Derivative spectrophotometric determination of nickel using Br-PADAP

A major problem with spectrophotometric methods for nickel is cobalt interference, because many of the reagents for nickel also react with cobalt. In this work, the interference of cobalt in the determination of nickel using 2-(5-bromo-2-pyridylaxo)-5-diethylaminophenol (Br-PADAP) was eliminated by the use of derivative spectrophotometry, using the zero-crossing method for evaluation of the derivative signal. Br-PADAP reacts with nickel(II) in the presence of Triton X-100 to form a red complex with absorption maxima at 530 and 562 nm. The reactions parameters and the conditions for the measurements of the first-derivative signal were studied and the results demonstrated that using the derivative technique, Br-PADAP can be used for nickel determination with a selectivity higher than that of ordinary spectrophotometry and with a limit of detection of 0.2 ng ml(-1). The pH should be in the range 5.0-6.0 using an acetate buffer. The determination of nickel in the presence of cobalt was performed with conventional and derivative procedures, and the results demonstrated that only the derivative method should be used and, of the methods used for evaluation of the derivative signal, the zero-crossing method is the best. The proposed procedure was used for nickel determination in steels standards. The results demonstrated that the procedure has satisfactory accuracy and precision. Cobalt interference can be also eliminated by using dual-wave-length spectroscopy.     

Temperature-induced gelation of concentrated silicon carbide suspensions

Due to the steric barrier provided by the adsorption of the dispersant hypermer KD1 (a polyester/polyamine condensation polymer), stable and low-viscosity suspensions of SiC, Y(2)O(3), and Al(2)O(3) powder mixtures could be prepared in methyl ethyl ketone (MEK)/ethanol (E) solvent with solids loading as high as 60 vol%. The solvency of the dispersant in MEK/E decreased dramatically on cooling. Steady shear viscosity and oscillatory measurements were performed as a function of temperature for suspensions with different solids loading. The viscosity and elastic modulus of suspension increased with decreasing temperature and became more sensitive with the increase of solids loading. The suspensions with solids loading higher than 40 vol% could be solidified with decreasing temperature, but gelation temperature and gelation stiffness decreased with decreasing solids loading. The 60 vol% solid-loaded suspension was a stable and free-flowing fluid at 20 degrees C and gradually transformed to a very highly viscous and elastic system upon cooling to about 13 degrees C. Complete solidification occurred when the temperature was decreased to 5 degrees C. The gelation mechanism was mainly based on the collapse of the adsorbed layer as the temperature decreases, which induced incipient flocculation and formed a stiff network. The gelled body was further strengthened by separation of the dispersant from the suspension.     

Density of states due to donor-pair molecules in three- and two-dimensional semiconductor systems

The density of states is calculated for a random distribution of donor-pairs of hydrogenlike impurities in three- and two-dimensional systems. Recent investigations of the hydrogen molecule in the alternant–molecular–orbital approximation are here extended. We found that the lowest excited state ¹Σu (i.e., H⁺H^?), which is optically connected to the ground state, plays a relevant role in the absorption spectra of semiconductor systems.     

Frequent analytical/experimental problems in lipase-mediated synthesis in solvent-free systems and how to avoid them

Compared with chemical catalysis, enzymatic catalysis is a relatively new topic. Experimental work involving lipases deserves careful attention and accurate procedures still need to be implemented. A rapid but careful survey of published data immediately demonstrates that experiments performed under similar conditions with similar reagents have led to very different results. The aim of this work is to point out the importance of accurate and systematic procedures in order to ensure the reproducibility of experimental data. We strongly believe that different results found by different labs are due to problems detected in the procedures used. Quantification of the immobilisation efficiency of lipase on several supports through UV/visible methods and sampling methods used to obtain correct enzymatic activity values are specifically analysed. After a brief review which demonstrates the big discrepancies found in the literature, original data from Candida rugosa lipase adsorption on polypropylene powder and its use in the solvent-free synthesis of ethyl oleate are introduced in order to exemplify the difficulties found in these kinds of systems. Several procedures described in the literature are assayed and the accuracy of the results obtained is carefully analysed. The aim of the whole analysis performed is that it would be useful for any powdered solid to be used as a support for a lipase in a solvent-free system for any synthesis reaction, especially for those involving a volatile reagent. Throughout this contribution, special emphasis is placed on how catalytic reaction results using enzymes (free and immobilised) are reported so as to allow comparison between published data, something which is usually difficult since very different units are used and often complementary data are not included.     

Quassinoids from Picrasma crenata

From woods of Picrasma crenata, a new stereoisomer dihydronorneoquassin was obtained together with others well knowns dihydronorneoquassin, parain, alpha-neoquassin, beta-neoquassin and quassin. The structures were determined by spectroscopic data and chemical evidence.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Use of modified rice husks as a natural solid adsorbent of trace metals: characterisation and development of an on-line preconcentration system for cadmium and lead determination by FAAS

The use of rice husks as an alternative adsorbent in an on-line preconcentration system for Cd (II) and Pb (II) determination by flame atomic absorption spectrometry (FAAS) is described. The potential of rice husks as a natural adsorbent was evaluated as a material modified with 0.75 mol l⁻¹ NaOH solution and in the unmodified form. For this task, several techniques such as spectroscopy and thermogravimetry were used for elucidation of possible functional groups responsible for the uptake of Cd (II) and Pb (II). Furthermore, based on adsorption studies and adsorption isotherms applied to the Langmüir model, it was possible to verify that modified rice husks present a higher adsorption capacity for both metals. After establishing this material as a promising natural adsorbent, it was used for on-line preconcentration of Cd (II) and Pb (II) metals. The multivariate optimisation of chemical and flow variables was performed by using a full factorial design (2⁴) including the following factors: preconcentration time, preconcentration flow rate, concentration and volume of eluent. The optimum pH values used for on-line preconcentration were taken from prior univariate experiments. Under optimised conditions for Cd (II) determination (4 min of preconcentration at a 6 ml min⁻¹ preconcentration flow rate, in which comprises 24 ml of preconcentration volume, 200 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent), the system achieved a detection limit of 1.14 μg l⁻¹ and an enrichment factor of 72.4. Similar conditions were used for Pb (II) determination (4 min of preconcentration, 6 ml min⁻¹ preconcentration flow rate, 300 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent) from which a detection limit of 14.1 μg l⁻¹ and enrichment factor of 46.0 were achieved. Also, rice husks have been shown to be a homogeneous and stable adsorbent in which more than 100 preconcentration/elution cycles provide a relative standard deviation (RSD) of less than 6.0% on the analytical signal. The satisfactory accuracy of the method developed was obtained by using spiked water samples (mineral water and lake water) and spiked red wine samples. These values were confirmed by electrothermal atomic absorption spectrometry (ETAAS). The certified reference material [pig kidney (CRM 186)] and the reference material [beech leaves (CRM 100)] were also used.     

Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

On the inexact scaled gradient projection method

Computational Optimization and Applications - The purpose of this paper is to present an inexact version of the scaled gradient projection method on a convex set, which is inexact in two sense....