Comparison of the utility of several tensammetric techniques for the determination of traces of surfactants after preconcentration at the hanging mercury drop electrode

After preconcentration of surfactants at the HMDE, four tensammetric signals were examined to establish the optimum conditions for the determination of ultratraces of surfactants in alkaline, neutral and acidic media. The signals studied were: (1) the depth of the depression occuring on the curves obtained in a.c. fundamental tensammetry; and (2–4) the height of the peaks on the curves obtained in a.c. fundamental tensammetry, a.c. second-harmonic tensammetry and differential pulse tensammetry, respectively. The lowest detection limits found for Triton X-100 and a polyethylene glycol (PEG-4000) were 10 and 2 μg dm^-3, respectively. Traces of surfactants found in supporting electrolytes (ca. 25 μg dm^-3) gave desorption peaks at potentials around ?1 V. These contaminants had no significant effect on the peaks on Triton X-100 and PEG-4000 and they affected the SDS peak markedly. The reproducibility of the results obtained for SDS was poorer than for Triton or PEG.     

Lipophilic complexones,part 3. Synthesis of polyamines derived from 2-alkyl-1,3-propanediols and 2,2-bis(hydroxymethyl)alkanols

Lipophilic di-, tri-, tetra-, and hexaamines were synthesized from 2-alkyl-1,3-propanediols and 2,2-bis(hydroxymethyl)alkanols. The alcohols were converted into the sulfonate esters which were substituted with ethylenediamine or sodium azide. The azides were directly reduced to give amines. Also dioxyethylenated 2-octadecyl-1,3-propanediol yielded the corresponding amine. Some amines were converted into the salicylidene derivatives.     

High Yield Synthesis and Preliminary Spectroscopic Study of Mono-N-alkylated Cyclen Derivatives of Salicylic Acid

Selective and high yield synthesis of N-substituted salicylic acid derivatives of cyclen has been achieved by using a direct synthetic procedure under mild reaction conditions. The protonation constants of these compounds were determined by potentiometric titration. The complexing properties of the cyclen derivatives with metal cations were investigated by UV–Vis spectroscopy and ¹H NMR. The stability constants of Mg²⁺, Ca²⁺ and Sr²⁺ complexes with ligands 5 and 6 were determined.     

NMR studies of mononuclear octahedral Ni(II) complexes supported by tris((2-pyridyl)methyl)amine-type ligands

The recent discovery of acireductone dioxygenase (ARD), a metalloenzyme containing a mononuclear octahedral Ni(II) center, necessitates the development of model systems for evaluating the role of the metal center in substrate oxidation chemistry. In this work, three Ni(II) complexes of an aryl-appended tris((2-pyridyl)methyl)amine ligand (6-Ph(2)TPA, N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (1), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))]ClO(4) (3), and [(6-Ph(2)TPA)Ni-Cl(CH(3)CN)]ClO(4) (4), and one Ni(II) complex of tris((2-pyridyl)methyl)amine, [(TPA)Ni(CH(3)CN)(H(2)O)](ClO(4))(2) (2), have been characterized in acetonitrile solution using conductance methods and NMR spectroscopy. In acetonitrile solution, 1-4 have monomeric cations that exhibit isotropically shifted (1)H NMR resonances. Full assignment of these resonances was achieved using one- and two-dimensional (1)H NMR techniques and (2)H NMR of analogues having deuteration of the supporting chelate ligand. COSY cross peaks were observed for pyridyl protons of the 6-Ph(2)TPA ligand in 1 and 3. This study lays the groundwork for using NMR methods to examine chemical reactions of 1 and 2 with model substrates of relevance to ARD.     

NMR Investigation of beta-Substituted High-Spin and Low-Spin Iron(III) Tetraphenylporphyrins

The NMR spectra of a series of beta-substituted iron(III) tetraphenylporphyrin (2-X-TPP) complexes have been studied to elucidate the relationship between the electron donating/withdrawing properties of the 2-substituent and the (1)H NMR spectral pattern. The electronic nature of the substituent has been significantly varied and covered the -0.6 to 0.8 Hammett constant range. Both high-spin and low-spin complexes of the general formula (2-X-TPP)Fe(III)Cl and [(2-X-TPP)Fe(III)(CN)(2)](-) have been investigated. The (1)H NMR data for the following substituents (X) have been reported: py(+), NO(2), CN, CH(3), BzO (C(6)H(5)COO), H, D, Br, Cl, CH(3), NH(2), NH(3)(+), NHCH(3), OH, and O(-). The (1)H NMR resonances for low-spin dicyano complexes have been completely assigned by a combination of two-dimensional COSY and NOESY experiments. In the case of selected high-spin complexes, the 3-H resonance has been identified by the selective deuteration of all but the 3-H position. The pattern of unambiguously assigned seven pyrrole resonances reflects the asymmetry imposed by 2-substitution and has been used as an unique (1)H NMR spectroscopic probe to map the spin density distribution. The pyrrole isotropic shifts of [(2-X-TPP)Fe(III)(CN)(2)](-) are dominated by the contact term. In order to quantify the substituent effect, the dependence of isotropic shift of all low-spin pyrrole resonances and 3-H high-spin pyrrole resonance versus Hammett constants has been studied. The electronic effect is strongly localized at the beta-substituted pyrrole. The major change of the isotropic shift has also been noted for only one of two adjacent pyrrole rings, i.e., at 7-H and 8-H positions. These neighboring protons, located on a single pyrrole ring, experienced opposite shift changes when electron withdrawing/donating properties were modified. Two other pyrrole rings for all investigated derivatives revealed considerably smaller, substituent related, isotropic shift changes. A long-range secondary isotopic shift has been observed for [(2-D-TPP)Fe(III)(CN)(2)](-). The effect is consistent with a general spin density distribution mechanism due to beta-substitution. A fairly good correlation between the 3-H isotropic shift of (2-X-TPP)Fe(III)Cl and the Hammett constant has been found as well. The observed contact shift pattern of [(2-X-TPP)Fe(III)(CN)(2)](-) reflects spin pi delocalization into the highest filled MO equivalent to the unsubstituted porphyrin 3e(pi) orbital. To account for the substituent contribution, the semiquantitative Fenske-Hall LCAO method has been used to determine the molecular orbitals involved in the spin density delocalization. For low-spin complexes, (13)C pyrrole resonances of carbons bearing a proton have been identified by means of a (1)H-(13)C HMQC experiment. The reversed order of (13)C resonance patterns as compared to their (1)H NMR counterparts has been determined, e.g., the largest isotropic shift of 3-H has been accompanied by the smallest measured (13)C isotropic shift. Analysis of the isotropic shifts in (2-X-TPP)Fe(III)Cl and [(2-X-TPP)Fe(III)(CN)(2)](-) suggests that the observed regularities of the electronic structure modification due to the beta-substitution should apply to iron(III) natural porphyrin or geoporphyrin complexes.     

Polymerization of 1,3,5-trithiane in the solid state initiated by UV-irradiation. I. Polymerization conditions and polymer characterization

The solid-state 1,3,5-trithiane polymerization initiated by UV-irradiation was studied at various irradiation times and various polymerization temperatures. The conversion of monomer to polymer reaches limiting values (at longest) in about 30 min of reaction. The apparent activation energy of this process is somewhat higher than in the chemically initiated polymerization. Generated by UV, active centers, which initiate the polymerization, are stable. On the basis of X-ray diffraction studies it was found that the prepared polythiomethylene has a hexagonal structure and high degree of crystallinity. In the polymer investigated, a new additional crystal phase is formed, which is not stable.     

THE EFFECT OF POTASSIUM IODIDE ON PHOTOPHOBIC RESPONSES IN EUGLENA: EVIDENCE FOR TWO PHOTORECEPTOR PIGMENTS*

Abstract— Potassium iodide, a quencher of flavin fluorescence, inhibits the shock reaction which Euglena experiences upon a sudden decrease in light intensity (inverse photophobic response) completely at a concentration of 150 mM. The rate of swimming of the cells at the same concentration of KI is reduced to 30% of the control. The direct photophobic response, a shock reaction which appears identical but occurs upon an increase in light intensity, is unaffected by KI as is negative phototaxis of Euglena. It is concluded that a non-flavin pigment system mediates photoreception for the direct photophobic response and negative phototaxis.     

A Chemical Recognition Element for Lithium Ions Based on Optical Electronic Absorption

Xerogel samples with entrapped series of four optical absorption chemosensors were prepared by sol-gel process. These materials are proposed as chemical recognition elements of an optical chemical sensor. The roles of the chemosensors play proton-dissociable chromogenic azocrown ethers bearing phenol and two azo groups as parts of macrocycles. Occurrence of the alkali ion—receptor interaction is signalled by the chemosensors changing their electronic absorption spectra. By this way chemosensor 4O-CH₃ is able to distinguish Li⁺ ions from other alkali metal ions present in aqueous solution, if the chemosensor is entrapped in Glymo-silica (1:1) xerogel matrix. The proposed recognition element for Li⁺ has been exposed to the cycles chemisorption—desorption many times. Besides DRIFT spectra of the used xerogel matrices were analyzed.     

Monothiourea-3-nitrophthalic acid as a new reagent for spectrophotometric analyses : II. Determination of ruthenium(III) ions

The results of the examination of the reaction between a new reagent, MT3NF acid, and palladium(II) ions, as well as the composition of the formed complexes have been discussed. The new extraction-spectrophotometric method for the determination of palladium(II) ions by using MT3NF acid was presented. Beer's law is obeyed over the range 0.1 to 3 μg of Pd/cm³. Molar absorptivity is 2.9 × 10⁴ liter mol⁻¹ cm⁻¹ at the absorption maximum of 306 nm. The influence of different ions has been described.     

Gradual transformation of Ca(OH)<Subscript>2</Subscript> into CaCO<Subscript>3</Subscript> on cement hydration

The low temperature of decomposition of some calcium carbonates and the bending of the TG curves of hydrated cement between 500 and 800°C suggested the presence of some complex compound(s), which needed complementary investigation (XRD, TG). Stepwise transformation of portlandite (and/or lime) into calcium carbonate, with intermediate steps of calcium carbonate hydroxide hydrates (CCH-1 to CCH-5), was indicated by the previous study of two OPC. This was checked here on four cements ground for t _g=15, 20, 25 and 30 min and hydrated either in water vapour, successively at RH=1.0, 0.95 and 0.5 for 2 weeks each (WR1, WR2 and WR3, respectively) or as mortars in liquid water (1m), followed by WR as above. The d[001] spacing of portlandite was confirmed to vary: here between the lowest and the highest standard values. The diffractograms of n=32 different samples were analyzed for presence of standard CCH peaks, generally slightly displaced. These were: CCH-1 [Ca₃(CO₃)₂(OH)₂]: N=11 peaks, of three different d[hkl] spacings, CCH-2 [Ca₆(CO_2.65)₂(OH₆₅₇)₇(H₂O)₂]: N=10 for two d[hkl], CCH-3 [Ca₃(CO₃)₂(OH)₂·1.5H₂O]: N=14 for five d[hkl], CCH-4, ikaite [CaCO₃(H₂O)₆]: N=13 for six d[hkl], CCH-5[CaCO₃(H₂O)]: N=15 for five d[hkl]. Thus the most probable is the presence of the last three. The stepwise transformation of Ca(OH)₂ into CaCO₃ was confirmed: