New taxane derivatives: synthesis of baccatin[14,1-d]furan-2-one nucleus and its condensation with the norstatine side chain

New taxanes 15 and 18, containing the unsaturated and saturated baccatin[14,1-d]furan-2-one nucleus, respectively, were prepared starting from the readily available 13-oxo-7-Tes-baccatin III (3). Sequential formation of the enolate of 3 and reaction with ethyl glyoxylate gave the 13-oxo-7-Tes-baccatin[14,1-d]-3,4-dehydrofuran-2-one 4. The reduction of 4 can result in the formation of a mixture of compounds corresponding to 13-hydroxy alcohol 5 and 13-enol derivative 6. Both 5 and 6 were transformed into 13-oxo-7-Tes-baccatin[14,1-d]furan-2-one 8 by treatment with a base. Further reduction of 8 gave 13-hydroxy compound 9. Esterification of 6 and 9 with N,O-protected norstatine 12, followed by deprotection, gave the new promising anticancer taxanes 15 and 18, respectively.     

Assembly of a supramolecular capsule on a molecular printboard

A molecular capsule based on ionic interactions between two oppositely charged calix[4]arenes, 1 and 2, was assembled both in solution and on a surface. In solution, the formation of the equimolar assembly 1.2 was studied by (1)H NMR, ESI-MS, and isothermal titration calorimetry, giving an association constant (K(a)) of 7.5 x 10(5) M(-1). A beta-cyclodextrin self-assembled monolayer (beta-CD SAM) on gold was used as a molecular printboard to anchor the tetraguanidinium calix[4]arene (2). The binding of tetrasulfonate calix[4]arene 1 was monitored by surface plasmon resonance spectroscopy. Rinsing of the surface with a high ionic strength aqueous solution allows the removal of the tetrasulfonate calix[4]arene (1), while by rinsing with 2-propanol it is possible to achieve the complete desorption of the tetraguanidinium calix[4]arene (2) from the beta-CD SAM. The K(a) for the capsule formation on a surface is 3.5 x 10(6) M(-1), thus comparing well with the K(a) determined in solution.     

Selective synthesis of 14β-amino taxanes

The base induced deprotonation of H-14 of 7-triethylsilyl- (7-TES-) and 7-tert-butoxycarbonyl- (7-BOC-) protected 13-oxo-baccatins gave the corresponding enolates, which were selectively aminated with electrophilic nitrogen donors, such as azodicarboxylates and tosyl azide. In particular, tosyl azide gave the corresponding 7-BOC- and 7-TES-13-oxo-14β-azido-baccatin III. Alternatively, the last compound was prepared via NaN₃ induced azidation of the 13-silyl enol ether of 7-TES-13-oxo-baccatin III under oxidative (cerium ammonium nitrate) conditions. The 13-silyl enol ether was obtained in a multistep process by DBU induced silylation of 7-TES-13-oxo-baccatin III. The 7-TES-13-oxo-14β-azido-baccatin III was used as a key intermediate for the synthesis of a new family of antitumour taxanes containing amino based functional groups at the C-14 position, such as: 14β-azido, 14β-amino, 14β-amino 1, 14-carbamate, 14β-amino 1, 14-thiocarbamate, and 14β-amino N-tert-butoxycarbonyl-1,14-carbamate.     

Synthesis of trimethylammoniumphenylthio-substituted phthalocyanines with different pattern of substitution

The base-catalyzed cyclotetramerization of 3-, 4- and 4,5-dimethylaminophenylthio phthalonitriles with zinc(II)acetate afforded 1(4),8(11),15(18),22(25)- and 2(3),9(10),16(17),23(24)-tetrasubstituted and 2,3,9,10,16,17,23,24-octasubstituted Zn(II)phthalocyanines, respectively. The statistical mixed condensation of the same phthalonitriles with 1,2-dicyanobenzene gave the corresponding mono- and disubstituted derivatives. Methylation of such products afforded a series of cationic Zn(II)phthalocyanines with different pattern of substitution, with potential use as photodynamic agents in microbial infections.     

Synthesis and NMR characterization of 3,4′-dibutoxy-2,2′-bithiophene

3,4′-Dibromo-2,2′-bithiophene was converted, in high yield, into the corresponding dibutoxy derivative. The ¹H ¹³C and nmr data are discussed in comparison with those of 3,3′- and 4,4′-dibutoxy-2,2′-bithiophene in relation to regiochemistry.     

Total syntheses of hyacinthacine A2 and 7-deoxycasuarine by cycloaddition to a carbohydrate derived nitrone

Practical syntheses of nitrone 8 by two different approaches from sugars are reported. Its use as a versatile intermediate in highly selective 1,3-dipolar cycloaddition reactions constitutes the key step for novel total syntheses of hyacinthacine A₂ (3) and 7-deoxycasuarine (20) by simple transformations of a common isoxazolidine adduct.     

Atropisomerism in 1,5-bridged calix[8]arenes

[structure: see text] The first example of two discrete calix[8]arene conformational isomers, 2 and 2a, has been obtained by exhaustive benzylation of 1,5-tetramethylene-bridged calix[8]arene 1. It is demonstrated, with the aid of X-ray crystallography, that these atropisomers have two 3/4-cone halves oriented syn or anti with respect to the bridge/bridgeheads moiety. VT NMR studies indicate that the tert-butyl-through-the-annulus inversion is inhibited in 1, while groups larger than n-hexyl or benzyl are required for curtailing the O-through-the-annulus route.     

High-performance liquid chromatographic determination of FCE 24928, a new aromatase inhibitor, in human plasma

A sensitive and selective high-performance liquid chromatographic method for the determination of FCE 24928 (4-amino-androsta-1,4,6-triene-3, 17-dione) in human plasma is reported. The drug was extracted from buffered (pH = 8) plasma samples with methylene chloride-isooctane, then analysed by reversed-phase liquid chromatography. Quantitation was achieved by ultraviolet detection of the eluate at 238 nm. Blank plasma samples from humans, dog and rat assayed as described showed no significant peak at the retention time of the compound of interest. The suitability of the method for in vivo samples was tested by measuring the plasma levels of FCE 24928 in rats that received oral doses of the test compound.     

Low oxidation state ruthenium chemistry : IV. The reactions of M(CO)2(PPh3)3 complexes (M = Fe,Ru) and the hydrogenation and isomerization of alkenes catalyzed by RuL(CO)2(PPh3)2 (L = H2, PPh3)

The complexes M(CO)₂(PPh₃)₃ (I, M = Fe; II, M = Ru) readily react with H₂ at room temperature and atmospheric pressure to give cis-M(H)₂(CO)₂(PPh₃)₂ (III, M = Fe;IV,M = Ru). I reacts with O₂ to give an unstable compound in solution, in a type of reaction known to occur with II which leads to cis-Ru(O₂)(CO)₂(PPh₃)₂(V). Even compound IV reacts with O₂ to give V with displacement of H₂; this reaction has been shown to be reversible and this is the first case where the displacement of H₂ by O₂ and that of O₂ by H₂ at a metal center has been observed. III and IV are reduced to M(CO)₃(PPh₃)₂ by CO with displacement of H₂; Ru(CO)₃- (PPh₃)₂ is also formed by treatment of IV with CO₂, but under higher pressure. Compounds II and IV react with CH₂CHCN to give Ru(CH₂CHCN)(CO)₂- (PPh₃)₂(VI) which reacts with H₂ to reform the hydride IV.cis-Ru(H)₂(CO)₂(PPh₃)₂(IV) has been studied as catalyst in the hydrogenation and isomerization of a series of monoenes and dienes. The catalysts are poisoned by the presence of free triphenylphosphine. On the other hand the ready exchange of H₂ and O₂ on the “Ru(CO)₂(PPh₃)₂” moiety makes IV a catalyst not irreversibly poisoned by the presence of air. It has been found that even Ru(CO)₂(PPh₃)₃(II) acts as a catalyst for the isomerization of hex-1-ene at room temperature under an inert atmosphere.     

Hydration process of cement in the presence of a cellulosic additive. A calorimetric investigation

In the cement industry, the extrusion technique is used to produce flat shapes with improved resistance to compression. Extrusion is a plastic-forming process that consists of forcing a highly viscous plastic mixture through a shaped die. The material should be fluid enough to be mixed and to pass through the die, and on the other hand, the extruded specimen should be stiff enough to be handled without changing in shape or cracking. These characteristics are industrially obtained by adding cellulosic polymers to the mixture. The aim of this work is to understand the action mechanism of these additives on the major pure phases constituting a typical Portland cement: tricalcium silicate (C(3)S), dicalcium silicate (C(2)S), tricalcium aluminate (C(3)A), and tetracalcium iron-aluminate (C(4)AF). In particular, a methylhydroxyethyl cellulose (MHEC) was selected from the best-performing polymers for further study. The effect of this additive on the hydration kinetics (rate constants, activation energies, and diffusional constants) was evaluated by means of differential scanning calorimetry (DSC) while the hydration products were studied by using thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). MHEC addition in calcium silicate pastes produces an increase in the induction time without affecting the nucleation-and-growth period. A less dense CSH gel was deduced from the diffusional constants in the presence of MHEC. Moreover, CSH laminar features and poorly structured hydrates were noted during the first hours of hydration. In the case of the aluminous phases, the additive inhibits the growth of stable cubic hydrated phases (C(3)AH(6)), with the advantage of the metastable hexagonal phases being formed in the earliest minutes of hydration.