by swelling and solubility tests, indicated that the co-agent most probably became a part of the vulcanized rubber. The mechanism of vulcanization in the presence of the two-component co-agent system is suggested.     

Microwave-enhanced electro-deposition and stripping of palladium at boron-doped diamond electrodes

In situ microwave activation has been applied to the electro-deposition and stripping of palladium metal (which is widely used as a catalyst) at cavitation resistant boron-doped diamond electrodes. Focused microwave radiation leading to heating, boiling, and cavitation is explored as an option to improve the speed and sensitivity of the analytical detection procedure. The deposition and anodic stripping of palladium by linear sweep voltammetry in 0.1 M KCl (pH 2) solution and at boron-doped diamond electrodes is shown to be strongly enhanced by microwave activation due to both (i) the increase in mass transport and (ii) the increase in the kinetic rate of deposition and stripping.The temperature at the electrode surface is calibrated with the reversible redox couple Fe(CN)₆⁴⁻/Fe(CN)₆³⁻ and found to be reach 380 K. In the presence of microwave radiation, the potential of onset of the deposition of palladium is strongly shifted positive from −0.4 to +0.1 V versus SCE. The optimum potential for deposition in the presence of microwaves is −0.4 V versus SCE and the anodic stripping peak current is shown to increase linearly with deposition time. Under these conditions, the stripping peak current varies linearly with the palladium concentration down to ca. 2 μM. At concentration lower than this a logarithmic variation of the stripping peak current with concentration is observed down to ca. 0.1 μM (for 5 min pre-concentration in presence of microwave radiation).     

Microwave-enhanced electrochemical processes in micellar surfactant media

High intensity microwave radiation effects are demonstrated for electron transfer processes at 25 or 50-μm diameter platinum electrodes immersed in micellar sodium dodecylsulfate (SDS) solutions. First, a solution containing 2 mM Fe(CN)₆³⁻ and 2 mM Fe(CN)₆⁴⁻ in aqueous 0.1 M NaCl with and without SDS is employed to calibrate the electrode temperature and mass transport conditions. Addition of 0.1 M SDS has only a small effect on the microwave enhanced voltammetry for the Fe(CN)₆^3-/4− system. Next, two highly water-insoluble redox systems are studied. A solution of 1 mM tert-butylferrocene in aqueous 0.1 M NaCl containing 0.1 M SDS is shown to give no current response in the absence of microwaves. In the presence of focused microwaves at a platinum disc electrode, a strong current for the one electron oxidation of tert-butylferrocene is detected presumably due to localized disruption of the micellar solution. Concentrations of tert-butylferrocene down to the micromolar level are detected. α-Tocopherol, a lipophilic vitamin and antioxidant, is soluble in aqueous 0.1 M SDS/0.1 M NaCl. In the presence of microwave radiation, a strong and concentration dependent anodic current response consistent with the two-electron oxidation of α-tocopherol is observed. A heptode array of seven individual 50 μm diameter platinum microelectrodes placed in ca. 720 μm distance of each other is shown to allow microwave enhanced currents to be increased sevenfold with each electrode exhibiting the same microwave effect.     

Organotin polymers—III: Copolymerization and terpolymerization of tributyltin acrylate with methyl methacrylate,propyl methacrylate,butyl methacrylate and acrylonitrile

Copolymerizations of tri-n-butyltin acrylate (M₁) with (a) methyl methacrylate (M₂), (b) propyl methacrylate (M₃), (c) butyl methacrylate (M₄) and (d) acrylonitrile (M₅) in solution at 70 using AIBN as initiator led to monomer reactivity ratios as follows: (a) r₁ = 0.401 and r₂ = 2.199, (b) 0.323 and 1.713, (c) 0.196 and 1.65, and (d) 0.243 and 1.008. The variation of the average copolymer composition with conversion for two copolymers from M₁ with M₂ and M₄ were calculated and verified experimentally. Four terpolymer compositions involving M₁ and M₅ with M₂ or M₄ were prepared and the terpolymer compositions were calculated on the basis of tin and nitrogen analyses. The variations of instantaneous and average terpolymer composition with conversion fit satisfactorily the experimental results over a wide range of conversion.     

Microwave enhanced electroanalysis of formulations: processes in micellar media at glassy carbon and at platinum electrodes

The direct electroanalysis of complex formulations containing alpha-tocopherol (vitamin E) is possible in micellar solution and employing microwave-enhanced voltammetry. In the presence of microwave radiation substantial heating and current enhancement effects have been observed at 330 microm diameter glassy carbon electrodes placed into a micellar aqueous solution and both hydrophilic and highly hydrophobic redox systems are detected. For the water soluble Fe(CN)(6)(3-/4-) redox system in micellar aqueous solutions of 0.1 M NaCl and 0.1 M sodium dodecylsulfate (SDS) at low to intermediate microwave power, thermal effects and convection effects are observed. At higher microwave power, thermal cavitation is induced and dominates the mass transport at the electrode surface. For the micelle-soluble redox systems tert-butylferrocene and 2,5-di-tert-butyl-1,4-benzoquinone, strong and concentration dependent current responses are observed only in the presence of microwave radiation. For the oxidation of micelle-soluble alpha-tocopherol current responses at glassy carbon electrodes are affected by adsorption and desorption processes whereas at platinum electrodes, analytical limiting currents are obtained over a wide range of alpha-tocopherol concentrations. However, for the determination of alpha-tocopherol in a commercial formulation interference from proteins is observed at platinum electrodes and direct measurements are possible only over a limited concentration range and at glassy carbon electrodes.     

Gas permeation parameters and other physicochemical properties of a polymer of intrinsic microporosity: Polybenzodioxane PIM-1

A detailed study of gas permeation, thermodynamic properties and free volume was performed for a novel polymer of intrinsic microporosity (PIM-1). Gas permeability was measured using both gas chromatographic and barometric methods. Sorption of vapors was studied by means of inverse gas chromatography (IGC). In addition, positron annihilation lifetime spectroscopy (PALS) was employed for investigation of free volume in this polymer. An unusual property of PIM-1 is a very strong sensitivity of gas permeability and free volume to the film casting protocol. Contact with water in the process of film preparation resulted in relatively low gas permeability (P(O₂) = 120 Barrer), while soaking with methanol led to a strong increase in gas permeability (P(O₂) = 1600 Barrer) with virtually no evidence of fast aging (decrease in permeability) that is typical for highly permeable polymers. For various gas pairs (O₂/N₂, CO₂/CH₄, CO₂/N₂) the data points on the Robeson diagrams are located above the upper bound lines. Hence, a very attractive combination of permeability and selectivity is observed. IGC indicated that this polymer is distinguished by the largest solubility coefficients among all the polymers so far studied. Free volume of PIM-1 includes relatively large microcavities (R = 5 Å), and the results of the PALS and IGC methods are in reasonable agreement.     

Effect of pH and α-, β- and γ-cyclodextrin on the spectral properties of etoricoxib: spectroscopic and molecular dynamics study

The spectral properties of etoricoxib (ETR) at pH 2.0, 6.0 and 10.0 in the presence of cyclodextrins (CDs) were investigated. The absorption spectrum of ETR in acidic medium exhibited two bands centered at 236 and 273 nm, while in basic medium it exhibited two bands centered at 236 and 285 nm. No change in the spectrum was observed in the presence of CDs. The fluorescence emission spectra of ETR in acidic and basic media exhibited one band at 380 nm and another one at 484 nm. The emission band at 484 nm was enhanced when ETR was complexed with β-CD and γ-CD at pH 2.0, 6.0 and 10.0, while the band at 380 nm was enhanced selectively when ETR was complexed with α-CD at pH 2.0. Molecular dynamics simulations computations revealed that at pH 2.0, the sulfonyl moiety of H₂ETR²⁺ is preferentially included within the α-CD cavity, which is believed to cause the enhancement of the band at 380 nm. Moreover, at pH 6.0 and 10.0, the enhancement of the band at 484 nm was related to the inclusion of the chloropyridinyl and methylpyridinyl groups of the bipyridine moiety of HETR⁺ and ETR within β-CD and γ-CD cavities. Benesi–Hildebrand analysis showed that the ETR/β-CD complex adopts a 1:1 stoichiometry with association constant of K ₁₁?=?64.8 at pH 2.0, K ₁₁?=?105.4 at pH 6.0 and K ₁₁?=?520.5 at pH 10.0.     

Separation of Isomers on Nematic Liquid Crystal Stationary Phases in Gas Chromatography: A Review

Understanding the composition of complex hydrocarbon mixtures is important for environmental studies in diverse fields, but many prevalent compounds cannot be confidently identified using traditional gas chromatography (GC) techniques. Increasing requirements on analyses of isomeric compounds and the problems encountered in their separation demand a study of more efficient systems which exhibit a high selectivity. Kelker and Fresenius first used nematic liquid crystals as stereospecific stationary phases in GC. Nematic liquid crystal has shown this particular selectivity and sensitivity as stationary phases for the separation of isomers having similar volatilities. Because of their unique selectivity towards rigid solute isomers, liquid crystal stationary phases were considered at one time to be a very promising class of materials that give gas chromatographic separations very different from those that can be obtained with any other stationary phase. Since then, a great deal of attention has been paid to the separation properties of this relatively wide group of substances. Liquid crystal can be used to separate a variety of compounds including isomer mixtures which cannot be separated on conventional stationary phases. This paper aims to review all specific experimental results and presents a comparative analytical study of monomeric nematic liquid crystal stationary phases used in GC. A further contribution of this review is in the field of isomeric compounds separation.