Simultaneous micellar liquid chromatographic analysis of seven water-soluble vitamins: optimization using super-modified simplex

A super-modified simplex (SMS) method has been used to optimize the mobile phase used for separation of seven water-soluble vitamins in multivitamin tablets by gradient micellar liquid chromatography (MLC) with ultraviolet (UV) detection at 254, 295, and 361 nm. Effect of column temperature and addition of organic modifier to the mobile phase on separation efficiency were investigated: the appropriate conditions used were a temperature of 35 degrees C and 1-butanol modifier. The sodium dodecyl sulfate (SDS) concentration, pH, and 1-butanol% in the mobile phase were chosen for simultaneous optimization using the SMS method. The optimum mobile phase was found to be 16 mmol L(-1) (mM) SDS, 0.02 M phosphate buffer, pH 3.6, and a gradient of 3.5-10% (v/v) butanol. The total analysis time for vitamins was 75 min. The analytical parameters including linearity ( r>0.9970), limit of detection (0.12-50 micro g mL(-1)), precision of method (relative standard deviation (RSD) <8.90%), and accuracy obtained by the recovery assay (88-103%) support the usefulness of the proposed method for the determination of the water-soluble vitamins.     

Radiation field modeling of multi-lamp, homogeneous photoreactors

For modeling and optimization of photoreactors, knowing radiation distribution inside the reactor is essential because the kinetics of photochemical and photocatalytic reactions are strongly dependent on the local incident radiation. In this work, a Monte Carlo multi-lamp radiation model is proposed. The model takes into account the reflection on the surface of the lamps, the refraction in the quartz lamp envelope, as well as the adsorption and the isotropic re-emission of radiation in the mercury vapor of the lamp. To quantify the shadowing effect among the lamps, the effective transmittance through a UV-lamp turned on, a lamp turned off, and a lamp quartz envelope have been measured. For validation purposes, experimental measurements have been performed using one, two, and three lamps. The model predictions show good agreement with the experimental results. Finally, in order to simplify the numerical solution of the model, the validity of assuming the lamps 100% opaque and 100% transparent have been analyzed.     

Extraction of crocin from saffron (Crocus sativus) using molecularly imprinted polymer solid‐phase extraction

A new molecularly imprinted polymer for extraction of crocin from saffron stigmas was prepared using gentiobiose (a glycoside moiety in crocin structure) as a template. Crocin binding to gentiobiose imprinted polymer (Gent‐MIP) was studied in comparison with a blank nonimprinted polymer in aqueous media. Affinity of the Gent‐MIP for the crocin was more than the nonimprinted polymer at all concentrations. In Scatchard analysis, the number of binding sites in each gram of polymer (maximum binding sites) and dissociation constant of crocin to binding sites were 18.4 μmol/g polymer and 11.2 μM, respectively. The Gent‐MIP was then used as the sorbent in an SPE method for isolation and purification of crocin from methanolic extract of saffron stigmas. The recovery of crocin, safranal and picrocrocin was determined in washing and elution steps. The Gent‐MIP had significantly higher affinity for crocin than other compounds and enabled selective extraction of crocin with a high recovery (84%) from a complex mixture. The results demonstrated the possibility of using a part of a big molecule in preparing a molecularly imprinted polymer with a good selectivity for the main structure.     

Vocal fold bulging effects on phonation using a biophysical computer model

Glottal adduction is a primary laryngeal variable that helps to determine glottal configuration and phonatory output. Greater adduction of the vocal folds can be produced by narrowing the gap between the vocal processes or by bulging the medial surface of the vocal folds. This study examined phonatory effects due to changing the degree of bulging using a computational model. Bulging was modeled as a quadratic surface and was related to active muscle stress. Results indicated that bulging had a significant effect on glottal flow resistance, maximum glottal width and area, and mean glottal volume velocity. The results are discussed relative to clinical issues of hyperfunction.     

Performance study of the multiwavelet discontinuous Galerkin approach for solving the Green-Naghdi equations

This paper presents a multiresolution discontinuous Galerkin (DG) scheme for the adaptive solution of Boussinesq-type equations. The model combines multiwavelet (MW)–based grid adaptation with a DG solver based on the system of fully nonlinear and weakly dispersive Green-Naghdi (GN) equations. The key feature of the adaptation procedure is to conduct a multiresolution analysis using MWs on a hierarchy of nested grids to improve the efficiency of the reference DG scheme on a uniform grid by computing on a locally refined adapted grid. This way, the local resolution level will be determined by manipulating MW coefficients controlled by a single user-defined threshold value. The proposed adaptive multiwavelet DG solver for GN equations is assessed using several benchmark problems related to wave propagation and transformation in nearshore areas. The numerical results demonstrate that the proposed scheme retains the accuracy of the reference scheme, while significantly reducing the computational cost.     

Pulsed Nd:YAG passive Q-switched laser using Cr4+:YAG crystal

In this paper, we report the experimental results of a pulsed flash lamp Nd:YAG laser at wavelength of 1064 nm and Q-switched by Cr⁴⁺:YAG solid state saturable absorber. We have obtained the output energy (E) and pulse- width (τ_p) of this laser for various initial transmissions of this saturable absorber. Furthermore, the effect of reflectivity of the output coupler (R), diameter of the rod (d), and optical length of the cavity (l) on this laser output data have been investigated. We have used the corner cube as a back mirror, which shows high laser stability and better brightness. We have obtained pulse-width 15 ns with 31 mJ output energy. We have also analyzed this laser theoretically and analytically, which agrees well with our corresponding experimental results.     

Free vibration of composite plates with mixed boundary conditions based on higher-order shear deformation theory

A global higher-order shear deformation theory is devised to obtain the governing equations of composite plates under dynamic excitation. The time-harmonic solution leads to an eigenvalue problem for the natural frequencies of plates. The eigenvalue problem for rectangular plates is converted to a set of homogenous algebraic equations using differential quadrature method. The formulation of the problem allows direct application of various boundary conditions. Therefore, rectangular plates with mixed boundary conditions are also considered. To show the validity of results, the fundamental natural frequencies of composite plates with different boundary conditions and those of isotropic plates with mixed boundary conditions are compared against the results available in the literature.