Parallel implementation of a Monte Carlo molecular stimulation program

Molecular simulation methods such as molecular dynamics and Monte Carlo are fundamental for the theoretical calculation of macroscopic and microscopic properties of chemical and biochemical systems. These methods often rely on heavy computations, and one sometimes feels the need to run them in powerful massively parallel machines. For moderate problem sizes, however, a not so powerful and less expensive solution based on a network of workstations may be quite satisfactory. In the present work, the strategy adopted in the development of a parallel version is outlined, using the message passing model, of a molecular simulation code to be used in a network of workstations. This parallel code is the adaptation of an older sequential code using the Metropolis Monte Carlo method. In this case, the message passing interface was used as the interprocess communications library, although the code could be easily adapted for other message passing systems such as the parallel virtual machine. For simple systems it is shown that speedups of 2 can be achieved for four processes with this cheap solution. For bigger and more complex simulated systems, even better speedups might be obtained, which indicates that the presented approach is appropriate for the efficient use of a network of workstations in parallel processing.     

Heteronuclear Nickel‐Iron Complexes and the Crystal Structure of [Fe2(CO)6(μ3‐S)2{Ni(dppe)}]

A series of heteronuclear nickel‐iron complexes [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(PPh₃)₂}] ( 1 ), [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(dppe)}] ( 2 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(PPh₃)₂}] ( 3 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(dppe)}] ( 4 ) and [Fe₂(CO)₆(μ‐SPh)(μ₃‐S){NiCl(dppe)}] ( 5 ) have been prepared. The structure of 4 has been determined by X‐ray crystallography. The central metal‐sulfur core of 4 has a trigonal bipyramidal shape with a NiFe₂ base plane with two axial sulfur atoms. Each iron atom is 5‐coordinate forming a distorted square pyramid; the nickel is square planar coordinated by two sulfur atoms and two phosphorus atoms.     

A universal temperature controlled membrane interface for the analysis of volatile and semi-volatile organic compounds

A universal temperature controlled membrane interface (TCMI) has been constructed for hollow-fibre membranes. The membrane temperature is controllable in the range -70 to 250 degrees C using an electric heater and a flow of cooled nitrogen or helium gas. Volatile and semi-volatile organic compounds may be detected either by continuous diffusion across the membrane or by in-membrane pre-concentration followed by thermal desorption into the detector. The TCMI interface is demonstrated in combination with mass spectrometry and GC-MS, for the determination of VOCs and SVOCs in aqueous and air samples and for the on-line monitoring of a bioreactor.     

Réactions de germylènes avec divers oxirannes et le thiiranne. Mise en évidence de germanones et germathiones intermédiaires. Communication préliminaire

Complexed dialkylgermylenes R₂GeNR₃ or R₂GePy react with oxiranes or thiirane and lead to dialkylgermanone and germathione via germaoxetanes or germathiacyclobutane. The formation of germadioxolanes or germadithiolane finally observed arises from condensation of dialkylgermanone (or germathione) on oxiranes (or thiirane).     

An unprecedented highly efficient solvent-free oxidation of alkynes to α,β-acetylenic ketones with tert-butyl hydroperoxide catalyzed by water-soluble copper complex

The catalytic system composed of CuCl₂ and 2,2′-biquinoline-4,4′-dicarboxylic acid dipotassium salt (BQC) was found to be highly efficient for the selective α-oxidation of internal alkynes to the corresponding α,β-acetylenic ketones, with aqueous tert-butyl hydroperoxide under mild conditions. For the first time, full conversions of alkynes were reached with excellent selectivities, and propargylic tert-butylperoxy ethers were observed and suggested as the reaction intermediates. In the case of terminal alkynes, the oxidations are sluggish and low yields ranging from 32% to 40% were obtained.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Tailoring the cavities of hydrogen-bonded amphidynamic crystals using weak contacts: towards faster molecular machines

This work describes the use of C–H⋯F–C contacts in the solid-state from the stator towards the rotator to fine-tune their internal motion, by constructing a set of interactions that generate close-fitting cavities in three supramolecular rotors 1–3I. The crystal structures of these rotors, determined by synchrotron radiation experiments at different temperatures, show the presence of such C–H⋯F–C contacts between extended carbazole stators featuring fluorinated phenyl rings and the 1,4-diazabicyclo[2.2.2]octane (DABCO) rotator. According to the ²H NMR results, using deuterated samples, and periodic density functional theory computations, the rotators experience fast angular displacements (preferentially 120° jumps) due to their low rotational activation energies (E_a = 0.8–2.0 kcal mol⁻¹). The higher rotational barrier for 1 (2.0 kcal mol⁻¹) is associated with a larger number of weak C–H⋯F–C contacts generated by the stators. This strategy offers the possibility to explore the correlation among weak intermolecular forces, cavity shape, and internal dynamics, which has strong implications in the design of future fine-tuned amphidynamic crystals.

This work describes the use of C–H⋯F–C contacts in the solid-state from the stator towards the rotator to fine-tune their internal motion, by constructing a set of interactions that generate close-fitting cavities in three supramolecular rotors 1–3I.     

Short synthesis of the CDEF ring system of lactonamycin

[reaction: see text]. A synthesis of the CDEF fragment of lactonamycin is achieved in eight steps (six pots) from the known and readily available anhydride 4 via a Diels-Alder reaction between tricycle 13 and 2,3-dimethylbenzoquinone.     

MP2 study of substituent effects of 2-substituted alkyl ethyl methylcarbamates in homogeneous, unimolecular gas phase elimination reaction

Møller-Plesset MP2/6-31G method was used to examine the gas-phase elimination of 2-substituted alkyl ethyl N,N-dimethylcarbamates. The results of these calculations support a concerted non-synchronous six-membered cyclic transition state mechanism for carbamates containing a C_β–H bond at the alkyl side of the ester. These substrates produce the N,N-dimethylcarbamic acid and the corresponding olefin. The unstable intermediate, N,N-dimethylcarbamic acid, rapidly decomposes through a four-membered cyclic transition state to dimethylamine and CO₂ gas. Correlation of the logarithm of theoretical rate coefficients against original Taft's σ* values gave an approximate straight line (ρ*=−1.39, r=0.9558 at 360 °C). In addition to this fact, when log k_rel is plotted against the theoretical log k_rel for 2-substituted ethyl N,N-dimethylcarbamates a reasonable straight line (r=0.9919 at 360 °C) is obtained, suggesting similar mechanism.     

Racemic 2‐isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiazolidin‐4‐one crystallizes in the space group P212121 with Z′ = 2: two different interpenetrating three‐dimensional frameworks formed by C—H...O hydrogen bonds

rac‐2‐Isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiadiazolin‐4‐one, C₁₃H₁₆N₂O₃S, is a rare example of a racemate crystallizing in the space group P2₁2₁2₁, with one molecule each of S and R configurations, whose conformations are almost mirror images, within the asymmetric unit. The molecules of S configuration are linked by two C—H...O hydrogen bonds into a three‐dimensional framework, and the molecules of R configuration are linked by two further C—H...O hydrogen bonds into a different type of three‐dimensional framework; the two frameworks are linked by a fifth C—H...O hydrogen bond.