Heterogeneous reactions of solid nickel(II) complexes

The influence of different modes of preparation on the stoichiometry of thermal decomposition of isothiocyanatonickel(II) complexes with ammonia was studied. It was found that the complex Ni(NCS)₂(NH₃)₄ (I) prepared by heterogeneous reaction undergoes decomposition in two steps (–2 NH₃, –2 NH₃), while for complex II, of the same composition but prepared by homogeneous reaction from solution, the decomposition proceeds in three steps (–1 NH₃, –1 NH₃, –2NH₃). Electronic and infrared absorption spectra were used for the study of the spectral properties of the starting complex. It was found that the different stoichiometries of thermal decompositions of complexes I and II do not cause differences in the bonding strength of the ammonia molecules (chemical factor); this effect is rather brought about by physical factors such as different imperfections of the crystal lattice.

---

Zusammenfassung Der Einfluß der Herstellung auf die Stöchiometrie der thermischen Zersetzung von Amin-Komplexen des Isothiocyanatonickels wurde studiert. Der Zerfall des Komplexes Ni(NCS)₂(NH₃)₄ (I), hergestellt durch heterogene Reaktion, verlief in zwei Etappen (–2 NH₃, –2 NH₃). Beim selben Komplex (II), hergestellt durch homogene Reaktion in Lösung, wurden jedoch drei Etappen beobachtet (–1 NH₃, –1 NH₃, –2 NH₃). Die Eigenschaften des Ausgangsproduktes wurden durch Elektronen- und IR-Spektroskopie untersucht. Das unterschiedliche thermische Verhalten ist nicht auf eine verschiedene Bindungsstärke der NH₃ Moleküle, sondern auf physikalische Ursachen, wie z. B. Unregelmässigkeiten im Kristallgitter zurückzuführen.

---

Résumé On a étudié l'influence des diverses méthodes de préparation sur la stoechiométrie de la réaction de décomposition thermique des complexes de l'isothiocyanate de nickel(II) avec l'ammoniac. On a établi que le complexe Ni(SCN)₂(NH₃)₄, (I), préparé rar réaction hétérogène, subit une décomposition en deux étapes (–2NH₃, –2NH₃), tandis que le complexe (II), de même composition, mais préparé par réaction homogène, à partir de solutions, se décompose en trois étapes (–1NH₃,–1NH₃, –2NH₃). Les propriétés spectrales du complexe initial ont été étudiées par absorption électronique et infrarouge. On a trouvé que les différences de stoechiométrie des réactions de décomposition thermique des complexes (I) et (II) n'apportaient pas de différences entre les énergies de liaison des molécules d'ammoniac (facteur chimique). C'est plutôt à des facteurs physiques, comme les différentes imperfections du réseau cristallin, que cet effet serait dû.

---

(II) . , Ni(NCS)₂(NH₃)₄ (I), , (–2NH₃,–2NH₃). , II , , (–1 NH₃,–1 NH₃ –2NH₃). . , I II ( ), , .

     

Thermometric determination and analytical application of the landolt effect

The thermometric determination of the Landolt effect applied to the hydrogen peroxide—iodide—ascorbic acid reaction is described. The appropriate kinetic equations are used to interpret the thermometric curve and the calibration curve of the indicator reaction catalysed by molybdenum. The effects of the iodide, hydrogen peroxide, and hydrogen ion concentrations on the shape of the thermometric curves are discussed. This thermometric method can be used to determine micro amounts of iron, zirconium, thorium, vanadium, molybdenum and tungsten, with satisfactory accuracy and precision.     

The relationship between the structures of Cu(II) complexes and their chemical transformations

The paper presents the results of a study of M ₂ ^I M ^II(SO₄)₂ compounds withM ^I= K, Rb, Cs or Tl, andM ^II=Cu or Ni, in the interval from room temperature to the melting temperature. All the compounds studied show endo- or exothermic excursions in their DTA curves, corresponding to phase transitions connected with colour changes of the compounds. For M ₂ ^I Cu(SO₄)₂, whereM ^I is K or Tl, several modifications could be prepared at laboratory temperature, probably distortion isomers. No modifications of this type could be prepared, however, for M ₂ ^I Ni(SO₄)₂ compounds.

---

Zusammenfassung Die Ergebnisse einer Untersuchung von M ₂ ^I M ^II(SO₄)₂-Verbindungen Cs, Tl;M ^II=Cu, Ni) im Temperaturbereich von Raum- bis Schmelztemperatur werden beschrieben. Alle untersuchten Verbindungen zeigen in ihren DTA-Kurven mit Farbänderungen einhergehende, durch Phasenumwandlungen bedingte endo- und exotherme Peaks. Bei Laboratoriumstemperatur konnten verschiedene Modifikationen von M ₂ ^I Cu(SO₄)₂ (mitM ^I gleich K oder Tl) hergestellt werden, wobei es sich wahrscheinlich um Distorsionsisomere handelt. Keine Modifikationen dieses Typs konnten jedoch für M ₂ ^I Ni(SO₄)₂ erhalten werden.

---

M ₂ ^I M ^II(SO₄)₂, ¹-, Rb, Cs Tl, aM ¹¹-Cu Ni, . - -, , . M ₂ ^I Cu(SO₄)₂, ¹- l, , , , . , M _i ² Ni(SO₄)₂ .

     

Semiautomatic and automatic catalytic amperometric and catalytic constant-current potentiometric titrations of gold(III)

Semiautomatic and automatic amperometry and constant-current potentiometry were used to follow the course of catalytic titration of gold(III) with potassium iodide. The Ce(IV)-As(III) system in the presence of sulfuric acid was used as the indicator reaction. The possibilities of the application of two types of graphite electrodes were investigated. The effect of concentration of the indicator reaction components, and the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 80–900 μg of gold(III) were determined with a relative standard deviation less than 1.1%. The results obtained are in good agreement with those of comparable methods.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Thermal properties of solid nickel(II) coordination compounds

The paper deals with the chemical and physical factors influencing the stoichiometry of thermal decomposition of solid coordination compounds. Nickel(II) coordination compounds were used as examples: the problem of the relationship between the structure of the initial compound (and of its intermediates) and the stoichiometry of thermal decomposition is discussed; experimental conditions are shown to affect this decomposition, and the conceptions of the apparent and real stoichiometries of thermal decomposition are discussed. The results obtained may have a more general meaning.

---

Zusammenfassung Der Beitrag befa\t sich mit den chemischen und physikalischen Faktoren, welche die Stöchiometrie der thermischen Zersetzung fester Koordinationsverbindungen beeinflussen. Koordinationsverbindungen von Nickel(II) wurden als Beispiel eingesetzt; das Problem des Zusammenhanges zwischen Struktur der Ausgangsverbindung (und seiner IntermediÄrprodukte) und der Stöchiometrie der thermischen Zersetzung wird erörtert; die die Zersetzung beeinflussenden Versuchsbedingungen werden gezeigt und das Konzept der sogenannten scheinbaren und tatsÄchlichen Stöchiometrie der thermischen Zersetzung wird beschrieben. Die erhaltenen Ergebnisse dürften von allgemeinerer Bedeutung sein.

---

Résumé L'article considère les facteurs chimiques et physiques qui influencent la stchiométrie des réactions de décomposition thermique des composés de coordination solides. Les composés de coordination du nickel(II) ont été choisis pour illustrer le problème des relations entre la structure du composé initial (et de ses intermédiaires) et la stchiométrie de la réaction de décomposition thermique. On montre que les conditions expérimentales influencent la décomposition et on discute le principe des réactions stchiométriques de décomposition thermique dites «apparentes» et «réelles». Les résultats obtenus sont probablement de portée plus générale.

---

, . $ (II) $ ( ) $ . , $ , $ . .

---

---

Reported at the 7th Seminar on Modern Methods in Inorganic Chemistry. Harmonia-Bratislava, 1977.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10-1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

Unraveling σ and π Effects on Magnetic Anisotropy in cis‐NiA4B2 Complexes: Magnetization,HF‐HFEPR Studies,First‐Principles Calculations,and Orbital Modeling

By using complementary experimental techniques and first‐principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C_2v, has been investigated. Four complexes have the general formula [Ni(bpy)X₂]ⁿ⁺ (bpy=2,2′‐bipyridine; X₂=bpy ( 1 ), (NCS^?)₂ ( 2 ), C₂O₄^2? ( 3 ), NO₃^? ( 4 )). In the fifth complex, [Ni(HIM₂‐py)₂(NO₃)]⁺ ( 5 ; HIM₂‐py=2‐(2‐pyridyl)‐4,4,5,5‐tetramethyl‐4,5‐dihydro‐1H‐imidazolyl‐1‐hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM₂‐py. Analysis of the high‐field, high‐frequency electronic paramagnetic resonance (HF‐HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from ?1 to ?10 cm^?1. First‐principles SO‐CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3 , on one hand, and 4 and 5 , on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and g_i) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the e_g‐like orbitals and is due to the difference in the σ‐donor strength of NO₃^? and bpy or HIM₂‐py, whereas the difference in anisotropy between the two compounds is due to splitting of the t_2g‐like orbitals; and 2) the anisotropy of complexes 1 – 3 arises from the small splitting of the t_2g‐like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.     

Calculating all elements of minimal index in the infinite parametric family of simplest quartic fields

It is a classical problem in algebraic number theory to decide if a number field is monogeneous, that is if it admits power integral bases. It is especially interesting to consider this question in an infinite parametric familiy of number fields. In this paper we consider the infinite parametric family of simplest quartic fields K generated by a root ξ of the polynomial P _t (x) = x ⁴ ? tx ³ ? 6x ² +tx+1, assuming that t > 0, t ≠ 3 and t ² +16 has no odd square factors. In addition to generators of power integral bases we also calculate the minimal index and all elements of minimal index in all fields in this family.