Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

金属表面生成氧化膜在电解质中的电位

测量金属表面生成氧化膜在电解质中的电位时,金属/氧化膜/电解质/参比电极构成了多电极体系,其中包括3个电池,由3个电池之间的关系、电池过程中所有的电化学反应、电荷传输步骤和化学反应步骤,导出电位的普遍适用的公式: E=E_a⁰+sum from s=1 to 3|η_t,s|-1/(ne)v₇ΔG₇, E=E_c⁰-sum from s=4 to 6|η_t,s|+1/(ne)v₈ΔG₈.当金属/氧化膜/电解质电池受到不同的步骤控制时,可以得到不同的简化公式.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

InAs/GaAs自组织量子点的DLTS谱

将DLTS用于对InAs/GaAsQD结构样品的测量,测定了QD能级发射载流子的热激活能;获得了QD能级俘获电子过程伴随有多声子发射(MPE)、QD能级存在一定程度的展宽、以及在某些特定的生长条件下,存在亚稳生长构形的实验证据.结果表明:DLTS在QD体系的研究中有其特有的功能     

短脉冲载荷下金属材料的层裂破坏

 本文用点炮加载聚酯薄膜飞片撞击金属靶材料，飞片速度0.714~2.24 km/s，脉冲宽度40~80 ns，击靶压力为2.280~11.952 GPa。在回收的铝、铜和钢靶样品上观察到层裂现象。通过金相分析发现它们的破坏方式与在一般较长脉冲加载下的破坏方式相似，铝和铜以延性方式破坏；钢则以脆性方式破坏。一维和二维数值模拟结果表明通常的几种层裂判据在这个应力、应变和应变率范围内也基本上适用。     

一种新的$1/f$过程小波模型

给出了一种新的二进小波1/f过程模型,从理论上证明了一类谱指数为H的近似1/f过程可通过一簇平稳随机过程产生.由于所提方法利用了1/f过程小波系数的相关性,因而有效地减少了合成1/f过程的谱误差.数值实验结果表明,新模型很好地改进了已有模型.     

基于矩阵初等变换的n元函数极值的快速判别法

给出了 n元函数极值的一个充分条件 ,并结合矩阵的初等变换建立了 n元函数极值的一种快速判别法 ,最后给出了一个例子     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

On Two Parallel Matched Gratings Demodulation Method of Fiber Grating Strain Sensor

The method of demodulation with two parallel matched fiber Bragg gratings( FBGs)system is introduced to enlarge the range of strain that can be detected by the FBG sensor system.     

On the structure of stationary sets

We isolate several classes of stationary sets of [k]ωand investigate implications among them. Under a large cardinal assumption, we prove a structure theorem for stationary sets.