Modelling and Optimization of Stability Constants of Cadmium or Zinc with Biological Buffers (DIPSO or TAPS) in Aqueous Solutions by Electrochemical Techniques

The complexation behavior of four systems involving cadmium(II) or zinc(II) in aqueous solutions with the biological buffers 3-[N,N-bis(2-hydroxyethyl)amino]-2-hydroxypropanesulfonic acid (DIPSO), and [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS) was studied by direct current polarography (DCP) and glass electrode potentiometry (GEP), at 25.0 ± 0.1 °C and ionic strength 0.1 mol·dm^?3 KNO₃. Except for the Cd–TAPS system, for which full characterization of the system was possible either by DCP or GEP, full characterization of the other metal-buffer systems (Zn–DIPSO, Zn–TAPS and Cd–DIPSO) was only possible using DCP. For Zn-buffers systems, ZnL⁺ and $ {\text{ZnL(OH)}}_{2}^{ - } $ ZnL(OH) 2 ? (where L stands for buffer) were identified. For the Zn–DIPSO system, the overall stability constant values (as log₁₀ β) are 2.1 ± 0.2 and 13.4 ± 0.2, respectively. For the Zn–TAPS system, the overall stability constants values (as log₁₀ β) are 2.4 ± 0.1 and 12.9 ± 0.3, respectively. For the Cd–DIPSO system, the overall stability constants values (as log₁₀ β) of CdL⁺ and CdL(OH) are 2.9 ± 0.1 and 6.9 ± 0.3, respectively. For the Cd–TAPS system, only the species CdL⁺ was identified with log₁₀ β = 2.5 ± 0.1.     

On-line species-unspecific isotope dilution analysis in the picomolar range reveals the time- and species-depending mercury uptake in human astrocytes

In order to reveal the time-depending mercury species uptake by human astrocytes, a novel approach for total mercury analysis is presented, which uses an accelerated sample introduction system combined on-line with an inductively coupled plasma mass spectrometer equipped with a collision/reaction cell. Human astrocyte samples were incubated with inorganic mercury (HgCl₂), methylmercury chloride (MeHgCl), and thimerosal. After 1-h incubation with Hg²⁺, cellular concentrations of 3 μM were obtained, whereas for organic species, concentrations of 14–18 μM could be found. After 24 h, a cellular accumulation factor of 0.3 was observed for the cells incubated with Hg²⁺, whereas the organic species both showed values of about 5. Due to the obtained steady-state signals, reliable results with relative standard deviations of well below 5 % and limits of detection in the concentration range of 1 ng L^?1 were obtained using external calibration and species-unspecific isotope dilution analysis approaches. The results were further validated using atomic fluorescence spectrometry.

Synthesis and characterisation of cobalt(III) complexes with 1,1-dimethylethylenediamine (1,1-dmen) and 1,2-propanediamine (pn)

Two stable diamine complexes [Co(1,1-dmen)₂(NCS)₂]SCN · (H₂O)_1.5 (1) and [Co(pn)₂(NCS)₂]SCN · (H₂O)_1.5 (2) have been synthesised and characterised by elemental analysis, i.r. and electronic spectra and t.g.a. The structure of (1) has been confirmed by single-crystal X-ray diffraction and reveals that the cobalt complex has octahedral geometry and consists of two crystallographically independent cations, both situated on centres of inversion. In the crystal structure of (1), free H₂O molecules and SCN^– ions form an extensive hydrogen bonding network with the cation. It is an ordered pseudo-polymorph of a previous structure determination. Both (1) and (2) are diamagnetic.     

New 13-vertex metallacarborane sandwich compounds; synthetic and structural studies

Reduction of 1,12-closo-C2B10H12 followed by reaction with the appropriate metal halide and metathesis with either [K(18-crown-6)]Br or [BTMA]Cl ([BTMA] = [C6H5CH2N(CH3)3]+) affords isolable salts of the supraicosahedral metallacarborane sandwich anions [4,4-M-(1,10-closo-C2B10H12)2]n- in moderate to good yield. Compounds prepared are [BTMA][4,4-Co-(1,10-closo-C2B10H12)2] ( 1), [K(18-crown-6)][4,4-Co-(1,10-closo-C2B10H12)2] ( 2), [K(18-crown-6)]2[4,4-Ni-(1,10-closo-C2B10H12)2] ( 3), [K(18-crown-6)]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 4), [BTMA]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 5) and [K(18-crown-6)]2[4,4-Ti-(1,10-closo-C2B10H12)2] ( 6). Oxidation of the iron(II) species 4 and 5 with FeCl3 in THF generates the iron(III) analogues [K(18-crown-6)][4,4-Fe-(1,10-closo-C2B10H12)2] ( 7) and [BTMA][4,4-Fe-(1,10-closo-C2B10H12)2] ( 8), respectively. All diamagnetic compounds were characterised spectroscopically and the structures of 1, 3, 4, 6, 7 and 8 were established by single crystal X-ray diffraction. All anions have the anticipated cluster structures with two docosahedral 13-vertex cages joined at the central metal atom (the common degree-six vertex 4). Carbon atoms occupy the degree-four vertex 1 and the degree-five vertex 10. 11B NMR spectroscopy suggests the anions have, on the NMR timescale, C2h symmetry in solution at room temperature, consistent with free rotation, or at least substantial libration, of cage units about the long molecular axis. In the solid state the relative conformations of the two cages may be rationalised by simple bonding arguments, the single exception being the conformation of 4, in which both cages are subject to directional B-H...K+ interactions to the [K(18-crown-6)]+ counterion. The salts 3, 6 and 7 also show B-H...K+ interactions but involving one cage only.     

Enhancing Light Absorption and Charge Transfer Efficiency in Carbon Dots through Graphitization and Core Nitrogen Doping

Single-source precursor syntheses have been devised for the preparation of structurally similar graphitic carbon dots (CDs), with (g-N-CD) and without (g-CD) core nitrogen doping for artificial photosynthesis. An order of magnitude improvement has been realized in the rate of solar (AM1.5G) H₂ evolution using g-N-CD (7950 μmol_H2 (g_CD)⁻¹ h⁻¹) compared to undoped CDs. All graphitized CDs show significantly enhanced light absorption compared to amorphous CDs (a-CD) yet undoped g-CD display limited photosensitizer ability due to low extraction of photogenerated charges. Transient absorption spectroscopy showed that nitrogen doping in g-N-CD increases the efficiency of hole scavenging by the electron donor and thereby significantly extends the lifetime of the photogenerated electrons. Thus, nitrogen doping allows the high absorption coefficient of graphitic CDs to be translated into high charge extraction for efficient photocatalysis.     

In vitro characterization of an electroactive carbon-nanotube-based nanofiber scaffold for tissue engineering

In an effort to reduce organ replacement and enhance tissue repair, there has been a tremendous effort to create biomechanically optimized scaffolds for tissue engineering applications. In contrast, the development and characterization of electroactive scaffolds has attracted little attention. Consequently, the creation and characterization of a carbon nanotube based poly(lactic acid) nanofiber scaffold is described herein. After 28 d in physiological solution at 37 °C, a change in the mass, chemical properties and polymer morphology is seen, while the mechanical properties and physical integrity are unaltered. No adverse cytotoxic affects are seen when mesenchymal stem cells are cultured in the presence of the scaffold. Taken together, these data auger well for electroactive tissue engineering.

     

Applied biological and physicochemical activity of isoquinoline alkaloids: oxoisoaporphine and boldine

The aim of this study was to determine the electronic influence of substituent groups and annelated rings such as oxazole-oxazinone on the physicochemical and photoprotection, antioxidant capacity, toxicity and singlet oxygen photosensitization biological properties of isoquinoline alkaloid frameworks. Thus, oxoisoaporphine derivatives 1-5 and 3-azaoxoisoaporphine (6), some of them with phenolic structures, did not present any antioxidant capacity, possibly either by formation of keto-enol tautomerism species or the formation of unstable free radicals. Due to the singlet oxygen quantum yields (F_D) near to unity, and greater photostability than phenalenone, oxoisoaporphines 4-6 may be considered as photosensitizers for singlet oxygen production and can be used as new universal study tools. The biological application as antibacterial agents is an important and possible tool in the study of compounds with low cytotoxicity and high reactivity in antineoplastic chemotherapy. On the other hand, when boldine and its annelated derivatives B1-4 are irradiated, a photoprotector effect is observed (SPF = 2.35), even after 30 minutes of irradiation. They also act as photoprotectors in cell fibroblast cultures. No hemolysis was detected for boldine hydrochloride and its salts without irradiation. In solutions irradiated before incubation (at concentrations over 200 ppm) photoproducts were toxic to the nauplii of Artemia salina.     

Untethered 4,1,2-MC(2)B(10) supraicosahedral metallacarboranes, their C,C'-dimethyl 4,1,6-, 4,1,8- and 4,1,12-MC(2)B(10) analogues, and DFT study of the (4,)1,2- to (4,)1,6-isomerisations of C(2)B(11) carboranes and MC(2)B(10) metallacarboranes

Reduction of the tethered carborane 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) followed by metallation with {CpCo} or {(p-cymene)Ru} fragments affords both C,C'-dimethyl 4,1,2-MC(2)B(10) and 4,1,6-MC(2)B(10) species. DFT calculations indicate that the barriers to isomerisation of both 4-Cp-4,1,2-closo-CoC(2)B(10)H(12) and 4-(η-C(6)H(6))-4,1,2-closo-RuC(2)B(10)H(12) to their respective 4,1,6-isomers are too high for this to be the origin of the unexpected formation of 4,1,6-MC(2)B(10) products (in marked contrast to the related isomerisation of 1,2-closo-C(2)B(11)H(13) to 1,6-closo-C(2)B(11)H(13)), and, indeed, the 4,1,2-species are recovered unchanged from refluxing toluene. Equally, the DFT-calculated profile for the isomerisation of [7,8-nido-C(2)B(10)H(12)](2-) to [7,9-nido-C(2)B(10)H(12)](2-) suggests that the unexpected formation of 4,1,6-metallacarboranes is unlikely to result from isomerisation of a reduced (nido) carborane following desilylation. Instead, the source of the 4,1,6-MC(2)B(10) compounds is traced to desilylation of 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) by Li or Na prior to reduction. The supraicosahedral metallacarboranes 1,8-Me(2)-4-Cp-4,1,8-closo-CoC(2)B(10)H(10), 1,12-Me(2)-4-Cp-4,1,12-closo-CoC(2)B(10)H(10) and 1,12-Me(2)-4-(p-cymene)-4,1,12-closo-RuC(2)B(10)H(10) are also reported with all new species characterised both spectroscopically and crystallographically.     

An unprecedented Cu–Schiff base complex existing as two different trinuclear units with strong antiferromagnetic couplings

A new tetradentate N₂O₂ donor Schiff base ligand [OHC₆H₄CHNCH₂CH₂CH(CH₂CH₃)NCHC₆H₄OH = H₂L ] was obtained by 1:2 condensation of 1,3-diaminopentane with salicylaldehyde and has been used to synthesise an unusual copper(II) complex whose asymmetric unit presents two structurally different almost linear trinuclear units [Cu₃(μ-L)₂(ClO₄)₂] [Cu₃(μ-L)₂(H₂O)(ClO₄)₂] (1). The ligand and the complex were characterised by elemental analysis, FT-IR, ¹H NMR and UV–Vis spectroscopy in addition electrochemical and single crystal X-ray diffraction studies were performed for the complex. The magnetic properties of 1 reveal the presence of strong intra-trimer (J₁ = −202(3) cm⁻¹ and J₂ = −233(3) cm⁻¹) as well as very weak inter-trimer (zJ′ = −0.11(1) cm⁻¹) antiferromagnetic interactions.