Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Search for a standard model Higgs boson in the H→ZZ→ℓ(+)ℓ(-)νν decay channel with the ATLAS detector

A search for a heavy standard model Higgs boson decaying via H→ZZ→→?(+)?(-)νν, where ?=e, μ, is presented. It is based on proton-proton collision data at √s=7 TeV, collected by the ATLAS experiment at the LHC in the first half of 2011 and corresponding to an integrated luminosity of 1.04 fb(-1). The data are compared to the expected standard model backgrounds. The data and the background expectations are found to be in agreement and upper limits are placed on the Higgs boson production cross section over the entire mass window considered; in particular, the production of a standard model Higgs boson is excluded in the region 340相似文献   

Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

A light-emitting diode fabricated from horse-heart cytochrome c

We have fabricated a light-emitting diode from horse-heart cytochrome c and measured the electro-luminescence (EL) spectra. The spectra exhibit broad peaks around 530 and 690 nm, and a weak shoulder around 410 nm. The EL spectra are completely different from the photo-luminescence spectra previously reported. The appearance of the 690 nm emission band suggests the charge-transfer between the iron and the axial methionine ligand plays a crucial role in the electrical conduction in the cytochrome c film.     

Emission characteristics of debris from CO<Subscript>2</Subscript> and Nd:YAG laser-produced tin plasmas for extreme ultraviolet lithography light source

We describe a comparative study of the emission characteristics of debris from CO₂ and Nd:YAG laser-produced tin plasmas for developing an extreme-ultraviolet (EUV) lithography light source. Tin (Sn) ions and droplets emitted from a Sn plasma produced by a CO₂ laser or an Nd:YAG laser were detected using Faraday cups and quartz crystal microbalance (QCM) detectors, respectively. The droplets were also monitored by using silicon substrates as witness plates. The results showed higher ion kinetic energy and lower particle emission for the CO₂ laser than the Nd:YAG laser for the same laser energy (50 mJ). The average ion energy was 2.2 keV for the CO₂ laser-produced plasma (LPP), and 0.6 keV for the Nd:YAG LPP. The debris accumulation of the CO₂ LPP detected by the QCM detectors, however, was less than one fourth of that of the Nd:YAG LPP for the same laser energy. Using ion energy data, the mirror lifetime is estimated for the CO₂ and Nd:YAG lasers. In both cases, the upper limit of the number of shots was of the order of 10⁶. PACS  52.38.DX; 52.38.Ph; 52.38.Mf     

Cepaic acid, a novel yellow xanthylium pigment from the dried outer scales of the yellow onion Allium cepa

Cepaic acid was isolated as a novel xanthylium yellow pigment from the dried outer scales of the yellow onion Allium cepa Linne. Its structure was elucidated on the basis of ESI-MS and 2D NMR spectroscopy as a 9-carboxy-1,3,6,8-tetrahydroxyxanthylium, which suggests that cepaic acid and other yellow pigments in the dried outer skin of onion were formed by the nucleophilic reaction of phloroglucinol derived from quercetin, a flavonol in onion scales, by autoxidation to glyoxylic acid. To our knowledge, this is the first report of such a pigment in yellow onion.     

On the Sherk plane

In this paper, we characterize the Sherk plane as the only non-semifield translation plane of order 27 that admits an abelian group of order 27 in the translation complement.     

Graphs G for which both G and G¯ are Contraction Critically k-Connected

 An edge of a k-connected graph is said to be k-contractible if the contraction of the edge results in a k-connected graph. A k-connected graph with no k-contractible edge is called contraction critically k-connected. For k≥4, we prove that if both G and its complement Gˉ are contraction critically k-connected, then |V(G)|<k ^5/3+4k ^3/2. Received: October, 2001 Final version received: September 18, 2002 AMS Classification: 05C40     

Path chromatic numbers of graphs

Let the finite, simple, undirected graph G = (V(G), E(G)) be vertex-colored. Denote the distinct colors by 1,2,…,c. Let V_i be the set of all vertices colored j and let <V_i be the subgraph of G induced by V_i. The k-path chromatic number of G, denoted by χ(G; P_k), is the least number c of distinct colors with which V(G) can be colored such that each connected component of V_i is a path of order at most k, 1 ? i ? c. We obtain upper bounds for χ(G; P_k) and χ(G; P_∞) for regular, planar, and outerplanar graphs.