Influence of camphorsulfonic acid in nitroxide‐mediated styrene miniemulsion polymerization

The rate‐accelerating effects of camphorsulfonic acid (CSA) on nitroxide‐mediated styrene miniemulsion polymerization were studied. Polymerizations were initiated with benzoyl peroxide (BPO) as an initiator and mediated with either 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) or 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyloxy (OH‐TEMPO). Although CSA has been used to accelerate the rate in bulk nitroxide‐mediated polymerizations, it has not been well studied in emulsion/miniemulsion. With dispersed systems, the effectiveness of CSA is likely to be affected by partitioning between the aqueous and organic phases. In styrene miniemulsion experiments performed over a range of conditions, the effect of adding CSA varied from negligible to significantly increasing the final conversion and molecular weight, depending on the nitroxide:BPO ratio. At a ratio of nitroxide:BPO = 1.7, the effect of CSA addition is small, whereas the final conversion and molecular weight are dramatically enhanced by CSA addition when the nitroxide:BPO ratio is 3.6. CSA is most effective in enhancing the rate and molecular weight when the initial free‐nitroxide concentration is higher. The magnitude of the rate and molecular weight enhancement was similar for TEMPO and OH‐TEMPO despite their differences in water solubility. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2828–2841, 2002     

Microchips as Controlled Drug-Delivery Devices

Controlled-release systems are common in a number of product areas, including foods, cosmetics, pesticides, and paper. Microencapsulated systems, for example, are used for the release of flavors and vitamins in foods, fragrances in perfumes, and inks in carbonless copy paper. Controlled-release systems for drug delivery first appeared in the 1960s and 1970s. In the past three decades, the number and variety of controlled release systems for drug-delivery applications has increased dramatically. Many of these use polymers having particular physical or chemical characteristics such as biodegradability, biocompatibility, or responsiveness to pH or temperature changes. However, recent advances in the field of microfabrication have created the possibility of a new class of controlled-release systems for drug delivery, namely, that of small, programmable devices. Their small size, potential for integration with microelectronics, and ability to store and release chemicals on demand could make controlled-release microchips useful in a number of areas, including medical diagnostics, analytical chemistry, chemical detection, industrial process monitoring and control, combinatorial chemistry, microbiology, and fragrance delivery. More importantly, drug-delivery microchips resulting from this convergence of controlled release and microfabrication technologies may provide new treatment options to clinicians in their fight against disease.     

A new route to vinyltributyltin compounds by flash pyrolysis of alkyltributyltin acetates

Flash pyrolysis of alkyltributyltin acetates, at high temperatures (600–850° C) under a moderate vacuum provides a convenient route to vinyltin derivatives.     

Improved model of multicomponent adsorption in reversed-phase liquid chromatography

This work presents a modification to the real adsorbed solution model using a Flory-Huggins type of expression that was reported previously. This modification consists in replacing the Flory-Huggins activity coefficient by the spreading pressure dependent approach. This new model takes into account explicitly the adsorbate-adsorbate interactions taking place in the adsorbed phase. It provides an excellent prediction of the competitive, ternary adsorption equilibrium of benzyl alcohol, 2-phenylethanol and 2-methyl benzyl alcohol observed in a reversed-phase liquid chromatographic system using information merely derived from the single-component adsorption experimental data.     

Spectroscopic investigation of ground state pyrrole (C4H5N): the NH stretch

We have recorded the infrared absorption spectrum of pyrrole at 0.005 cm⁻¹ spectral resolution using a Fourier transform interferometer. The rotational analysis of the fundamental N---H stretch (1¹₀) at 3530.811343(82) cm⁻¹ was performed. A set of 13 upper state rovibrational parameters was determined, allowing the 2715 assigned rovibrational lines to be reproduced with a standard deviation of 1.3 10⁻³ cm⁻¹. An attempt to record the fundamental band under slit-jet conditions is reported. The role of hot bands accompanying the series of the N---H stretch excitation is investigated. Effective vibrational parameters — ω⁰₁, X⁰₁₁, Y₁₁₁, X_1,24 — are obtained. The lower level in the hot band series is unambiguously identified as the V₂₄ = 1 level, by retrieving X_1,24 independently, from other spectral data. The observation of the complex band pattern accompanying the N---H series in the higher overtone range is discussed with the help of new data, recorded around the 1⁵₀ band at different temperatures using intracavity laser optoacoustic spectroscopy.     

Microphase separation of cationic poly(N-isopropylacrylamide) copolymers in water: Effect of the migration of charges

The structures of aqueous copolymer solutions have been examined through small angle neutron scattering. The copolymers contained mostly N-isopropylacrylamide (NIPAM) monomers. Poly (NIPAM) solutions have a lower critical solution temperature (LCST), above which the macromolecules separate from water. A small fraction of ionizable N,N-[(dimethylamino) propyl] methacrylamide (MADAP) monomers was introduced into the macromolecules. This had dramatic consequences on the solution behavior at temperatures above the LCST of PNIPAM, where phase separation would have been expected for the homopolymer. When all MADAP monomers were ionized, it was found that the solutions resisted the phase separation. At short spatial scales, the chains were collapsed but at large scales they formed branched aggregates that did not separate out of water. When only half of the MADAP monomers are ionized, the electrical charges were able to redistribute themselves along the chains. In this case, the rise in temperature caused a microphase separation where the electrical charges were relocated on a fraction of the chains that remained in solution.The other chains (or section of chains) formed large nodules of a polymer rich phase.     

Extrathermodynamic study of surface diffusion in reversed-phase liquid chromatography with silica gels bonded with alkyl ligands of different chain lengths

Surface diffusion on adsorbents made of silica gels bonded to C1, C4, C8, and C18 alkyl ligands was studied in reversed-phase liquid chromatography (RPLC) from the viewpoints of two extrathermodynamic relationships: enthalpy-entropy compensation (EEC) and linear free-energy relationship (LFER). First, the values of the surface diffusion coefficient (D(s)), normalized by the density of the alkyl ligands, were analyzed with the modified Arrhenius equation, following the four approaches proposed in earlier research. This showed that an actual EEC resulting from substantial physicochemical effects occurs for surface diffusion and suggested a mechanistic similarity of molecular migration by surface diffusion, irrespective of the alkyl chain length. Second, a new model based on EEC was derived to explain the LFER between the logarithms of D(s) measured under different RPLC conditions. This showed that the changes of free energy, enthalpy, and entropy of surface diffusion are linearly correlated with the carbon number in the alkyl ligands of the bonded phases and that the contribution of the C18 ligand to the changes of the thermodynamic parameters corresponds to that of the C10 ligand. The new LFER model correlates the slope and intercept of the LFER to the compensation temperatures derived from the EEC analyses and to several parameters characterizing the molecular contributions to the changes in enthalpy and entropy. Finally, the new model was used to estimate D(s) under various RPLC conditions. The values of D(s) that were estimated from only two original experimental D(s) data were in agreement with corresponding experimental D(s) values, with relative errors of approximately 20%, irrespective of some RPLC conditions.     

Highly stereoselective Friedel-Crafts type cyclization. Facile access to enantiopure 1,4-dihydro-4-phenyl isoquinolinones

The present report describes a stereoselective synthesis of 1,4-dihydro-4-phenyl isoquinolinones 5 based on a stereoselective Friedel-Crafts type cyclization. Cyclization precursors 1 were prepared in two steps, from the readily available (S)-mandelic acid, in 60-80% overall yield. The stereoselective electrophilic cyclization was accomplished in 20-86% yield and with 20-97% ee. In the course of this work, the presence of the amide carbonyl was found to be particularly important to guarantee a stereospecific process during the electrophilic aromatic substitution.     

INTERACTIONS AND PHOTOREACTIVITY OF 5-ALKOXYPSORALENS WITH THYMINE. A MODEL APPROACH

Abstract— In order to investigate the interactions and the photoreactions in solution between the thymine (thy) and the psoralen (Pso) rings, we have prepared model compounds Thy-(CH₂)_n-Pso in which two aromatic chromophores Thy and Pso are linked by flexible polymethylene chains of varying length (CH₂)_n. Two series of compounds were examined and compared as models for the two important drugs 5-methoxypsoralen and 8-methoxypsoralen. Results concerning the 5-alkoxypsoralen series are reported here. In water, these model molecules exhibit intramolecular ring-ring stacking interactions as indicated by hypochromism in the UV and by shielding of the protons in ¹H NMR spectroscopy. These interactions disappear in organic solvents. The photochemical properties of the models were examined in relation with their ground state interaction properties. Irradiation at 365 nm carried out at the usual concentrations (10^-2-10^-3 M) leads exclusively to a stereoselective dimerization involving the psoralen moieties of the models at the 3,4 double bonds. However, when operating at exceedingly low concentrations (2 × 10^-5 M ), the psoralen photodimerization is avoided and a highly regio and stereo-selective psoralen thymine photoaddition is observed involving the 3,4 double bond of psoralen leading to the cis adduct. The same reaction occurs for all models under study being independent of the length of the (CH₂)_n polymethylene linking chain, n = 2 to 6, 12 and of the solvent used. This is unambiguous proof for the highest intrinsic photoreactivity of the 3,4 vs the 4',5' double bond in 5-alkoxy psoralen.     

Stable γ-distonic oxonium ions: R\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm O}\limits^ + $\end{document}HCHR′ĊH2CHR″ and their characteristic reaction

The γ-distonic radical ions R$ \mathop {\rm O}\limits^ + $CHR′CH₂?HR″ and their molecular ion counterparts R$ \mathop {\rm O}\limits^{{\rm + } \cdot } $CHR′CH₂CH₂R″ have been studied by isotopic labelling and collision-induced dissociation, applying a potential to the collision cell in order to separate activated from spontaneous decompositions. The stability of CH₃$ \mathop {\rm O}\limits^ + $HCH(CH₃)CH₂?HCH₃, C₂H₅$ \mathop {\rm O}\limits^ + $HCH(CH₃)CH₂?HCH₃, CH₃$ \mathop {\rm O}\limits^ + $HCH(CH₃)CH₂?H₂, CH₃$ \mathop {\rm O}\limits^ + $HCH₂CH₂?HCH₃ and C₂H₅$ \mathop {\rm O}\limits^ + $HCH₂CH₂?HCH₃, has been demonstrated and their characteristic decomposition, alcohol loss, identified. For all these γ-distonic ions, the 1,4-H abstraction leading to their molecular ion counterpart exhibits a primary isotope effect.