Note sur le mécanisme réactionnel de la transposition de Dimroth. Une étude ab initio

An ab initio study of the Dimorth rerarrangement of the -amino-1,2,3,4-tetrazole leads to the conclusion teht in vapour phase the rate determining step is not the ring-chain isomerism, but is either the Z-E iomerism around the C?N double bond or the 1,3-sigmatropic shift of the proton.     

Comparison between the adsorption behaviors of an organic cation and an organic anion on several reversed-phase liquid chromatography adsorbents

Adsorption data of an organic cation (propranololium chloride) and an organic anion (sodium 1-naphthalene sulfonate) were measured by frontal analysis on two RPLC adsorbents, Symmetry-C18 and XTerra-C18, with aqueous solutions of methanol as the mobile phases. The influence of supporting neutral salts on the adsorption behavior of these two ions are compared. The Henry constants are close (H approximately 5). The four sets of isotherm data are all well accounted for using the bi-Moreau model. However, the isotherms of the two ions behave differently at high concentrations. The initial behaviors of all the isotherms are antilangmuirian but remain so in a much wider concentration range for the cation than for the anion, due to its stronger adsorbate-adsorbate interactions on the low-energy adsorption sites. The retention times of both ions increase with increasing concentration of neutral salt in the mobile phase, suggesting the formation of ion-pair complexes, with Cl- for the cation and with Na+ for the anion. The adsorbate-adsorbate interactions vanish in the presence of salt and the bi-Moreau isotherm model tends toward a bi-Langmuir model. Differences in adsorption behavior are also observed between the cation and the anion when bivalent inorganic anions and cations, respectively, are dissolved in the mobile phase. High concentration band profiles of 1-naphthalene sulfonic acid are langmuirian, except in the presence of a trivalent cation, while those of propranolol are antilangmuirian under certain conditions even with uni- or divalent cations.     

Electrochemical and kinetic study of oxygen in a perfluorotributylamine emulsion

Oxygen can be determined in a perfluorotributylamine emulsion used as a blood substitute by coulometry and polarography. The oxygen uptake of the emulsion (4.3 × 10^?3 mol l^?1 or 11 ml-% at 25°C and P_O2 = 760 mm Hg) is about three times greater than that of water. The adsorption of surfactant on a dropping mercury electrode changes the electrochemical parameters E_{$\text{1}\text{2}$}, α and k₃. The marked difference between the diffusion coefficients of oxygen and hydrogen peroxide (ratio 2.6) seems to be proceed from the ejection of oxygen molecules from the perfluorotributylamine droplets and from the insolubility of hydrogen peroxide molecules in the droplets. The constant rate of oxygen release by these droplets was estimated to be 10⁴ s^?1 by a stopped-flow spectrophotometric method. This constant rate seems to be linked with the particle diameter (0.2 μm) and the diffusion coefficient in the perfluorotributylamine droplets (1.6 × 10^?6 cm² s^?1).     

A further breakthrough in biphasic, rhodium-catalyzed hydroformylation: the use of Per(2,6-di-O-methyl)-β-cyclodextrin as inverse phase transfer catalyst

Solvent free biphasic hydroformylalion of various water-insoluble terminal olefins can be achieved in high yields and sclcctivitics by using a water-soluble rhodium/triphenylphosphine trisulfonate catalyst and per(2,6-di-o-mclhyl)-β-cyclodcxtrin as inverse phase transfer catalyst. The catalytic activities were up to ten times higher than those observed without pcr(2,6-di-o-methyl)-β-cyclodextrin.     

Comparison between adsorption isotherm determination techniques and overloaded band profiles on four batches of monolithic columns

The adsorption isotherms of 4-tert.-butyl phenol were measured on four different monolithic columns, using three different techniques, classical frontal analysis (FA), the perturbation on a plateau method (PP) and the recently introduced numerical procedure known as the inverse numerical method (IN). This last approach requires only the recording of a few overloaded profiles and has the potential advantage of affording a dramatic decrease of the amounts of compounds, solvent, and time needed to determine accurate estimates of the coefficients of the isotherm. The reproducibility of the adsorption data measured on the four columns is discussed with reference to the specific techniques used for obtaining these data and to the most suitable equation used for modeling them. The data obtained for the different columns were highly consistent. The inverse numerical approach was confirmed to provide a powerful, accurate, and economic method for measuring single component adsorption data.     

Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

The effect of increasing the average column pressure (ACP) on the heterogeneous adsorption of insulin variants on a C18-bonded silica was studied in isocratic reversed-phase HPLC. Adsorption isotherm data of lispro and porcine insulin obtained for values of the ACP ranging from 57 to 237 bar were fitted to the Langmuir-Freundlich and the Tóth equation. The resulting isotherm parameters, including the equilibrium adsorption constant and the heterogeneity index, were next used for the calculation of distribution functions characterizing the energy of interactions between the adsorbed insulin molecules and the stationary phase. It was observed that increasing the pressure by 180 bar causes a broadening of the distribution functions and a shift of the position of their maximum toward lower interaction energies. These findings suggest that, under high pressures, the insulin molecules interact with the stationary phase in a more diversified way than under low pressures. Additionally, the most probable value of the energy of the insulin-surface interactions becomes lower when the ACP increases. The pressure-induced changes in the interaction of insulin variants with the hydrophobic surface are attributed to a possible conformational flexibility of the molecular structure of this protein.     

Influence of camphorsulfonic acid in nitroxide‐mediated styrene miniemulsion polymerization

The rate‐accelerating effects of camphorsulfonic acid (CSA) on nitroxide‐mediated styrene miniemulsion polymerization were studied. Polymerizations were initiated with benzoyl peroxide (BPO) as an initiator and mediated with either 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) or 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyloxy (OH‐TEMPO). Although CSA has been used to accelerate the rate in bulk nitroxide‐mediated polymerizations, it has not been well studied in emulsion/miniemulsion. With dispersed systems, the effectiveness of CSA is likely to be affected by partitioning between the aqueous and organic phases. In styrene miniemulsion experiments performed over a range of conditions, the effect of adding CSA varied from negligible to significantly increasing the final conversion and molecular weight, depending on the nitroxide:BPO ratio. At a ratio of nitroxide:BPO = 1.7, the effect of CSA addition is small, whereas the final conversion and molecular weight are dramatically enhanced by CSA addition when the nitroxide:BPO ratio is 3.6. CSA is most effective in enhancing the rate and molecular weight when the initial free‐nitroxide concentration is higher. The magnitude of the rate and molecular weight enhancement was similar for TEMPO and OH‐TEMPO despite their differences in water solubility. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2828–2841, 2002     

A new route to vinyltributyltin compounds by flash pyrolysis of alkyltributyltin acetates

Flash pyrolysis of alkyltributyltin acetates, at high temperatures (600–850° C) under a moderate vacuum provides a convenient route to vinyltin derivatives.     

Improved model of multicomponent adsorption in reversed-phase liquid chromatography

This work presents a modification to the real adsorbed solution model using a Flory-Huggins type of expression that was reported previously. This modification consists in replacing the Flory-Huggins activity coefficient by the spreading pressure dependent approach. This new model takes into account explicitly the adsorbate-adsorbate interactions taking place in the adsorbed phase. It provides an excellent prediction of the competitive, ternary adsorption equilibrium of benzyl alcohol, 2-phenylethanol and 2-methyl benzyl alcohol observed in a reversed-phase liquid chromatographic system using information merely derived from the single-component adsorption experimental data.     

Spectroscopic investigation of ground state pyrrole (C4H5N): the NH stretch

We have recorded the infrared absorption spectrum of pyrrole at 0.005 cm⁻¹ spectral resolution using a Fourier transform interferometer. The rotational analysis of the fundamental N---H stretch (1¹₀) at 3530.811343(82) cm⁻¹ was performed. A set of 13 upper state rovibrational parameters was determined, allowing the 2715 assigned rovibrational lines to be reproduced with a standard deviation of 1.3 10⁻³ cm⁻¹. An attempt to record the fundamental band under slit-jet conditions is reported. The role of hot bands accompanying the series of the N---H stretch excitation is investigated. Effective vibrational parameters — ω⁰₁, X⁰₁₁, Y₁₁₁, X_1,24 — are obtained. The lower level in the hot band series is unambiguously identified as the V₂₄ = 1 level, by retrieving X_1,24 independently, from other spectral data. The observation of the complex band pattern accompanying the N---H series in the higher overtone range is discussed with the help of new data, recorded around the 1⁵₀ band at different temperatures using intracavity laser optoacoustic spectroscopy.