Hybrid Plasmonic–Aerogel Materials as Optical Superheaters with Engineered Resonances

Solar radiation is a versatile source of energy, convertible to different forms of power. A direct path to exploit it is the generation of heat, for applications including passive building heating, but it can also drive secondary energy-conversion steps. We present a novel concept for a hybrid material which is both strongly photo-absorbing and with superior characteristics for the insulation of heat. The combination of that two properties is rather unique, and make this material an optical superheater. To realize such a material, we are combining plasmonic nanoheaters with alumina aerogel. The aerogel has the double function of providing structural support for plasmonic nanocrystals, which serve as nanoheaters, and reducing the diffusion rate of the heat generated by them, resulting in large local temperature increases under a relatively low radiation intensity. This work includes theoretical discussion on the physical mechanisms impacting the system's balanced thermal equilibrium.     

Electrostatic interaction between two conducting spheres

In the paper we consider the problem of the electrostatic interaction between two charged conducting spheres with arbitrary electrical charges and radiuses. Using the image charges method we determine exact analytical formulas for the force F and for the potential energy W of the interaction between these two spheres as well as for the potential V of the electromagnetic field in an arbitrary point created by them. Our formulas lead to Coulomb’s law for point charges.We theoretically prove the experimentally shown fact that two spheres with the same type (positive or negative) of charges can also attract each other.     

Another odd thing about unparticle physics

The peculiar propagator of scale invariant unparticles has phases that produce unusual patterns of interference with Standard Model processes. We illustrate some of these effects in e⁺e⁻→μ⁺μ⁻$e^{+}{e}^{-}\to {\mu }^{+}{\mu }^{-}$.     

Synthesis of β-Ketoiminato Copper(II) Complexes and Their Use in Copper Deposition

The template synthesis of ethylenediamine ( 1 ) with 2-acetylcyclopentanone ( 2 ) and [Cu(OAc)₂ · H₂O] ( 5 ) produced [Cu(1-(2-cC₅H₆(O))C(Me)NCH₂)₂)] ( 6 ) in 82 % yield. Reaction of 5 with bis(benzoylacetone)diethylenetriamine ( 7 , = L H)^[1] gave [Cu(μ-OAc)( L )(H₂O)]₂ ( 8 ). The solid-state structures of 6 and 8 were determined confirming that 8 possesses intra- and intermolecular hydrogen bonds resulting in a dimer formation. The thermal behavior of 6 – 8 was studied by TG and TG-MS. Under oxygen CuO was formed, whereas under Ar Cu/Cu₂O ( 6 ) or Cu ( 8 ) was obtained. Complex 6 was used as CVD precursor for Cu and Cu-oxide deposition (substrate temp., 400–500 °C, N₂, 60 mL · min^–1; O₂, 60 mL · min^–1; pressure, 0.87–1.5 mbar). The as-obtained deposits show separated particles of different appearance at the substrate surface as evidenced by SEM. Non-volatile 8 was applied as spin-coating precursor for Cu and CuO formation [conc. 0.25 mol · L^–1; volume 0.2 mL; 3000 rpm; depos. time 2 min; heating rate 50 K · min^–1; holding time 60 min (Ar), 120 min (air) at 800 °C]. The samples on silicon consist of granulated particles (Ar) or are non-dense with a grainy topography (air). EDX and XPS measurements confirmed the formation of Cu (Ar) or CuO (O₂) with up to 13 mol-% C impurity.     

A study of fused silica micro/nano patterning by focused-ion-beam

A dual-beam scanning electron microscopy (SEM)/focused-ion-beam (FIB) system was used to pattern fused silica substrates coated with a 15 nm thin Cr layer. The dimensions of fabricated features together with their surface morphology and profiles were investigated by SEM and atomic force microscopy (AFM). The study demonstrated that with the increase of the ion beam fluence the sputtering rate of the fused silica decreased non-linearly. Also, it was found that initially the sputtering rate increased with the increase of the beam current, after reaching a maximum value, it started decreasing when further beam current increment was performed. Compared with unprocessed areas, the surface finish of the features fabricated by FIB exhibited a significant improvement, and the ion fluence influence on the surface roughness of trenches with low aspect ratios could be considered as negligible. Using a fine beam probe, nano-gratings in the form of grooves with a width down to 54 nm and an aspect ratio higher than three were fabricated. The study showed that FIB machining could be an alternative technology to e-beam lithography for producing fused silica templates for UV nanoimprinting.     

Patterning of amorphous and polycrystalline Ni78B14Si8 with a focused-ion-beam

The machining response of amorphous and crystalline Ni₇₈B₁₄Si₈ was investigated when structuring substrates using focused-ion-beam (FIB) milling. In particular, the sputtering yield as a function of the scan speed, and the effects of ion fluence and scan speed on the milled depth were studied. The ion fluence dependent evolution of the cross-sectional profiles of trenches was examined by atomic force microscopy (AFM). When milling amorphous Ni₇₈B₁₄Si₈, it was found that the sputtering yield first decreased with increasing the beam scan speed, then kept constant within the scan speed range, up to 710 nm/s, investigated in this work; it was also found that the milled depth was almost proportional to the ion beam fluence. The patterning of polycrystalline Ni₇₈B₁₄Si₈ resulted in anisotropic milling-rates due to the varying orientation of the grains in the material. The analysis of the profile evolution in both materials indicated that the surface finish of trenches was scan speed, ion beam fluence and scan strategy dependent. The study demonstrated that direct patterning by FIB could be used for producing masters in amorphous Ni-based alloys for injection moulding and hot embossing.     

Kupfer

Ohne Zusammenfassung