High‐Loading Nano‐SnO2 Encapsulated in situ in Three‐Dimensional Rigid Porous Carbon for Superior Lithium‐Ion Batteries

Tin oxide nanoparticles (SnO₂ NPs) have been encapsulated in situ in a three‐dimensional ordered space structure. Within this composite, ordered mesoporous carbon (OMC) acts as a carbon framework showing a desirable ordered mesoporous structure with an average pore size (≈6 nm) and a high surface area (470.3 m² g^?1), and the SnO₂ NPs (≈10 nm) are highly loaded (up to 80 wt %) and homogeneously distributed within the OMC matrix. As an anode material for lithium‐ion batteries, a SnO₂@OMC composite material can deliver an initial charge capacity of 943 mAh g^?1 and retain 68.9 % of the initial capacity after 50 cycles at a current density of 50 mA g^?1, even exhibit a capacity of 503 mA h g^?1 after 100 cycles at 160 mA g^?1. In situ encapsulation of the SnO₂ NPs within an OMC framework contributes to a higher capacity and a better cycling stability and rate capability in comparison with bare OMC and OMC ex situ loaded with SnO₂ particles (SnO₂/OMC). The significantly improved electrochemical performance of the SnO₂@OMC composite can be attributed to the multifunctional OMC matrix, which can facilitate electrolyte infiltration, accelerate charge transfer, and lithium‐ion diffusion, and act as a favorable buffer to release reaction strains for lithiation/delithiation of the SnO₂ NPs.     

Adsorption of SO2 and chlorobenzene on activated carbon

Activated carbon is very effective for simultaneous removal of multiple pollutants. The adsorption of SO₂ and chlorobenzene modeling of VOCs on activated carbon was investigated in a fixed-bed reactor by four kinds of activated carbon. The results show that the SO₂ adsorption is affected by the BET surface and basic functional groups as C=O and π–π* groups of the carbon, while the chlorobenzene adsorption is strongly affected by the carbon pore structure, with the micropore volume deciding the adsorption amount and larger pores increasing the adsorption rate. The chlorobenzene adsorption is little affected by the chemical properties of activated carbon as the O/C ratio detected by XPS. The effect of SO₂ on the chlorobenzene adsorption was investigated, with the results showing the SO₂ seriously restricts the individual chlorobenzene adsorption and this effect becomes smaller in the presence of O₂. The adsorption products were analyzed by TPD-MS and the initial decomposition temperatures are 380 K for chlorobenzene and 500 K for SO₂, showing that SO₂ is much more stable adsorbed than chlorobenzene. The changes of the carbon functional groups that the CO₂ desorption peak emerges at 700 K and decreases at 1000 K with the chlorobenzene adsorption, were observed by TPD-MS, indicating that the lactone and quinone groups on the carbon are likely to combine with the chlorobenzene and form weakly chemisorbed chlorobenzene.     

UPLC-ELSD Determination of 1-Octacosanol in Raw Material and Health Products

Determination of the levels of 1-octacosanol is important in food stuff for the study of its pharmacological activities and health benefits. In this study, a novel, simple and fast internal standard method for the non-derivatization ultra-performance liquid chromatographic determination of 1-octacosanol in raw materials and health products was developed and validated based on evaporative light scattering detection. The linearity (r ² > 0.998), recovery (99.1–100.2%, RSD <2.7%), intra- and inter-day precision (RSD <3.8%), limit of detection (1.0 mg/L), limit of quantification (2.2 mg/L) of the 1-octacosanol were determined. The method was successfully applied to nine real 1-octacosanol products. The results of analyses had close agreement with the labeled claims of 1-octacosanol content in these products. Compared with the classical gas chromatography method, the developed method was simpler, faster and more environmentally friendly due to avoiding any derivatization step. This protocol represents a rapid and feasible method for quality control of 1-octacosanol products.

     

Polyoxometalate-Based Nanomaterials Toward Efficient Cancer Diagnosis and Therapy

As an emerging class of inorganic metal oxides, organically functionalized polyoxometalates (POMs) or POM-based nanohybrids have been demonstrated promising potential for the inhibition of various cancer types by the virtue of their diversity in structures and significantly reduced toxicity. This contribution summarizes the latest achievement of POM-based nanomaterials in cancer diagnosis and various therapeutics to put forward our fundamental viewpoints on the design principles of modified POMs based on their application. In addition, major challenges and perspectives in this field are also discussed. We expect that this review will provide a valuable and systematic reference for the further development of POM-based nanomaterials.     

Application of EDXRF Method in Measurement of Fe Content in Aqueous Fe Sample

介绍了能量色散X荧光分析方法在含水Fe样品测量中的应用.用ANTG -2000型海底X荧光探测系统对含Fe为10％～60％的Fe样进行测量,建立水分对Fe元素特征K α射线影响的校正模型.结果表明,通过该模型校正,对含饱和水情况下Fe样品的分析相对误差小于4％,具有良好的分析效果.     

Room-temperature ferromagnetism in pure ZnO nanoflowers

ZnO nanoflowers are synthesized by hydrothermal method. The morphology of ZnO is captured by SEM, TEM and HRTEM, which is composed of closely packed nanorods of about 100 nm in diameter and 1 μm in length. The ZFC/FC curves show superparamagnetic features. The abnormal increase in magnetization curves below 14 K comes from the isolated vacancy clusters with no interaction. The magnetic hysteresis at 300 K displays saturation state and confirms room-temperature ferromagnetism. While the magnetic hysteresis at 5 K shows nonsaturation state due to the enhanced effects of vacancy clusters. The O 1s XPS results can be fitted to three Gaussian peaks. The existence of medium-binding energy located at 531.16 eV confirms the deficiency of O ions at the surface of ZnO nanoflowers.     

Effect of the luminol signal enhancer on the chemiluminescence intensity and kinetics

The novel p-phenol derivatives, 4-(1-imidazolyl)-phenol, 4-hydroxybiphenyl, 4-hydroxy-4′-iodobiphenyl were employed as highly potent signal enhancers of luminol-hydrogen peroxide (H₂O₂)-horseradish peroxidase (HRP) chemiluminescence (CL) system. The CL reaction conditions were optimized, and the enhancement characteristics of these enhancers were compared with each other. The employment of these molecules greatly affected important assay parameters. Practically, the use of a novel enhancer, even a slightly change of the structure (or concentration) of 4-substituted phenol derivative, could affect assay properties quite dramatically. Furthermore, the use of different enhancers in the luminol–H₂O₂–HRP system can affect not only the intensity of the CL signal, which is well known, but also its kinetics. The experiment data indicated that the stronger intensity was combined with a more rapid decrease of the CL signal.