Advantages of atmospheric pressure photoionization mass spectrometry in support of drug discovery

The performance of the atmospheric pressure photoionization (APPI) technique was evaluated against five sets of standards and drug-like compounds and compared to atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI). The APPI technique was first used to analyze a set of 86 drug standards with diverse structures and polarities with a 100% detection rate. More detailed studies were then performed for another three sets of both drug standards and proprietary drug candidates. All 60 test compounds in these three sets were detected by APPI with an overall higher ionization efficiency than either APCI or ESI. Most of the non-polar compounds in these three sets were not ionized by APCI or ESI. Analysis of a final set of 201 Wyeth proprietary drug candidates by APPI, APCI and ESI provided an additional comparison of the ionization techniques. The detection rates in positive ion mode were 94% for APPI, 84% for APCI, and 84% for ESI. Combining positive and negative ion mode detection, APPI detected 98% of the compounds, while APCI and ESI detected 91%, respectively. This analysis shows that APPI is a valuable tool for day-to-day usage in a pharmaceutical company setting because it is able to successfully ionize more compounds, with greater structural diversity, than the other two ionization techniques. Consequently, APPI could be considered a more universal ionization method, and therefore has great potential in high-throughput drug discovery especially for open access liquid chromatography/mass spectrometry (LC/MS) applications.     

Functionalized mesoporous silica films as a matrix for anchoring electrochemically active guests

Mesoporous silica thin films were shown to be an appropriate matrix for immobilization of discrete electroactive moieties, yielding uniform transparent thin film electrodes with defined texture and enhanced electrochemical activity. The mesoporous silica films prepared on conducting FTO-coated glass substrate were postsynthetically functionalized. Alkoxysilanes were used as precursors for subsequent grafting via ionic or covalent bonds of representative electroactive species, such as polyoxometalate PMo12O(40)3-, hexacyanoferrate(III), and ferrocene. The electrochemically active concentration within the silica-based composite electrodes achieves 90, 260, and 60 micromol cm(-3) for polyoxometalate, hexacyanoferrate(III), and ferrocene, respectively. The amount of molecules involved in the charge-transfer sequence is proportional to the film thickness and comparable to the total amount of embedded guests. Thus, eventually the whole bulk volume of the modified silica films is electrochemically accessible. Immobilization in the chemically modified silica matrix alters the redox potential of the electroactive molecules. Electron exchange between the adjacent redox centers (electron hopping) is proposed as a possible charge propagation pathway through the insulating silica matrix, which is supported by the fact that the high charge uptake is observed also for the hybrid electrodes with the covalently anchored redox guests.     

Ce10Cl4Ga5 and Ln3ClGa4 (Ln = La,Ce): reduced halides or oxidized intermetallics?

The compounds Ce(10)Cl(4)Ga(5) and Ln(3)ClGa(4) (Ln = La, Ce) were synthesized from stoichiometric mixtures of Ln, LnCl(3), and Ga under Ar atmosphere in sealed Ta ampules at 910-1020 degrees C for 25-26 days. Ce(10)Cl(4)Ga(5) is isostructural to La(10)Cl(4)Ga(5) (space group I4/mcm, No. 140) with lattice constants a = 7.9546(11) A, c = 31.793(6) A. Ln(3)ClGa(4) represents a new structural type, also in the space group I4/mcm, with a = 8.1955(8) and 8.1123(11) A, c = 11.363(2) and 11.229(2) A, respectively, for Ln = La and Ce. Ce(10)Cl(4)Ga(5) features building blocks of Ga-centered Ce(6) trigonal prisms and distinctive two-dimensional intermetallic CuAl(2) and U(3)Si(2) type nets. Its electronic structure falls within the realm of reduced rare-earth halides. Ln(3)ClGa(4) also contains the intermetallic CuAl(2) type nets, but the interstitials are inverted: The building blocks are Cl-centered Ln(6) octahedra. Its electronic structure is characterized by strong peripheral Ln-Ga bonding stabilizing the Ln(6)Cl octahedron which normally would have its Ln-Ln antibonding orbitals filled with electrons from interstitials beyond chalcogen. Magnetic susceptibility and conductivity measurements confirm the metallic nature of all three compounds.     

Non-quadratic-intensity dependence of two-photon absorption induced fluorescence of organic chromophores in solution

We have provided a model to interpret the non-quadratic-intensity dependence behavior commonly observed in the two-photon fluorescence (TPF) experiment excited with high laser intensity. The model also provides one with a different technique to measure the two-photon absorption cross section of an organic chromophore in solution. In contrast to the commonly used low intensity technique that depends on the quadratic-intensity law, the present technique is based on the non-quadratic-intensity dependence of two-photon fluorescence. Auxiliary data such as two-photon quantum efficiency and fluorescence collection efficiency, essential in the low intensity method, are not required in the present technique. TPF measurements of Rhodamine B in methanol are carried out to demonstrate the validity of the present method. The method is used to determine the two-photon absorption cross section of a new chromophore attached with tricyano-derivatized furan as the electron acceptor. The two-photon absorption cross section measured using this method is also compared with that using a conventional transmission technique.     

The electrooxidation of methanol and related compounds at ruthenium dioxide-coated electrodes

The underlying metal was observed to corrode when a ruthenium dioxide-coated titanium electrode was anodized in an aqueous methanol solution. With a similarly coated platinum electrode peaks were observed on the voltammogram below 1.0 V which were attributed to methanol oxidation on the underlying metal. This effect was more pronounced when the electrode was subjected during cycling to potentials close to 0 V. Rapid oxidation of methanol on RuO₂ was observed at potentials above 1.0 V, the rate at a given potential increasing in an approximately linear manner with increasing alcohol concentration. The rate of reaction also increased with increasing temperature and increasing surface roughness. Tafel slope values were rather high (>100 mV decade^?1) and a mechanism involving anodically generated species such as OH_ads was proposed to account for these results. The variation of activity with pH was similar to that reported earlier for oxygen evolution at these anodes and this was again explained in terms of partial deactivation of the surface due to a combination of proton loss and phosphate ion adsorption at intermediate pH values. The release of carbon dioxide from aqueous solutions of higher alcohols at 25°C confirmed the high oxidizing power of RuO₂ anodes.     

Cyclic Heptapeptides Axinastatin 2, 3, and 4: Conformational analysis and evaluation of the biological potential

The conformational analysis of naturally occurring cytostatic cyclic heptapeptides axinastatin 2, 3, and 4 was carried out by two-dimensional NMR spectroscopy in combination with distance-geometry (DG) and molecular-dynamics (MD) calculations in explicit solvents. The synthesized secondary metabolites were examined in (D₆)DMSO. Axinastatin 2 was also investigated in CD₃OH. In all structures, Pro² is in the i + 1 position of a βI turn and Pro⁶ occupies the i + 2 position of a βVIa turn about the cis amide bond between residue 5 and Pro^6. In all peptides, a bifurcated H-bond occurs between residue 4 CO and the amide protons of residue 1 and 7. For axinastatin 2 and 3, an Asn I_g turn was found about Asn¹ and Pro^2. We compared these structures with conformations of cyclic heptapeptides obtained by X-ray and NMR studies. A β-bulge motif with two β turns and one bifurcated H-bond is found as the dominating backbone conformation of cyclic all-L-heptapeptides. Axinastatin 2, 3, and 4 can be characterized by six trans and one cis amide bond resulting in a β/βVI(a)-turn motif, a conformation found for many cyclic heptapeptides. Detailed biological tests of the synthetic compounds in different human cancer cell lines indicates these axinastatins to be inactive or of low activity.