Ligand discrimination in the reaction of nitrones with [PtCl2(PhCN)2]. Selective formation of mono-oxadiazoline and mixed bis-oxadiazoline complexes under thermal and microwave conditions

[2+3] Cycloaddition of nitrones to the nitrile ligands in the complexes cis- or trans-[PtCl2(PhCN)2] occurs under ligand differentiation and allows for selective synthesis of complexes of the type cis- or trans-[PtCl2(oxadiazoline)(PhCN)]. Microwave irradiation enhances the reaction rates of the cycloaddition considerably and further favours the selectivity towards the mono-cycloadduct with respect to thermal conditions, because the first cycloaddition is accelerated to a higher extent than the second one. Reaction of the trans-substituted mono-oxadiazoline complexes with a nitrone different from the one used for the first cycloaddition step gives access to mixed bis-oxadiazoline compounds of the composition trans-[PtCl2(oxadiazoline-a)(oxadiazoline-b)]. The corresponding cis-configured complexes, however, do not undergo further cycloaddition. All reactions described occur without isomerisation of the stereochemistry around the platinum center, independently of whether thermal or microwave heating is applied.     

The chemistry of (1-azabuta-1,3-diene)tricarbonyliron(0) complexes

In this review, an overview of synthetic and structural aspects of 1-azabuta-1,3-diene complexes of iron is given and the reactivity of these complexes is discussed with regard to inorganic, organometallic, organic and stereochemical aspects of their chemistry. Their application in the synthesis of organic and organometallic target compounds, or as transfer reagents of the tricarbonlyiron(0) moiety is demonstrated.     

Direct calculation of interconversion barriers in dynamic chromatography and electrophoresis: Isomerization of captopril

Dynamic capillary electrophoresis (DCE) and direct calculation of the rate constants of isomerization has been applied to determine the cis-trans isomerization barriers of the angiotensin-converting enzyme inhibitor captopril. The separation of the rotational cis-trans isomeric drug has been performed in an aqueous 50 mM borate buffer at pH 9.3. Interconversion profiles featuring plateau formation, peak-broadening, and peak coalescence were observed. To determine the rate constants of the forward and backward reaction (k(cis-->trans) and k(trans-->cis)) of the isomerization process in dynamic capillary electrophoresis, a novel straightforward calculation method using the experimental parameters plateau height, h(plateau), peak width at half height w(h), the total migration times of the cis-trans isomers t(R) and the electroosmotic break-through time t(0) as well as the peak ratio of the cis-trans isomers is presented for the first time. From temperature dependent measurements the rate constants k(cis-->trans) and k(trans-->cis) and the kinetic activation parameters DeltaG( not equal), DeltaH( not equal), and DeltaS( not equal) of the cis-trans isomerization of captopril were obtained. From the activation parameters the isomerization barriers of captopril at 37 degrees C under basic conditions were calculated to be DeltaG( not equal) (cis-->trans) = 90.3 kJ.mol(-1)and DeltaG( not equal) (trans-->cis) = 90.0 kJ.mol(-1*).     

Electronic and Steric Influence of Axial and Equatorial Ligands in Vitamin B12 Model Complexes Derived from Cobaloxime: Electrochemical and 59Co-NMR Studies

In four series of strictly related organocobalt complexes, derived from cobaloximes by replacement of the O…H…O with O…-BF₂…O and/or (CH₂)₃ groups, the trends of ⁵⁹Co-NMR shielding and electrochemical data are discussed. A largely parallel behaviour of the plots of E_1/2(I) values for the first Co(III)/Co(II) electron transfer vs. the ₅₉Co chemical shifts reflects the similar sensitivity of the two parameters to a change in electron affinity of the central metal ion due to a variation of the organic group R. E_1/2(II) values for the second Co(II)/CO(I) electron transfer are less sensitive to the change of R, but the trend of the plot vs. δ(₅₉Co) is still parallel in the four series. Consistent deviations from a roughly linear dependence of E_1/2(I) on pK_a of the hydrocarbon acid corresponding to R, on Taft constant s?_* and on ⁵⁹Co shielding are noticed for the isopropyl derivatives and attributed to a steric effect. This was confirmed in a series of R? Co(DMG)pyridine complexes in which ⁵⁹Co shielding decreases steadily with increasing steric parameter E_s (Taft) of the alkyl group. There is experimental evidence from X-ray data that δ(⁵⁹Co) decreases with an increase of the Co? C bond length, illustrating steric hindrance in alkyl coordination to be responsible for the decreased shielding of the ⁵⁹Co nucleus. The relative displacements of the graphic displays for the different series reflect the effect of changes in electron affinity of the redox center, due to the equatorial ligand, which, in turn, is caused by variations in the electron-withdrawing power due to the introduction of the BF₂ group and by the change from ?2 to ?1 valence of the (CH₂)₃-capped ligands.     

Säurekatalysierte Umlagerungen von 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.02,7]oct-3-en-8endo-olen

Acid Catalysed Rearrangement of 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.0^2,7]oct-3-en-8endo-ols The tricyclic alcohols 2,3,4 and 6 (Scheme 1) are synthesized by the reaction of the tricyclic ketone 1 with sodiumborohydrid or metalloorganic reagents. Their configuration at C(8) is determined by NMR. in the presence of Eu(fod)₃. The exo-attack of 1 by the nucleophil forming the endo-alcohol is favored, the π-electrons of C(3) = C(4) hindering the endo-attack. On treatment with sulfuric acid in dioxane/water at 25° the tertiary alcohols yield aryl-substituted ketones. 3 gives in 78.5% yield a mixture of the 3-(dimethylphenyl)-2-butanones 12 and 13 , in addition to 16.5% of (2,3,4-trimethylphenyl)-2-propanon ( 14 ) (Scheme 2). The alcohols 4 and 6 yield mixtures of the 2-(dimethylphenyl)-3-pentanones 19 and 20 (72%), and 2-(dimethylphenyl)-propiophenones 21 and 22 (68%), respectively (Scheme 2). In the case of the secondary alcohol 2 mainly products derived from hydration at the C(6), C(9) double bond are formed, namely the mixture of diols 23 and 24 (21%), and the mixture of the isomeric 2-(dimethylphenyl)propanals 25, 26 and 27 (3%) (Scheme 3). - The structures of 12–14, 19/20, 21/22, 23/24 and 25/26/27 were established by spectroscopic data. In the case of 12 and 13 the degradation of their mixture to the known 1-(dimethylphenyl)ethanols 17/18 confirmed the assignment. - The most probable mechanism for the rearrangement of 3 is shown in Schemes 4 and 5. The reaction proceeds from 3 through a, b and g to 12 and 13; 14 is formed via e, f and i . In the case of 4 and 6 only the reaction analogue to 3 → a → b → g ?12/13 takes place. The isomeric aldehyds 25–27 formed from 2 could have the structures s, t , and v . The former two could be generated in a similar way as 12/13 from 3 , the latter one as shown in Scheme 8.     

Selenium speciation in foods: Preliminary results on potatoes

The present paper deals with the speciation of selenium in potatoes (enriched or not in selenium). The study was carried out by using differential pulse cathodic stripping voltammetry (DPCSV) for quantifying selenium. Results obtained provide evidence that the selenium content in the protein fraction is rather independent from the selenium added to the plants during their growth. On the contrary, the amount of Se in the non-protein fraction (water and starch) in Se-enriched sample is significantly higher than in non-enriched one, suggesting that it is the main selenium-storing site. In this fraction the Se(VI)/Se(IV) ratio seems independent from selenium application but it may be related to the redox conditions. The accumulation of selenium in the non-protein fraction is tentatively ascribed to the “Se–starch interaction” that should be able to modulate both the Se absorption into proteins and, possibly, its toxic effect for the plant itself.     

Genes encoding enzymes responsible for biosynthesis of L-lyxose and attachment of eurekanate during avilamycin biosynthesis

The oligosaccharide antibiotic avilamycin A is composed of a polyketide-derived dichloroisoeverninic acid moiety attached to a heptasaccharide chain consisting of six hexoses and one unusual pentose moiety. We describe the generation of mutant strains of the avilamycin producer defective in different sugar biosynthetic genes. Inactivation of two genes (aviD and aviE2) resulted in the breakdown of the avilamycin biosynthesis. In contrast, avilamycin production was not influenced in an aviP mutant. Inactivation of aviGT4 resulted in a mutant that accumulated a novel avilamycin derivative lacking the terminal eurekanate residue. Finally, AviE2 was expressed in Escherichia coli and the gene product was characterized biochemically. AviE2 was shown to convert UDP-D-glucuronic acid to UDP-D-xylose, indicating that the pentose residue of avilamycin A is derived from D-glucose and not from D-ribose. Here we report a UDP-D-glucuronic acid decarboxylase in actinomycetes.     

FTIR-screening of carbonyl compounds in metal working fluid aerosols

Due to the complex composition of metal working fluids (MWF) the determination of all individual compounds is sometimes difficult and very expensive. Today the widely used method for the quantification of airborne MWFs consists of a non specific IR analysis of their C-H valence bands. With a new design of sample cell this inexpensive technique was extended to a more detailed screening of the MWF composition, especially the detection of carbonyl compounds in MWFs and their aerosols and vapors. The screening method was evaluated for the determination of concentrations of the aldehyde nonanal and the ketone diacetone alcohol in air in laboratory experiments. In preliminary workplace studies the applicability of this method to the (semi-)quantitative determination of carbonyl compounds in airborne MWFs is shown. The screening method was found to be very useful, specially to detect alterations in the composition of the MWF due to industrial use. Received: 16 January 1997 / Revised: 9 April 1998 / Accepted: 14 April 1998     

Electronic communication through the ureylene bridge: spectroscopy, structure and electrochemistry of dimethyl 1,1-ureylenedi(1-ferrocenecarboxylate)

Dimethyl 1^′,1^′-ureylenedi(1-ferrocenecarboxylate) (1) formed during the synthesis of 1-amino, 1^′-ferrocenecarboxylic acid shows virtual molecular centrosymmetry. Electronic coupling between the two Fc groups through the ureylene bridge results in both Fc groups being individually oxidizable (ΔE_1/2?0.14 V). The possible existence of intermolecular electronic communication has discussed. The oxidation was followed by spectroelectrochemistry. The separation between the two halfwave potentials ΔE_1/2=137±5 mV and the comproportionation constant K_c=207.     

Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.