Co-eluent effect in partition chromatography. Rhamnose-xylose separation with strong and weak cation-exchangers in aqueous ethanol

The effect of ethanol in aqueous eluent on the chromatographic separation was studied at 298 K. Two sugars, L-rhamnose and D-xylose, were separated by using strong and weak cation-exchangers as a stationary phase. The ionic form of the resins was Na+ or Ca2+. The separations were carried out with sugar feed concentrations up to 35 wt% and with both low (about 1%) and high (about 10%) feed volume to bed volume ratios. The separation of the sugars was improved by adding ethanol into the eluent. The separation was also significantly enhanced when the weak cation-exchangers with the greatest affinity for water were used instead of strong cation-exchangers as a separation medium for the sugars having different hydrophilicities. The experimental data were successfully explained with a rate-based column model, which accounted for the volume changes of the stationary phase. A thermodynamic sorption model was utilized in column calculations.     

Comparison of polydimethyl siloxane stationary phases with 5% and 50% phenyl substitution for the separation of organophosphorus and organonitrogen pesticides under optimized gas chromatographic conditions

The CGC analysis of 25 organophosphorus and organonitrogen pesticides was optimized on two different stationary phases, namely a 5% diphenyl dimethyl silicone (SE-54 type) and a 50% diphenyl dimethyl silicone (OV-17 type) by selecting the best temperature program conditions, using computer simulation.     

Rapid identification and quantitation of compounds with forensic interest using fast liquid chromatography-ion trap mass spectrometry and library searching

A fast liquid chromatography-electrospray tandem mass spectrometric (LC-ESI-MS-MS) method by using a monolithic column, gradient elution and ion trap mass spectrometer was developed for 14 forensically interesting and chemically different compounds. All compounds were eluted within 2.5 min and the total analysis time was 5 min including stabilisation time required for the next injection. All the compounds, basics, neutrals and acids were efficiently ionised by positive ion ESI. A laboratory library including MS-MS spectra and retention times was developed and tested. Results with 476 standard samples and 50 authentic samples showed that the compounds studied can be unambiguously identified with the library. A quantitative method was developed for the compounds using external calibration. The evaluation process showed good linearity of the method and reasonable repeatability. Limits of detection ranged from 10.0 to 50.0 ng/ml.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Effects of various washing procedures on the chromium content of human scalp hair

The effects of four wash procedures on the concentration of chromium in a pooled sample of human scalp hair are compared. The wash solutions examined are Triton X-100, sodium lauryl sulphate, acetone, and a mixture (1 + 1) of hexane and ethanol. The plateaux reached for hair chromium concentration are functions of the number of washings, and are characteristic for each wash solution. The wash procedure recommended involves two 20-min washes with aqueous 1% sodium lauryl sulphate solution after a hexane rinse.     

Complexometric titration of Aluminium

A procedure is given for the complexometric titration of aluminium. A known volume of a standard solution of EDTA is added to the sample solution, and the excess is back-titrated with a zinc sulphate solution, dithizone being used as indicator. The titration is performed at pH = 4.0 — 4.5 and 40 — 50% alcohol is added as solvent for the indicator.The theoretical basis of the method is developed, and the theoretical titration error with various amounts of aluminium and zinc is calculated.The results of some titrations are given.     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.     

The backus-gilbert method revisited: background,implementation and examples

The paper deals with the Backus-Gilbert or averaging kernel inversion of linear integral equations. The theoretical background of the method is developed: it is shown that the method leads to a sequence of linear pointwise estimates, which are asymptotically unbiased when no error is present. Anumerical implementation is given. Finally, the algorithm is applied to numerical differentiation, Laplace transform inversion and to a geophysical inverseproblem arising in electromagnetic sounding.     

Engineering strategy to improve peptide analogs: from structure-based computational design to tumor homing

We present a chemical strategy to engineer analogs of the tumor-homing peptide CREKA (Cys-Arg-Glu-Lys-Ala), which binds to fibrin and fibrin-associated clotted plasma proteins in tumor vessels (Simberg et al. in Proc Natl Acad Sci USA 104:932–936, 2007) with improved ability to inhibit tumor growth. Computer modeling using a combination of simulated annealing and molecular dynamics were carried out to design targeted replacements aimed at enhancing the stability of the bioactive conformation of CREKA. Because this conformation presents a pocket-like shape with the charged groups of Arg, Glu and Lys pointing outward, non-proteinogenic amino acids α-methyl and N-methyl derivatives of Arg, Glu and Lys were selected, rationally designed and incorporated into CREKA analogs. The stabilization of the bioactive conformation predicted by the modeling for the different CREKA analogs matched the tumor fluorescence results, with tumor accumulation increasing with stabilization. Here we report the modeling, synthetic procedures, and new biological assays used to test the efficacy and utility of the analogs. Combined, our results show how studies based on multi-disciplinary collaboration can converge and lead to useful biomedical advances.