Solvation of Cobalt(II) Ion in N,N-Dimethylformamide–Methanol Mixed Solvent: Calorimetry and VIS Spectroscopy Studies

The enthalpies of solution of Co(II) and Na(I) trifluoromethanesulfonates (triflates) in N,N-dimethylformamide (DMF)–methanol (MeOH) mixtures have been measured over the whole range of solvent composition. From these data the enthalpies of transfer of Co(II) and triflate ions from methanol to the mixed solvent have been determined usingliterature values of the enthalpies of transfer of the Na⁺ ion. The results have been analyzed by means of the theory of preferential solvation. The analysis revealed the preference of DMF for solvating the Co(II) ion in the MeOH-rich region of solvent composition and the lack of preference of any component in the DMF-rich region. Visible absorption spectra of the Co(II) ion in DMF–MeOH mixtures have been also measured in the whole range of solvent composition and analyzed using the partial least-squares method. The mean composition of the solvation sphere of the Co(II) ion versus solvent composition has been determined on the basis of both analyses. The results were found to be consistent with each other and with those obtained previously from FT-IR spectra.     

Untersuchungen über das Gleichgewicht des Hg2+-Hg 2 2+ -Hg-Systems in konzentrierten Perchloratlösungen

The formal potentials of the Hg²⁺/Hg ₂ ²⁺ , Hg ₂ ²⁺ /Hg and Hg²⁺/Hg redox couples and the apparent equilibrium constants of the reaction Hg²⁺ + Hg ∝ Hg ₂ ²⁺ in conc. aqueous solutions of Mg(ClO₄)₂ and Ca(ClO₄)₂ have been determined from emf measurements performed using cells with liquid junction. Based on these data, the hydration numbers of the Hg²⁺ and Hg ₂ ²⁺ ions were estimated.     

Kinetics and mechanism of one dipicolinato ligand substitution in the chromium(III)–bis(dipicolinato) complex: an unusual rate dependence on acid concentration

The Na[Cr(PDA)₂] · 2H₂O complex (PDA¹ = dipicolinic acid anion) and its aquation product, [Cr(PDA)(H₂O)₃]⁺, were prepared and characterized. The electronic spectra demonstrate that the bis(dipicolinato) complex undergoes very fast partial dechelation during dissolution. In acidic media, pH controlled, rapid protolytic and ring opening processes lead to coexistence of complexes with one tridentate (PDA) and the other bi- or mono-dentate (PDA). The kinetics of PDA ligand liberation were followed spectrophotometrically within the 0.1–2.0 M HClO₄ range at I = 2.0 M. The observed first-order rate constant depends on [H⁺] according to the equation: k _obs = A[H⁺]/(1 + B[H⁺] + C[H⁺]²). A reaction course via the uncharged [Cr(PDA)(HPDA)(H₂O)₂]⁰ complex is proposed. The observed rate increase, followed by rate retardation with [H⁺] increase, is attributed to the unreactive [Cr(PDA)(H₂PDA)(H₂O)₂]⁺ complex. In terms of the proposed mechanism, A, B, C parameters have been defined as: A = k ₁ Q ₁, B = Q ₁, C = Q ₁ Q ₂ where k ₁ is the rate constant of the Cr^III-carboxylato oxygen bond-breaking in the monodentate HPDA ligand, Q ₁ is a composite value describing protolytic and dechelation processes and Q ₂ is the protonation constant of the uncharged [Cr(PDA)(HPDA)(H₂O)₂]⁰ complex.     

Dynamic Light Scattering and NMR Studies of Napin

We analyze the structure of napin (BngNAP1), a storage protein (m.w. 14.5 kDa) from Brassica napus. On the basis of the results of ¹H NMR spectroscopy and dynamic light scattering (DLS) studies, the overall shape and secondary structure of the molecule are estimated.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Elimination of SAS Interferences in Catalytic Adsorptive Stripping Voltammetric Determination of Cr(VI) by Means of Fumed Silica

In the work the procedure of chromium(VI) determination by catalytic adsorptive stripping voltammetry (CAdSV) with application of fumed silica, is presented. Two variants of the method are proposed: in the first fumed silica is put directly to the electrolytic cell containing tested solution, in the second the silica is shaken with the sample and next centrifuged. The effectiveness of many surface‐active substances removal from synthetic solutions as well as natural water samples, is studied. In the experiments the fumed silica (Sigma‐Aldrich) of the specific surface area in the range 200–390 m² g^?1 was used. Two types of the working electrodes were applied, i.e., hanging mercury drop electrode (HMDE) and cyclic renewable mercury film electrode (Hg(Ag)FE). In the silica presence i) the relative standard deviation (RSD) for 0.1 μg L^?1 Cr(VI) is <2% (HMDE) and <5% (Hg(Ag)FE), n=7, ii) the detection limits estimated deposition time 20 s were respectively 14 ng L^?1 (HMDE) and 22 ng L^?1 (Hg(Ag)FE). The accuracy of the method was tested by studying the recovery of Cr(VI) from spiked natural water samples.     

Sustainable Processes Employing Ionic Liquids for Secondary Alcohols Separation

Secondary chiral alcohols are very attractive intermediates in organic synthesis of pharmaceutical and the fine-chemical industries. The processes employing ionic liquids to obtain enantiomers of secondary alcohols have become sustainable. Furthermore, physico-chemical properties of ionic liquids opened new possibilities to design “solvent free” processes for the resolution of racemic secondary alcohols. This review is aimed to highlight some of the most important achievements in resolution of secondary alcohols.     

Electrochemical study of 18-crown-6-Tl+ complexes in binary solvent mixtures

Summary The formation constants,K _S, of the 18-crown-6 complex with thallium(I) ion were studied by polarographic measurements in binary mixtures of acetonitrile, acetone, tetrahydrofuran, and dimethylsulfoxide with water, as a function of the solvent mole fraction. In all the cases, the variation of the stability constant can be described by the empirical relation logK _S=a[(–1)/(2+1)]+b where stands for relative permittivity of a given mixture anda andb mark the regression coefficients. The values ofa calculated for four series of binary mixtures showed correlation with the Gutmann donor numbers of the neat organic solvents which form the mixture.On leave from the Department of Chemistry, Jingzhou Teacher's College, Jingzhou, Hubei, China     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.