Growth of vertically aligned carbon nanotubes on carbon fiber: thermal and electrochemical treatments

Composite electrodes of vertically aligned carbon nanotubes (VACNT) were synthesized on carbon fiber (CF) substrate by pyrolysis of camphor/ferrocene using a SiO₂ interlayer as a barrier against metal diffusion into the substrate. Two treatments were used to remove iron from CF/VACNT structure: thermal annealing at high temperature under inert atmosphere and electrochemical oxidation in H₂SO₄ solution. The composites were characterized by scanning electron microscopy and Raman scattering spectroscopy. Besides, the electrochemical behavior of CF/VACNT was analyzed by cyclic voltammetry and charge/discharge tests. CF/VACNT composite submitted to the electrochemical oxidation showed the best electrochemical performance, with high specific capacitance, which makes it very attractive as electrode for supercapacitors.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Shear‐induced lamellar phase of an ionic liquid crystal at room temperature

The phase behaviour of a number of N‐alkylimidazolium salts was studied using polarizing optical microscopy, differential scanning calorimetry and X‐ray diffraction. Two of these compounds exhibit lamellar mesophases at temperatures above 50°C. In these systems, the liquid crystalline behaviour may be induced at room temperature by shear. Sheared films of these materials, observed between crossed polarisers, have a morphology that is typical of (wet) liquid foams: they partition into dark domains separated by brighter (birefringent) walls, which are approximately arcs of circle and meet at “Plateau borders” with three or more sides. Where walls meet three at a time, they do so at approximately 120° angles. These patterns coarsen with time and both T1 and T2 processes have been observed, as in foams. The time evolution of domains is also consistent with von Neumann's law. We conjecture that the bright walls are regions of high concentration of defects produced by shear, and that the system is dominated by the interfacial tension between these walls and the uniform domains. The control of self‐organised monodomains, as observed in these systems, is expected to play an important role in potential applications.     

Affinity Matrices of Cratylia mollis Seed Lectins for Isolation of Glycoproteins from Complex Protein Mixtures

This work reports the use of matrices containing Cratylia mollis lectins (Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose) for isolation of glycoproteins from fetal bovine serum, human colostrum, hen egg white, and human blood plasma. Cramoll 1,2,3-Sepharose was able to bind a glycoprotein from fetal bovine serum which showed the same fetuin electrophoretic profile. The data indicate that this protein adsorbed to the matrix by interaction with Cramoll 3. Cramoll 1,2,3-Sepharose was not efficient to retain glycoproteins from human colostrum or commercial ovalbumin. Cramoll 3-Sepharose bound ovalbumin, and the support retained protein from hen egg white. Protein peaks eluted from the column with 1.0 M NaCl or 0.3 M galactose showed apparent molecular mass of ovalbumin. Two main proteins from blood plasma with apparent molecular mass 67 (similar to albumin) and 50 kDa (similar to fetuin) adsorbed on Cramoll 3-Sepharose and were eluted with 1.0 M NaCl as a single peak. Elution of adsorbed plasma proteins with 0.3 M galactose was less selective than with 1.0 M NaCl as revealed by SDS-PAGE. In conclusion, the Cramoll 1,2,3-Sepharose and Cramoll 3-Sepharose matrices were useful to separate glycoproteins from complex protein mixtures, and the adsorption phenomena was a carbohydrate-dependent event.     

Total and inorganic mercury determination in fish tissue by flow injection cold vapour atomic fluorescence spectrometry

A simple and reliable method for Hg determination in fish samples has been developed. Lyophilised fish tissue samples were extracted in a 25% (w/v) tetramethylammonium hydroxide (TMAH) solution; the extracts were then analysed by FI-CVAFS. This method can be used to determine total and inorganic Hg, using the same FI manifold. For total Hg determination, a 0.1% (w/v) KMnO₄ solution was added to the FI manifold at the sample zone, followed by the addition of a 0.5% (w/v) SnCl₂ solution, whereas inorganic Hg was determined by adding a 0.1% (w/v) L-cysteine solution followed by a 1.0% (w/v) SnCl₂ solution to the FI system. The organic fraction was determined as the difference between total and inorganic Hg. Sample preparation, reagent consumption and parameters that can influence the FI-CVAFS performance were also evaluated. The limit of detection for this method is 3.7 ng g^?1 for total Hg and 4.3 ng g^?1 for inorganic Hg. The relative standard deviation for a 1.0 µg L^?1 CH₃Hg standard solution (n = 20) was 1.1%, and 1.3% for a 1.0 µg L^–1 Hg²⁺ standard solution (n = 20). Accuracy was assessed by the analysis of Certified Reference Material (dogfish: DORM-2, NRCC). Recoveries of 99.1% for total Hg and 93.9% inorganic Hg were obtained. Mercury losses were not observed when sample solutions were re-analysed after a seven day period of storage at 4°C.     

Cloud point extraction for the determination of cadmium and lead employing sequential multi-element flame atomic absorption spectrometry

A cloud point extraction procedure for pre-concentration and determination of cadmium and lead in drinking water using sequential multi-element flame atomic absorption spectrometry is described. 4-(2-thiazolylazo)-orcinol (TAO) has been used as complexing agent and the micellar phase was obtained using the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114) and centrifugation. The conditions for reaction and extraction (surfactant concentration, reagent concentration, effect of incubation time, etc) were studied and the analytical characteristics of the method were determined. The method allows the determination of cadmium and lead with quantification limits of 0.30?µg?L^?1 and 2.6?µg?L^?1, respectively. A precision expressed as relative standard deviation (RSD, n?=?10) of 2.3% and 2.6% has been obtained for cadmium concentrations of 10?µg?L^?1 and 30?µg?L^?1, respectively, and RSD of 1.3% and 1.7% for lead concentrations of 10?µg?L^?1 and 30?µg?L^?1, respectively. The accuracy was confirmed by analysis of a natural water certified reference material. The method has been applied for the determination of cadmium and lead in drinking water samples collected in the cities of Ilhéus and Itabuna, Brazil. Recovery tests have also been performed for some samples, and results varied from 96 to 105% for cadmium and 97 to 106% for lead. The cadmium and lead concentrations found in these samples were always lower than the permissible maximum levels stipulated by World Health Organization and the Brazilian Government.     

The effects of lignin removal and drying on the porosity and enzymatic hydrolysis of sugarcane bagasse

The porosity of lignocellulosic materials is a key feature for the enzymatic hydrolysis of the constituent polysaccharides, being affected by its drying and lignin content. Here we evaluated the influence of both parameters in the porosity of sugarcane bagasse, using raw and chlorite-delignified samples. A fraction of these samples was air dried at room temperature and the remainder one was kept wet. All the samples were subjected to porometry (solute exclusion technique), determination of water retention value and assessment of enzymatic saccharification of polysaccharides. Samples with higher lignin contents had lower porosities and exhibited worse enzymatic conversions of polysaccharides. Mild drying collapsed only the smaller pores, which already were inaccessible to enzymes, and therefore did not affect the efficiencies of saccharification. Our results show that the lignin content plays an important role in the porosity of the material and that its removal improves the enzymatic saccharification of the constituent polysaccharides.     

Ultrasound-assisted addition of alcohols to N-acyliminium ions mediated by In(OTf)3 and synthesis of 1,2,3-triazoles

An easy and mild approach using ultrasound-assisted reaction addition of alcohols to N-acyliminium ion mediated by Lewis acid, In(OTf)₃, allowed the synthesis of ether pyrrolidinones; next, the products were converted to 1,2,3-triazoles using click chemistry reaction conditions. The products in both reactions were afforded in moderate to good yields.     

A green-emitting α-substituted β-diketonate Tb3+ phosphor for ultraviolet LED-based solid-state lighting

The α-substituted β-diketonate [Ln(3Cl-acac)₃(H₂O)₂] [Ln = Tb, Gd] complexes (with 3Cl-acac^– being 3-chloro-2,4-pentanedionate) were characterized by elemental analysis, infrared, ultraviolet (UV)-visible and photoluminescence spectroscopies. For comparison purposes regarding photoluminescence, the well-known [Tb(acac)₃(H₂O)₂] complex was also synthesized. By considering the phosphorescence spectra of [Gd(3Cl-acac)₃(H₂O)₂], the effect of chloride replacement of hydrogen on the triplet state energy of the 3Cl-acac ligand was revealed. To support the interpretation and rationalization of the experimental results, Time-dependent DFT calculations were performed on Tb(3Cl-acac)₃(H₂O)₂. Additionally, the possibility of Tb(3Cl-acac)₃(H₂O)₂ to be used as potential green-emitting phosphor material for solid-sate light emitting diodes was evaluated. A prototype was successfully fabricated coating a near-UV LED (370 nm) with the Tb(3Cl-acac)₃(H₂O)₂ complex.