Small-angle neutron and X-ray scattering from amphiphilic stimuli-responsive diamond-type bicontinuous cubic phase

The structural evolution of a diamond-type bicontinuous lipid cubic phase upon application of thermal and chemical (hydration agent) stimuli is investigated by means of small-angle neutron (SANS) and X-ray scattering (SAXS). The soft-matter cubic architecture responds by dramatic swelling (DLarge cubic structure) upon incorporation of a hydration-enhancing guest component (octyl glucoside) at low and ambient temperatures, the aqueous channel diameter increasing twice to approximately 7 nm. DLarge appears to be built up from an assembly of cubosomic domains, which may coexist with an amphiphilic lamellae domain at low temperatures. The chemical stimulus concentration can be selected as to tune the hydration of the nanochannels in the DLarge phase and its transformation into a DNormal phase at temperatures above the body temperature. Two-dimensional SANS images recorded upon heating scan reveal growth of spontaneously oriented domains of single-crystal cubic nature. Phase separation and squeezing out the guest-hydrating agent from the higher-curvature regions of the amphiphilic bilayer suggest a possible mechanism for the established transformations. The order-order structural transition, cubic DLarge-cubic DNormal, is found to be reversible upon cooling. The obtained results put forward a structure-based concept for release of encapsulated guest molecules from stimuli-responsive and self-regulated cubosomic nanocarriers.     

Tensile tests of polypropylene monitored by SAXS. Comparing the stretch‐hold technique to the dynamic technique

Advanced instrumentation at synchrotron beamlines facilitates considerable reduction of the exposure required for the recording of low‐noise small‐angle X‐ray scattering (SAXS) patterns. Concerning the monitoring of tensile tests on polymer materials by SAXS means that change‐over from the stretch‐hold technique to more practical dynamic straining is possible, although the strain rate is still by a factor of 100 lower than that relevant in industry and service. As hard‐elastic polypropylene (PP) is tested, considerably different scattering patterns are recorded after switching to the dynamic technique. Even though during exposure the elongation is no longer constant when applying the dynamic technique, the images collected in stretch‐hold technique appear much more blurred. The observed immediate relaxation of nanostructure induced by stopping the extensometer is analyzed by means of the multidimensional chord distribution function (CDF): The extension of the crystalline lamellae is increasing. Their thicknesses are becoming non‐uniform. The range of order is shortening. Cross‐hatched lamellae are formed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 721–726, 2008     

Effect of substitution of Ce on superconducting properties of Bi1.7Pb0.3Sr2Ca2−x Ce x Cu3O10+δ system

We have investigated the superconducting properties of the Bi_1.7 Pb_0.3Sr₂Ca_2−xCe _x Cu₃O_10+δ system with x=0.00, 0.02, 0.04, 0.08 and 0.1 by X-ray diffraction and magnetic susceptibility. The substitution of Ce for Ca has been found to drastically change the superconducting properties of the system. X-ray diffraction studies on these compounds indicate decrease in the c-parameter with increased substitution of Ce at Ca site and volume fraction of high T _c (2 : 2 : 2 : 3) phase decreases and low T _c phase increases. The magnetic susceptibility of this compound shows that the diamagnetic on set superconducting transition temperature (onset) varies from 109 K to 51 K for x=0.00, 0.02, 0.04, 0.08 and 0.1. These results suggest the possible existence of Ce in a tetravalent state rather than a trivalent state in this system; that is, Ca²⁺ → Ce⁴⁺ replacement changes the hole carrier concentration. Hole filling is the cause of lowering T _c of the system.     

Constant and variable returns to scale DEA models for socially responsible investment funds

In order to evaluate the performance of socially responsible investment (SRI) funds, we propose some models which use data envelopment analysis (DEA) and can be computed in all phases of the business cycle. These models focus on the most crucial elements of an investment in mutual funds.     

THE HADAMARD INEQUALITY FOR CONVEX FUNCTION VIA FRACTIONAL INTEGRALS

In this paper, we establish several inequalities for some differantiable mappings that are connected with the Riemann-Liouville fractional integrals. The analysis used in the proofs is fairly elementar...     

Influence of ceramide on the internal structure and hydration of the phospholipid bilayer studied by neutron and X-ray scattering

Small angle neutron scattering (SANS), neutron diffraction and X-ray powder diffraction were used to investigate influence of N-stearoyl phytosphingosine (CER[NP]) and α-hydroxy-N-stearoyl phytosphingosine (CER[AP]) on the internal structure and hydration of DMPC membrane in fully and partly hydrated states at T = 30 °C. Application of Fourier analysis for diffraction data and model calculations for the SANS data evidence that addition of both CER[NP] and CER[AP] in small concentrations promotes significant changes in the organization of DMPC bilayers, such as the increase of the hydrophobic core region. SANS data evidence a decrease in the average radius and polydispersity of the vesicles that can be ascribed to hydrogen bonds interactions that favor tight lipid packing with a compact, more rigid character.     

Nano- and femtosecond UV laser pulses to immobilize biomolecules onto surfaces with preferential orientation

By relying on the photonic immobilization technique of antibodies onto surfaces, we realized portable biosensors for light molecules based on the use of quartz crystal microbalances, given the linear dependence of the method on the laser pulse intensity. Here, we compare the quality of the anchoring method when using nanosecond (260 nm, 25 mJ/pulse, 5 ns, 10 Hz rep. rate) and femtosecond (258 nm, 25 μJ/pulse, 150 fs, 10 kHz rep. rate) laser source, delivering the same energy to the sample with the same average power. As a reference, we also tethered untreated antibodies by means of the passive adsorption. The results are striking: When the antibodies are irradiated with the femtosecond pulses, the deposition on the gold plate is much more ordered than in the other two cases. The effects of UV pulses irradiation onto the antibodies are also analyzed by measuring absorption and fluorescence and suggest the occurrence of remarkable degradation when nanosecond pulses are used likely induced by a larger thermal coupling. In view of the high average power required to activate the antibodies for the achievement of the photonic immobilization technique, we conclude that femtosecond rather than nanosecond laser pulses have to be used.     

Online SAXS investigations of polymeric hollow fibre membranes

Polymeric membranes are used in industrial and analytical separation techniques. In this study small-angle X-ray scattering (SAXS) with synchrotron radiation has been applied for in-situ characterisation during formation of polymeric membranes. The spinning of a polyetherimide (PEI) hollow fibre membrane was chosen for investigation of dynamic aggregation processes during membrane formation, because it allows the measurement of the dynamic equilibrium at different distances from the spinning nozzle. With this system it is possible to resolve structural changes in the nm-size range which occur during membrane formation on the time-scale of milliseconds. Integral structural parameters, like radius of gyration and pair-distance distribution, were determined. Depending on the chosen spinning parameters, e.g. the flow ratio between polymer solution and coagulant water, significant changes in the scattering curves have been observed. The data are correlated with the distance from the spinning nozzle in order to get information about the kinetics of membrane formation which has fundamental influence on structure and properties of the membrane.     

Self-supported particle-track-etched polycarbonate membranes as templates for cylindrical polypyrrole nanotubes and nanowires: an X-ray scattering and scanning force microscopy investigation

Self-supported particle-track-etched polycarbonate membranes with nearly perfect cylindrical pores are used for the preparation of similarly perfect cylindrical polypyrrole nanowires and nanotubes. A complete investigation of the structural properties that result at different stages of the preparation route of polypyrrole nanowires and nanotubes is based on a combination of real and reciprocal space techniques. Nanoporous membranes with nominal pore size ranging from 5 to 150 nm and pore density up to 10(9) pores/cm(2) made from 21-microm-thick polycarbonate films are used. Polypyrrole nanotubes or nanowires are synthesized inside the pores. A real-space picture of the nanomaterial results from scanning force microscopy (SFM) on ultrathin sections made in two directions to obtain structures in the sample surface as well as perpendicular to the surface. From a model-based fit to the small-angle and ultra-small-angle X-ray scattering (SAXS/USAXS) data, the geometric pore structure is obtained and compared to values determined with scanning electron microscopy (SEM). Nanopores, nanowires, and nanotubes are described by uniform solid cylinders or hollow tubes, which are oriented highly parallel to each other and exhibit a small size distribution. Below a critical pore diameter, solid nanowires are produced whereas above this limit hollow nanotubes result.     

Interaction of gemini surfactants butane-1,4-diyl-bis(alkyldimethylammonium bromide) with DNA

The size and structure of aggregates formed by interaction of DNA with homologous series of cationic gemini surfactants butane-1,4-diyl-bis(alkyldimethylammonium bromide) (CnGS, n=10-16 is the number of alkyl carbons) were investigated using UV-vis turbidity, dynamic light scattering and small-angle synchrotron X-ray (SAX) diffraction. The detailed analysis of turbidity in the range of lambda=450-600 nm indicates an anomaly in the growth of CnGS+DNA aggregates with increasing concentration of CnGS, possibly involving changes of structure and size of aggregates. Using dynamic light scattering, changes of the effective diameter of CnGS+DNA (n=12 and 16) aggregates formed in the CnGS concentration range 0.002-0.140 mmol/l were observed. SAX diffractograms show the presence of long-range organization of CnGS+DNA (n=12, 13, 14 and 16) aggregates due to DNA interaction with CnGS above the critical micellar concentration. The CnGS+DNA (n=12, 13 and 14) aggregates at 25 degrees C are packed in a lattice of two-dimensional hexagonal symmetry. With increasing C14GS:DNA molar ratio the changes of the lattice parameter in the range of 4.80-5.27 nm are observed at 25 degrees C. The aggregates undergo structural changes induced by temperature in the range 60-95 degrees C, which are accompanied by changes of the diffraction patterns, namely in the region of reciprocal spacing s=0.15-0.30 nm(-1).