Synthesis and Raman analysis of 1D-ZnO nanostructure via vapor phase growth

1D-nanostructural zinc oxide (ZnO) with different shapes have been synthesized on p-type Si(1 0 0) and glass substrates via vapor phase growth by heating pure zinc powder at temperatures between 480 and 570 °C. The different ZnO nanostructures depend on the substrates and the growth temperatures. Scanning electron microscopy and X-ray diffraction revealed that a well-aligned nanowires array, which are vertical to the substrate of Si(1 0 0) with 18 sides on their heads, but six sides on their stems, has been formed at 480 °C. Raman study on the ZnO nanostructures shows that the coupling strength between electron and phonon determined by the ratio of the second- to the first-order Raman scattering cross-sections declines with decreasing diameter of the nanowires. However, a little changes of the coupling strength in terms of the width of the nanobelts have been observed.     

Diphenylmethane transformations over boron trifluoride modified alumina and silica-alumina

Transformations of diphenylmethane were investigated in a flow system in the presence of alumina and silica-alumina modified with boron trifluoride at atmospheric pressure and elevated temperatures. Hydrogen transfer reaction was observed on addition of tetralin to the substrate stream. This revised version was published online in August 2006 with corrections to the Cover Date.     

Surface free energies of electroless Ni–P based composite coatings

Surface free energy of a solid surface gives a direct measure of intermolecular interactions at interfaces and has a strong influence on adsorption and adhesion behaviour. However few data are available for the surface free energies of electroless Ni–P based composition coatings. In this paper, the electroless Ni–P, Ni–P-surfactant, Ni–Cu–P, Ni–P–PTFE and Ni–Cu–P–PTFE composite coatings were prepared under various coating conditions. The chemical compositions, surface morphology and thickness of the coatings were measured using an energy dispersive X-ray microanalysis (EDX), a scanning electron microscope (SEM) and a digital micrometer respectively. The contact angles of water, diiodomethane and ethylene glycol on the coatings were measured automatically using dataphysics OCA-20 contact angle analyser. The surface free energy of the coatings and their components (e.g. dispersion, polar or acid/base portions) were calculated using various methods. The experimental results showed that the incorporation of surfactant or PTFE particles into Ni–P matrixes has a significant influence on the surface free energy of the coatings, while the incorporation of copper into Ni–P matrixes has no significant influence on the surface free energy of the coatings.     

Torsional vibration of multi-step non-uniform rods with various concentrated elements

An analytical approach and exact solutions for the torsional vibration of a multi-step non-uniform rod carrying an arbitrary number of concentrated elements such as rigid disks and with classical or non-classical boundary conditions is presented. The exact solutions for the free torsional vibration of non-uniform rods whose variations of cross-section are described by exponential functions and power functions are obtained. Then, the exact solutions for more general cases, non-uniform rods with arbitrary cross-section, are derived for the first time. In order to simplify the analysis for the title problem, the fundamental solutions and recurrence formulas are developed. The advantage of the proposed method is that the resulting frequency equation for torsional vibration of multi-step non-uniform rods with arbitrary number of concentrated elements can be conveniently determined from a homogeneous algebraic equation. As a consequence, the computational time required by the proposed method can be reduced significantly as compared with previously developed analytical procedures. A numerical example shows that the results obtained from the proposed method are in good agreement with those determined from the finite element method (FEM), but the proposed method takes less computational time than FEM, illustrating the present methods are efficient, convenient and accurate.     

Near-Optimal Controls of Discrete-Time Dynamic Systems Driven by Singularly-Perturbed Markov Chains

This work is devoted to near-optimal controls of large-scale discrete-time nonlinear dynamic systems driven by Markov chains; the underlying problem is to minimize an expected cost function. Our main goal is to reduce the complexity of the underlying systems. To achieve this goal, discrete-time control models under singularly-perturbed Markov chains are introduced. Using a relaxed control representation, our effort is devoted to finding near-optimal controls. Lumping the states in each irreducible class into a single state gives rise to a limit system. Applying near-optimal controls of the limit system to the original system, near-optimal controls of the original system are derived.     

Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

 Numerical studies were conducted to investigate the natural convection heat transfer around a uniformly heated thin plate with arbitrary inclination in an infinite space. The numerical approach was based on the finite volume technique with a nonstaggered grid arrangement. For handling the pressure–velocity coupling the SIMPLE-algorithm was used. QUICK scheme and first order upwind scheme were employed for discretization of the momentum and energy convective terms respectively. Plate width and heating rate were used to vary the modified Rayleigh number over the range of 4.8×10⁶ to 1.87×10⁸. Local and average heat transfer characteristics were compared with regarding to the inclination angle. The empirical expressions for local and average Nusselt number were correlated. It has been found that for inclination angle less than 10^∘, the flow and heat transfer characteristics are complicated and the average Nusselt number can not be correlated by one equation while for inclination angle larger than 10^∘, the average Nusselt number can be correlated into an elegant correlation. Received on 18 April 2001 / Published online: 29 November 2001     

Sufficient optimality conditions and duality in vector optimization with invex-convexlike functions

We prove the Kuhn-Tucker sufficient optimality condition, the Wolfe duality, and a modified Mond-Weir duality for vector optimization problems involving various types of invex-convexlike functions. The class of such functins contains many known generalized convex functions. As applications, we demonstrate that, under invex-convexlikeness assumptions, the Pontryagin maximum principle is a sufficient optimality condition for cooperative differential games. The Wolfe duality is established for these games.The author is indebted to the referees and Professor W. Stadler for valuable remarks and comments, which have been used to revise considerably the paper.