Synthesis of 5′‐O‐(2‐Azido‐2‐deoxy‐α‐D‐glycosyl)nucleosides and Their Antitumor Activities

The 1,3,4,6‐tetra‐O‐acetyl‐2‐azido‐2‐deoxy‐β‐D ‐mannopyranose ( 4 ) or the mixture of 1,3,6‐tri‐O‐acetyl‐2‐azido‐2‐deoxy‐4‐O‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐galactopyranosyl)‐β‐D ‐mannopyranose ( 10 ) and the corresponding α‐D ‐glucopyranose‐type glycosyl donor 9 / 10 reacted at room temperature with protected nucleosides 12 – 15 in CH₂Cl₂ solution in the presence of BF₃?OEt₂ as promoter to give 5′‐O‐(2‐azido‐2‐deoxy‐α‐D ‐glycosyl)nucleosides in reasonable yields (Schemes 2 and 3). Only the 5′‐O‐(α‐D ‐mannopyranosyl)nucleosides were obtained. Compounds 21, 28, 30 , and 31 showed growth inhibition of HeLa cells and hepatoma Bel‐7402 cells at a concentration of 10 μM in vitro.     

CH2(X 3B1)自由基与O2的反应

用时间分辨富里叶红外发射谱仪（ＴＲ－ＦＴＩＲＳ）研究了ＣＨ２（Ｘ＾３Ｂ１）自由基与Ｏ２反应的通道及产物的振动动态布居，基电子态自由基ＣＨ２（Ｘ＾３Ｂ１）由３５１ｎｍ紫外激光光解ＣＨ２ＣＯ生成，观测到振动发态反应产物ＣＯ（ｖ≤１０），ＣＯ２（ｖ３≤７）ＯＨ（Ｈ２Ｏ）和Ｈ２ＣＯ的红外发射，证实存在生成Ｈ２ＣＯ的通道，由光谱拟合得到不同时刻ＣＯ（ｖ）和ＣＯ２（ｖ３）的相对振动布居，发现ｖ＝４能级的布居数     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Two New Diterpenoids from Callicarpa pedunculata

Two new diterpenoids, pedunculatic acid A (= (4R,5α,7α)‐7‐ethoxy‐9β,13β‐dioxyabiet‐8(14)‐en‐18‐oic acid; 1 ) and pedunculatic acid B (= (4S,5α,12β)‐8β,14β‐epoxy‐12‐hydroxy‐11‐oxototaran‐19‐oic acid; 2 ), together with three known sesquiterpenoids, were isolated from the Chinese medicinal herb Callicarpa pedunculata R. Brown . Their structures were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR, and by high‐resolution mass spectrometry.     

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption.The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased byalkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Non-equilibrium determination of metoclopramide and tetracaine hydrochloride by sequential injection spectrophotometry

A new sequential injection spectrophotometric method was proposed for the determination of metoclopramide and tetracaine hydrochloride. The method was based on the detection of an unstable red intermediate compound resulting from the reaction of metoclopramide or tetracaine hydrochloride with potassium dichromate, in the presence of sodium oxalate, in sulfuric acid solution. The related reaction mechanisms of this new method have been studied. The experimental conditions were optimized for the stopped-flow and continuous-flow sequential injection models. For continuous flow, the linear range for determination of metoclopramide, the detection limit and the sampling frequency were 13-130 μg ml⁻¹, 9.4 μg ml⁻¹ and 40 samples per hour, respectively. For stopped flow, they were 3-42 μg ml⁻¹, 1.0 μg ml⁻¹ and 18 h⁻¹, respectively. Adopting the continuous-flow model for tetracaine hydrochloride, the linear range was 25-300 μg ml⁻¹, and the detection limit was 18.0 μg ml⁻¹ with sampling frequency of 40 h⁻¹. This method has been used to determine metoclopramide and tetracaine hydrochloride in pharmaceutical preparations, and the results are compared with those determined by the pharmacopoeia method. Statistical analysis reveals that there was no evidence of significant difference between the methods.     

The growth of perylene on Ru(0001)

The structure of perylene adsorbed on Ru(0001) surface has been studied by ultraviolet photoemission spectroscopy (UPS) and low-energy electron diffraction. An ordered p(4x4) structure is observed from a monolayer (about 4 A thickness) of the perylene on Ru(0001) surface. UPS measurements show the molecular features, from the perylene multiplayer, between 2 and 10 eV below the Fermi level. Angle-resolved ultraviolet photoemission spectroscopy measurements suggest that the perylene molecular plane is parallel to the substrate. Temperature dependent UPS measurements show that the perylene multilayer is stable on Ru(0001) surface up to 125 degrees C. The desorption of the multilayer and the decomposition of the monolayer are observed above 125 degrees C.     

Polyethylene with bimodal molecular weight distribution synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) activated with various activators

Polyethylenes with bimodal molecular weight distribution (MWD) were synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) combined with different activators, which were prepared from alkylaluminium. It is found that the molecular weight (MW) and MWD was influenced by not only iron complexes but activators as well. The activator plays key important role in determination of the MW and MWD of final polymer and the MWD shape could be regulated by selection of various activators and polymerization conditions. The study on the variation of the MWD with the polymerization time and fitting of bimodal MWD with two Flory distributions suggests that bimodal MWD is caused by chain transfer reaction to activator or two active sites.     

Evaluation of Transient Absorption Spectra of N, N, N, N- Tetra - ( p -methylphenyl ) - 4, 4- diamino - 1, 1- diphenyl Ether ( TPDAE ) for Electron Transfer from TPDAE to Fullerenes ( C_(60) / C_(70) ) by Laser Flash Photolysis

Fullerenes C60 and C70 have high electron affinity ( 2.6 - 2.8 ev ) and readily form anions on electronchemical reduction1, which were famous as electron acceptor in photo-excitation because of symmetrical shape, large size, and properties of its p - electron system2. After observation of molecular ferromagnetism3 in the tetrakis (dimethylamino ) ethylene salt of C60 as well as the occurrence of ultra-fast photoinduced electron transfer within the dimethyl aniline - C60 complex4, prompted us…