Fluorescence determination of N-acetylaspartic acid in the rat cerebrum homogenate using high-performance liquid chromatography with pre-column fluorescence derivatization

N-acetyl-L-aspartic acid (NAA) is an endogenous compound, and its brain concentration is suggested to be altered in neurological disorders. In the present study, a fluorescence determination method for NAA was developed by employing reversed-phase high-performance liquid chromatography (HPLC) with pre-column fluorescence derivatization using 4-N,N-dimethylaminosulfonyl-7-N-(2-aminoethyl)amino-2,1,3-benzoxadiazole (DBD-ED). Using methylsuccinic acid as the internal standard, a linear calibration curve for NAA was constructed in the range 125-1000 microM (n=3). The detection limit on the column was approximately 5.0 fmol (signal-to-noise ratio 3). The proposed HPLC method was applied to determine NAA in the rat cerebrum homogenate. Cerebrum NAA was successfully determined using 10 microL of the homogenate, and the validation data for the proposed HPLC method demonstrated satisfactory results. Intra- and inter-day precision and accuracy were within 1.1-7.0 and -8.1-6.3%, respectively. The concentration of NAA in the male rat cerebrum (13 weeks old) was 84+/-4.6 micromol/mg protein (n=3).     

Quantitative comparison of a corona-charged aerosol detector and an evaporative light-scattering detector for the analysis of a synthetic polymer by supercritical fluid chromatography

A corona-charged aerosol detector (CAD) was developed to improve the sensitivity, reproducibility and quantitativeness of detection as compared to evaporative light-scattering detector (ELSD) for liquid chromatography. Our laboratory used the corona CAD as a detector for supercritical fluid chromatography (SFC) and evaluated its performance compared to the ELSD by using a certified reference material of poly(ethylene glycol) (PEG) and a well-defined equimass mixture of uniform PEG oligomers. The corona CAD was able to detect a 10 times more dilute solution of uniform oligomers compared to the ELSD. Although the original data of molecular mass by ELSD was 4.6% smaller than the certified value of PEG 1000, molecular mass distribution obtained by corona CAD was virtually almost the same as the certified value without any calibrations.     

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.     

Amphiphilic molecular design as a rational strategy for tailoring bicontinuous electron donor and acceptor arrays: photoconductive liquid crystalline oligothiophene--C60 dyads

For tailoring solution-processable optoelectronic thin films, a rational strategy with amphiphilic molecular design is proposed. A donor-acceptor dyad consisting of an oligothiophene and C60, when modified with a hydrophilic wedge on one side and a paraffinic wedge on the other (1Amphi), forms over a wide temperature range a photoconducting smectic A liquid crystal having bicontinuous arrays of densely packed donor and acceptor units. In contrast, when modified with only paraffinic wedges (1Lipo), the dyad forms a smectic A liquid crystalline mesophase, which however is poorly conductive. As indicated by an absorption spectral feature along with a synchrotron radiation small-angle X-ray scattering profile, 1Lipo in the lamellar structure does not adopt a uniform head/tail orientation. Such defective donor and acceptor arrays likely contain a large number of trapping sites, leading to short-lived charge carriers, as observed by a flash photolysis time-resolved microwave conductivity study.     

Patterning reactive microdomains inside polydimethylsiloxane microchannels by trapping and melting functional polymer particles

This paper describes a facile technique to pattern reactive microdomains inside polydimethylsiloxane microchannels by utilizing polymer particles as the carrier of functional groups. The air/liquid interface formed in microchannels equipped with microwells exerts lateral force on the particles, trapping particles only inside the wells. We then fix the polymer matrix on the wells by melting the trapped particles to form reactive domains with flexible shapes and high resolution. We employed monodisperse poly(styrene-co-glycidyl methacrylate) microparticles having an epoxy group and patterned various types of microdomains with a resolution of several micrometers. Several tests confirmed the presence of the epoxy group and the flatness of the patterned domain. The presented scheme provides a new way of preparing highly functional microsystems by using simple operations and would be useful for various applications, including local patterning of graft polymers and the site-specific cultivation of cells in a confined space.     

Selection principle for various modes of spatially nonuniform electrochemical oscillations

The pattern selection principle for various modes of spatially nonuniform oscillation was investigated by taking a current oscillation of negative differential resistance type, appearing in H2O2 reduction on platinum (Pt) ring electrodes, as a model system. In experiments, various modes of spatiotemporal oscillation, such as a spatially uniform oscillation, standing wave oscillation, and rotating wave oscillation, appeared depending on the applied potential and the distance between the Pt-ring electrode and the reference electrode. A simple mathematical model for the spatiotemporal patterns at the electrode surface was proposed. Numerical calculations and nonlinear bifurcation analysis based on the proposed model reproduced all the essential features of the experimental results and clarified the pattern selection principle.     

Total synthesis of valeriananoids A, B, and C via autocatalytic diastereoselective domino Michael reaction

Natural enantiomers of unique tricyclic sesquiterpenoids, valeriananoids A-C 1-3, have been synthesized starting from bicyclo[2.2.2]octane-2,5-dione derivative 11, which was obtained by diastereoselective catalytic domino Michael reaction of oxophorone 5 with 8-phenylmenthyl acrylate 10 by LDA or silica-gel-base (NMAP-Li). The tricyclic ring was closed selectively by intramolecular 6-endo-trig mode cyclization of the ketyl radical, which was generated from keto-allylether 25 by either lithium or sodium naphthalenide.     

Determination of kynurenine levels in rat plasma by high-performance liquid chromatography with pre-column fluorescence derivatization

Kynurenine (KYN), a tryptophan metabolite, is a crucial compound for modulating neurotransmission because it can be metabolized in vivo into both quinolinic acid and kynurenic acid, which are the agonist and antagonist, respectively, of N-methyl-d-aspartate receptor. For the highly sensitive detection of KYN by high-performance liquid chromatography (HPLC), a fluorescence derivatization of KYN with a benzofurazan-type fluorogenic reagent, 4-N,N-dimethylaminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (DBD-F) was investigated in the present study. KYN was derivatized with DBD-F (DBD-KYN) at 60 °C for 30 min, and separated on an octadecylsilica column with a gradient elution of the mobile phase, which consists of 0.1% formic acid in acetonitrile/methanol/water. DBD-KYN was detected fluorimetrically at 553 nm with an excitation wavelength of 431 nm. The limits of detection and quantification were approximately 0.30 pmol [signal-to-noise ratio (S/N) 3] and 1.0 pmol (S/N, 10) on column, respectively. Plasma KYN levels were successfully determined using 10 μL of rat plasma with satisfactory precision and accuracy. Intra- and inter-day precisions and accuracies were 1.7-6.8%, and −10 to 9.6%, respectively. KYN levels in plasma of male Sprague-Dawley rats (7 weeks old) were approximately 2.4 ± 0.32 μmol L⁻¹ (n = 4). The proposed HPLC method was applied to determine KYN levels in the plasma of ketamine-treated rats—the animal model of schizophrenia.     

Testing Parallel Variable Transformation

This paper studies performance of the parallel variable transformation (PVT) algorithm for unconstrained nonlinear optimization through numerical experiments on a Fujitsu VPP500, one of the most up-to-date vector parallel computers. Special attention is paid to a particular form of the PVT algorithm that is regarded as a generalization of the block Jacobi algorithm that allows overlapping of variables among processors. Implementation strategies on the VPP500 are described in detail and results of numerical experiments are reported.