车辆寻北车长镜的设计与实现

 描述了一种车辆寻北车长镜的设计,采用2个光纤陀螺和2个加速度计,解决了惯性测量组件力学编排结构设计与寻北、瞄准线稳定共享陀螺信息的问题,设计系统控制流程和组合算法,在保障车长镜瞄准线稳定精度的同时,增加了车体方位平台非调平状态下任意位置的寻北功能,寻北方法是：车长镜方位固定四位置转动,每个位置点停止、延迟、数据采样、存储,四位置转动完毕后,对存储数据组合、滤波、解算,输出寻北结果。对方案设计、实现途径和解算推导方法作了详细论述,性能测试验证设计实现达到预期效果。     

激光空间相干合成效果评价方法的研究

根据目标上实际最大光强与理想合成效果下最大光强的比值定义了合成效果因子,用以评价相干合成效果.在此基础上研究了影响相干合成效果的主要因素,并对合成效果因子的传输特性进行了研究.结果表明:阵列紧密程度对合成效果影响不大,在较小的空间占空比下有可能得到较好的合成效果.影响合成效果的主要因素是随机相位差,当随机相位差增大到一定程度时,光束合成其实已经由相干合成过渡到了非相干合成,得不到预期的相干合成效果;随着传输距离的增大,空间占空比对合成效果因子的影响将进一步减小,影响合成效果的主要因素之一是随机相位差.     

掺杂对一维光子晶体带隙传输特性的影响

 基于传输矩阵法,数值研究了掺杂对一维光子晶体带隙特征的影响。研究表明：掺杂时,禁带中心会出现一导带,导带深度会随着掺杂位置、杂质折射率的变化而发生变化。当晶体结构给定时,总存在一个掺杂位置,使其禁带中心的导带深度达到最深;而对于给定的掺杂位置,当杂质折射率为某特定值时,禁带中心同样也会出现一个深度最深的导带,这种特性可应用于滤波器件和光学谐振腔的设计。     

Orbit determination and time synchronization for a GEO/IGSO satellite navigation constellation with regional tracking network

Aiming at regional services,the space segment of COMPASS (Phase I) satellite navigation system is a constellation of Geostationary Earth Orbit (GEO),Inclined Geostationary Earth Orbit (IGSO) and Medium Earth Orbit (MEO) satellites.Precise orbit determination (POD) for the satellites is limited by the geographic distribution of regional tracking stations.Independent time synchronization (TS) system is developed to supplement the regional tracking network,and satellite clock errors and orbit data may be obtai...     

Study of the primordial lithium abundance

Lithium isotopes have attracted an intense interest because the abundance of both 6Li and 6Li from big bang nucleosynthesis (BBN) is one of the puzzles in nuclear astrophysics. Many investigations of both astrophysical observation and nucleosynthesis calculation have been carried out to solve the puzzle, but it is not solved yet. Several nuclear reactions involving lithium have been indirectly measured at China Institute of Atomic Energy, Beijing. The Standard BBN (SBBN) network calculations are then perfo...     

Properties of the πh_(9/2)  νi_(13/2) band in odd-odd ~(188)Au

A new rotational band has been identified and assigned to 188Au for the first time using the 173Yb(19F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh9/2  νi13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around 188Au for the πh9/2  νi13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.     

Measurements on diproton emission from the break-up channels of ~(23)Al and ~(22)Mg

Two-proton relative momentum distributions from the break-up channels 23Al→p+p+21Na and 22Mg→p+p+20Ne at an energy of 60-70 A MeV have been measured together with two-proton opening angles at the projectile fragment separator beamline (RIPS) in the RIKEN Ring Cyclotron Facility. The results demonstrate the existence of diproton emission component from single-step 2He for highly excited 23Al and 22Mg.     

Entanglement in a two-spin (1/2,3/2) mixed-spin Heisenberg XX chain with an inhomogeneous external magnetic field

By using the concept of negativity, we investigate the thermal entanglement of a two-spin (1/2, 3/2) mixed-spin Heisenberg XX chain with an inhomogeneous external magnetic field. We obtain the analytical results of entanglement of this model. For the case of uniform magnetic field, we find that the critical temperature is higher than the results of the spin-1/2 chain and (1/2,1) mixed-spin chain. And by adjusting the nonuniform parameter b, one is able to obtain more entanglement at a higher temperature.     

基于DSP的高功率TEACO2激光器控制系统的高精度数据采集

针对基于DSP的高功率TEA CO2激光器控制系统直接利用DSP F2812内置A/D转换器（ADC）进行模拟量采样时存在转换误差较大,且模拟量易受电磁干扰等问题,从硬件和软件两个角度提出了校正DSP2812内置ADC的方法。硬件上采用硬件模拟滤波和隔离等手段对输入的模拟量进行处理;软件校正则通过将两路给定的参考电压值送入DSPF2812内置A/D转换器的两个转换通道,计算出ADC的偏置误差和增益误差,以此误差对其它通道A/D转换器进行校正。最后,实验分析了参考电压和A/D采样时钟频率对A/D转换精度的影响。结果表明,提出的方法能有效地提高A/D转换器的精度,A/D转换误差达到±3 LSB,特别是在对腔压值精度要求很高的0～12 000 Pa区段,A/D转换精度达±1 LSB,可以保证TEA CO2激光器的可靠运行。     

空间相机电控机箱的热设计及仿真分析

为了保证空间相机电控机箱在轨运行期间的工作温度满足使用要求,根据电控机箱的结构特点和导热路径,对电控机箱内部大功耗电子元器件进行了详细热控设计,解决了某些电子元器件发热量大、导热路径较长的问题。以某个典型元器件为例,进行了散热效果估算。最后应用有限元分析软件IDEAS-TMG建立了详细的电控机箱热分析有限元模型,根据电控机箱所处温度边界条件进行了稳态仿真分析,给出了电控机箱整体的热响应性能、印制线路板（PCB）及板上大功耗电子元器件的稳态温度分布云图,结果显示,PCB的温度为40.6～51.1℃,板上大功耗电子元器件的结温为46.3～62.5℃,均满足热控设计的指标要求。热分析结果表明电控机箱热设计合理可行,能够满足使用要求。