Extending Petri net to reduce control strategies of railway interlocking system

In our previous articles we gave step by step refinement process towards the development of safety properties of moving block interlocking system (MBRIS). The refinement process started from abstraction to fuzzy based safety properties using Z and then fuzzy multi agent specification language. However, one dimensional control of train passing through a switch and level crossing were not discussed. This paper reduces the existing two dimensional controls along the switch and level crossing to one dimensional for shifting it to a train only. For example, in the existing model the train movement along components switches and level crossings depends on both the train and components control. Whereas, in one dimensional control train is the only authority to control a switch and level crossing required for its desired operation. For this reduction, concurrent and mobile agent concepts are required. Therefore, we integrate mobile agent concepts with Petri nets to develop the mobile Petri net (MPN) a new class of PNs. This supports both mobility and concurrency. Further, we prove that the collection of different MPNs in a connected network is a PN. This proof allowed us to use the properties of PN to verify the system. Finally, we use MPN to model the safety properties of MBRIS along the switch and level crossing. This provides one dimensional control to a train along a switch and level crossing which increases the safety of the railway interlocking system. Moreover, we use reachability graph (RG) to verify the switch and level crossing models.     

Electropolymerized Diphenylamine on Functionalized Multiwalled Carbon Nanotube Composite Film and Its Application to Develop a Multifunctional Biosensor

Diphenylamine (DPA) monomers have been electropolymerized on the amino‐functionalized multiwalled carbon nanotube (AFCNT) composite film modified glassy carbon electrode (GCE) by cyclic voltammetry (CV). The surface morphology of PDPA‐AFCNT was studied using field‐emission scanning electron microscopy (FE‐SEM). The interfacial electron transfer phenomenon at the modified electrode was studied using electrochemical impedance spectroscopy (EIS). The PDPA‐AFCNT/GCE represented a multifunctional sensor and showed good electrocatalytic behavior towards the oxidation of catechol and the reduction of hydrogen peroxide. Rotating‐disk electrode technique was applied to detect catechol with a sensitivity of 1360 µA mM^?1 cm^?2 and a detection limit of 0.01 mM. Amperometric determination of hydrogen peroxide at the PDPA‐AFCNT film modified electrode results in a linear range from 10 to 800 µM, a sensitivity of 487.1 µA mM^?1 cm^?2 and detection limit of 1 µM. These results show that the nano‐composite film modified electrode can be utilized to develop a multifunctional sensor.     

The Biosynthesis and Catabolism of the Maleic Anhydride Moiety of Stipitatonic Acid

A series of directed knockout experiments, combined with an in vitro assay of pathway components, has elucidated for the first time the chemical steps involved in the biosynthesis of the tropolone class of fungal maleic anhydrides. The pathway involves the stepwise oxidation of aldehyde and methyl carbon atoms to form a 1,2‐dicarboxylate. A hydrolase‐catalyzed interconversion of this and the corresponding maleic anhydride, followed by decarboxylation of the diacid leads to the pathway’s final product of stipitatic acid.     

Determination of ultra traces of lead in water samples after combined solid-phase extraction–dispersive liquid–liquid microextraction by graphite furnace atomic absorption spectrometry

A solid-phase extraction coupled with dispersive liquid–liquid microextraction (DLLME) method followed by graphite furnace atomic absorption spectrometry (GFAAS) was developed for the extraction, preconcentration, and determination of ultra trace amounts of lead in water samples. Variables affecting the performance of both steps were thoroughly investigated. Under optimized conditions, 100 mL of lead solution were first concentrated using a solid phase sorbent. The extracts were collected in 1.50 mL of THF and 18 μL of carbon tetrachloride was dissolved in the collecting solvent. Then 5.0 mL pure water was injected rapidly into the mixture of THF and carbon tetrachloride for DLLME, followed by GFAAS determination of lead. The analytical figures of merit of method developed were determined. With an enrichment factor of 1,800, a linear calibration of 3–60 ng L^?1 and a limit of detection of 1.0 ng L^?1 were obtained. The relative standard deviation for seven replicate measurements of 30 ng L^?1 of lead was 5.2 %. The relative recoveries of lead in mineral, tap, well, and river water samples at spiking level of 10 and 20 ng L^?1 are in the range 94–106 %.     

A Cleavable Crosslinking Strategy for Commodity Polymer Functionalization and Generation of Reprocessable Thermosets

Covalently crosslinked polymeric materials, known as thermosets, possess enhanced mechanical strength and thermal stability relative to the corresponding uncrosslinked thermoplastics. However, the presence of covalent inter-chain crosslinks that makes thermosets so attractive is precisely what makes them so difficult to reprocess and recycle. Here, we demonstrate the introduction of chemically cleavable groups into a bis-diazirine crosslinker. Application of this cleavable crosslinker reagent to commercial low-functionality polyolefins (or to a small-molecule model) results in the rapid, efficient introduction of molecular crosslinks that can be uncoupled by specific chemical inputs. These proof-of-concept findings provide one potential strategy for circularization of the thermoplastic/thermoset plastics economy, and may allow crosslinked polyolefins to be manufactured, used, reprocessed, and re-used without losing value. As an added benefit, the method allows the ready introduction of functionality into non-functionalized commodity polymers.     

Interface,morphology, and the rheological properties of polymethylmethacrylate/impact modifier blends

Impact modifiers with grafted PMMA shell are used to modify polymethylmethacrylate matrix. The composition of the shell is chosen to enhance the interactions at the modifier/matrix interface and to obtain good dispersion of the impact modifier in order to optimize impact strength of the blend. The degree of interactions at the interface is characterized by the interfacial region where the chains of the matrix mix with those of the shell of the modifier. The deviation of the measured viscoelastic behavior of these blends from that predicted by the emulsion models has been attributed to the formation of the network structure due to the association of matrix chains with the shell of the modifier. It is expected that the network structure will decrease with increasing frequency and, as such, the effective volume of the particle is frequency dependent. This study uses the emulsion models to estimate the larger effective volume of the particle and, therefore, the extent of interaction at the interface. In the blends of this study it can be shown that at low modifier levels the solvent swelling of the modifier shell results in stronger interactions with the matrix; this effect is negated by the aggregation of particles at higher modifier loadings. The interaction of core modifier with the PMMA matrix seems to be similar to that of the core-shell modifier. This would not be expected from the calculated interfacial thickness of approximately 4 nm. It is, therefore, proposed that during melt-processing the core modifier surface was altered due to grafting of the matrix PMMA chains during melt-blending to (BA/St) copolymer of the core modifier thus reducing the interfacial tension. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2623–2634, 1998     

Current Scenario and Future Prospective of Ionic-Liquid Doped Polymer Electrolyte for Energy Application

Solid polymer electrolyte (SPE) films based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF–HFP) with salt and ionic-liquid (IL) are synthesized using the solution-cast technique and summarized in this review. Doping ILs or salts increases ionic conductivity up to the device level. This is further confirmed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD) measurements. Polarized optical microscopy (POM) affirms that enhancement in ionic conductivity is due to increase in amorphous nature of film. The complex nature of polymer electrolyte films is confirmed using Fourier transform infrared (FT-IR) spectroscopy. Overall results show that doping IL into polyether matrix is advantageous material playing a dominant role in electrochemical devices.     

ChemInform Abstract: First Principles Calculations of Electronic Structure and Magnetic Properties of Cr‐Based Magnetic Semiconductors Al1‐xCrxX (X: N,P, As,Sb).

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.