Amino-Modified Silicate Xerogels Complexed with Cu(II) as Catalyst Precursors. Coordination State and Thermal Decomposition

The sol-gel process is a useful method for preparing two series of organically and co-ordinately modified xerogels of the types [CuN _n ]·N _5–n ·5xSiO_4/2 (n < 4) and [Cu(N–N)_n]·(N–N)_2–n ·2x SiO_4/2(n 2), where N = NH₂(CH₂)₃ SiO_3/2, N–N = NH₂(CH₂)₂NH·(CH₂)₃SiO_3/2 and x = [SiO_4/2]/[N] or [SiO_4/2]/[N–N]. The amino groups in the materials are coordinately active and participate partly in the coordination sphere of Cu(II) ions. The composition of the coordination sphere can be varied with the SiO_4/2 content and also as a result of the thermal decomposition of the organic residues at higher temperatures.Because the xerogel materials are considered to be catalyst precursors, this study is focused on their coordination and thermal properties. The prepared xerogels, such as silica, aminated silicates with N and N–N, as well as those entities complexed with Cu(II), were characterised by FT-IR spectroscopy. During gelation and thermal decomposition the materials were analysed by electron paramagnetic resonance (EPR) spectroscopy. The xerogels were additionally studied by UV-Vis absorption spectroscopy. The gaseous products of the thermal decomposition of these materials in an Ar atmosphere were investigated by the use of FT-IR spectroscopy coupled with TG and DTG thermal analysis. These data were complemented by temperature-programmed decomposition (TPDec) in a 2% O₂ + 98% Ar stream coupled with quadrupole mass spectroscopy.     

Routine determination of major anions in atmospheric aerosols by capillary electrophoresis

Capillary electrophoresis (CE) with indirect UV detection utilizing a pyromellitate-based electrolyte was used for the routine analysis of major anions in atmospheric aerosols collected on filters with high-volume (Hi-Vol) samplers. The long-term reliability of the CE system was checked over an 8-month period during which over 2900 samples were analyzed. In addition, approximately 1100 samples were analyzed in parallel by ion chromatography (IC). It has been shown that acceptable analytical performance can be routinely obtained. The agreement between the CE and IC results is good, generally better than 20% at concentrations larger than 1 mg l⁻¹.     

Kinetics and mechanism of the first aquation stage for the [Cr(pic)3]0 and [Cr(pic)2(OH)]2 0 complexes in HClO4 solutions

Aquation of [Cr(pic)₃]⁰ and [Cr(pic)₂(OH)]₂ ⁰ in aqueous HClO₄ solutions leads to formation of the common product – [Cr(pic)₂(H₂O)₂]⁺. The first, reversible stage, the ring opening via Cr—N bond breaking in [Cr(pic)₃]⁰ is followed by the second, rate-determining step – one-end bonded pic ligand liberation. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the first faster stage produces the singly bridged dimer, which undergoes cleavage into the parent monomers in the second, much slower step. The subsequent aquation of [Cr(pic)₂(H₂O)₂]⁺ is extremely slow and leads to [Cr(pic)(H₂O)₄]²⁺ formation, which practically does not undergo further ligand substitution under the conditions applied. Kinetics of the first aquation stage for [Cr(pic)₃]⁰ and of the second step for [Cr(pic)₂(OH)]₂ ⁰ were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range at I = 1.0 M. The observed pseudo-first order rate constant for [Cr(pic)₃]⁰ decreases with [H⁺] increase according to the rate law: k _obs = k ₁ + k _–1 Q ₁/[H⁺], where k ₁ and k _–1 are the rate constants of the forward and the reverse processes in the unprotonated substrate and Q ₁ is the protonation constant of the pyridine nitrogen atom. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the rate for the singly bridged dimer cleavage does not depend on [H⁺]. The activation parameters for the chelate-ring opening in [Cr(pic)₃]⁰ and for the singly bridged dimer cleavage have been determined and discussed. Some kinetic data of the slow, second aquation stage for the [Cr(pic)₃]⁰ complex and of the fast, first aquation stage for the doubly bridged dimer have been studied; for both reactions the rate increases linearly with the increase in [H⁺].     

Thermal stability and degradation of starch derivatives

Thermal behaviour of different starch derivatives, i.e. starch esters and ethers having degree of substitution (DS) in the range of 0.02–0.18 were studied. Potato, maize and wheat starches were used. Measurements were carried out by coupled thermal analysis/ mass spectrometry method (STA-MS) in air atmosphere. The major DTG peak during the investigation for starch derivatives is observed below 300°C. The mass loss up to a temperature of 300°C is about 50%. The most abundant ions found areH₂O⁺ and CO₂ ⁺. For the studied starch derivatives with a low degree of substitution (DS<0.18) no correlation was found between thermal stability and the level of substitution regardless of the nature of substitution.     

Adsorption of lignite-derived humic acids on coal-based mesoporous activated carbons

The adsorption by a coal-based mesoporous activated carbon of humic acids (HAs) isolated from two Polish lignites was studied. For comparison, a commercial Aldrich humic acid was also included into this study. The differences in chemical structure and functional groups of HAs were determined by elemental analysis and infrared spectroscopy DRIFT. Two activated carbons used differed in terms of mesopore volume, mesopore size distribution, and chemical properties of the surface. The kinetics of adsorption of HAs have been discussed using three kinetic models, i.e., the first-order Lagergren model, the pseudo-second-order model, and the intraparticle diffusion model. It was found that the adsorption of HAs from alkaline solution on mesoporous activated carbon proceeds according to the pseudo-second-order model. The correlation coefficients were close to 1. The intraparticle diffusion of HA molecules within the carbon particle was identified to be the rate-limiting step. Comparing the two activated carbons, the carbon with a higher volume of pores with widths of 10-50 nm showed a greater removal efficiency of HA. An increase in the Freundlich adsorption capacity with decreasing carbon content of HA was observed. Among the HAs studied, S-HA shows characteristics indicating the highest contribution of small-size fraction. The S-HA was removed by both activated carbons to the highest extent. The effect of pH solution on the adsorption of HA was examined over the range pH 5.4-12.2. It was found that the extent of adsorption decreased with decreasing pH of the solution.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.     

Cationic Heteroconjugation Constants in the OHN+ and NHO+ Systems in Propylene Carbonate: Dependence on Difference in Basicity

Cationic heteroconjugation equilibria of more than ninety systems consisting of substituted pyridines, their N-oxides, and trimethylamine N-oxide, i. e., in systems with mixed hydrogen bridges of type OHN⁺ (NHO⁺) were studied in propylene carbonate. Both experimental systems without proton transfer, BH⁺/B₁, and those with proton transfer, B₁H⁺/B, were explored. The stability of the mixed hydrogen bridges, OHN⁺ (NHO⁺), is compared with that of the OHC⁺-type bridges. The influence of the difference in basicity of the conjugate base of the proton donor and the proton acceptor on the presence of the proton transfer equilibria, and, consequently, the possibility of determination of the cationic heteroconjugation constant values is discussed.     

New phosphonic analogs of aspartic and glutamic acid by aminoalkylation of trivalent phosphorus chlorides with ethyl acetyloacetate or ethyl levulinate and benzyl carbamate

Preparation of the phosphonic analogs of -methylaspartic (4 a–d), glutamic (7 a–b) and -methylpyroglutamic (5 a–b) acids by aminoalkylation of trivalent phosphorus chlorides with ethyl esters of oxoalkyloacids and benzyl carbamate is described. The phosphonic analogs of pyroglutamic acid (8 a–b) was obtained by the cyclization of the corresponding esters (9 a–b). The stability of the phosphonic analogs of pyroglutamic acid in acidic and alkaline media was also studied.

---

Die Herstellung von neuen Phosphonanalogen der Asparagin- und Glutaminsäure in der Reaktion von trivalenten Phosphorchloriden mit Ethyl-acetyloacetat oder Ethyl-lävulinat bzw. Benzylcarbaminat

Zusammenfassung Es wurde die Darstellung der Phosphonanalogen der -Methylasparaginsäure (4 a–d), Glutamin- (7 a–b) und -Methylpyroglutaminsäure (5 a–b) in der Reaktion der trivalenten Phosphorchloride und der Oxoalkansäureethylester sowie des Benzylcarbaminats beschrieben. In der Ringschlußreaktion der Ester (9 a–b) erhält man Phosphonanaloge der Pyroglutaminsäure. Die Stabilität der Analogen der Pyroglutaminsäure wurde in sauren und alkalischen Medien geprüft.

     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.