pH dependence of tailing in reversed-phase chromatography of a cationic dye: measurement of the strong adsorption site surface density

A question that has interested Dr. J.J. Kirkland is addressed: what is the nature of the silanols that cause tailing to persist at low pH in reversed-phase chromatography? Chromatograms for a cationic dye, 1,1'-didodecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate (DiI), were studied at varying pH using an Agilent SB-C8 column and 80% ACN/water for six DiI concentrations ranging from 0.9 to 316 microM. The chromatograms showed increased retention and tailing from pH 1 to 5, as expected. Simulations of the chromatograms agreed well with experiment for a bi-Langmuir isotherm with weak (C8) and strong (silica) adsorption sites. The simulation parameters revealed that the number of strong adsorption sites decreases by 40% from pH 1 to 5, which indicates that the silanols causing tailing are in the SiOH, not the SiO-, form. This seems paradoxical because tailing increases with increasing pH. The simulation parameters reveal that this increased tailing from pH 1 to 5 owes to doubling of the partition coefficient for DiI to the strong adsorption site, which more than compensates for the decreasing number of sites. We attribute this increased partition coefficient to increased long-range coulombic interactions with the increasingly abundant SiO- groups at higher pH, which boosts DiI's partition coefficient for both the C8 and SiOH sites. The picture thus emerges that for DiI, higher pH causes increased tailing because the SiO- groups exacerbate tailing that actually originates from adsorption to SiOH groups.     

Probing the stability and structure of metalloporphyrin complexes with basic peptides by mass spectrometry

The stability and structure of non-covalent complexes of various peptides contatining basic amino acid residues (Arg, Lys) with metalloporphyrins were studied in a quadrupole ion trap mass spectrometer. The complexes of heme and three other metalloporphyrins with a variety of basic peptides and model systems were formed via electrospray ionization (ESI) and their stability was probed by energy-variable collision-induced dissociation (CID). A linear dependence for basic peptides and model compounds/metalloporphyrin complexes was observed in the plots of stability versus degrees of freedom and was used to evaluate relative bond strength. These results were then compared with previous data obtained for complexes of metalloporphyrins with His-containing peptides and peptides containing no basic amino acids. The binding strengths of Lys-containing peptide complexes in the gas phase was found to be almost as strong as that of Arg-containing complexes. Both systems showed stronger binding than His- containing peptides studied previously. To probe the structure of Arg and Lys non-covalent complexes (charge solvation versus salt bridges), two techniques, CID and ionmolecule reactions, were used. CID experiments indicate that the gas-phase complexes are most likely formed by charge solvation of the central metal ion in the metalloporphyrin by basic side chains of Arg or Lys. Results from the ionmolecule reaction studies are consistent with the charge solvation structure as well.     

Potential-controlled switching of 2-(2'-thienyl)pyridine adsorbed on Au(111)

Switching between three different adsorbed states was achieved using potential control to separately induce electrochemical behaviour associated with changes in binding and orientation of the thiophene and pyridine moieties of 2-(2'-thienyl)pyridine adsorbed to Au(111) in neutral and basic solution.     

Erratum: Separability between valence and conduction bands in transition metal clusters

Density Functional Theory (DFT) and direct ab initio molecular dynamics (MD) calculations were applied to the hydrogen molecule trapped in a water cluster composed of 12 water molecules (H₂O)₁₂. The static DFT calculation showed that the H₂ molecule is trapped in the center of mass of (H₂O)₁₂. The vibrational frequency of the H–H stretching mode of the H₂ molecule trapped in the water cluster was blueshifted from that in vacuo. On the other hand, the vibrational frequency of H₂ in water‐hydrogen 1:1 complex (H₂O–H₂) was redshifted. A direct ab initio MD calculation of H₂(H₂O)₁₂ at 50 K indicated that the H₂ molecule is rotated freely around the center of mass of the water cluster. The origin of the spectral shift of H₂ in water ice is discussed on the basis of the theoretical results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Latex-functionalized monolithic columns for the separation of carbohydrates by micro anion-exchange chromatography

A novel stationary phase for micro ion chromatography has been prepared by coating a porous poly(butyl methacrylate-co-ethylene dimethacrylate-co-2-acrylamido-2-methyl-1-propanesulfonic acid) monolith with quaternary amine-functionalized latex particles via simple electrostatic binding. This stationary phase enabled the separation of saccharides in the mobile phase with a high-pH value consisting of aqueous ammonia solution in anion-exchange mode using evaporative light scattering for detection. Effects of both porous properties of the monolithic stationary phase and chromatographic conditions on the separation ability were studied. Under optimized conditions, an efficient separation of seven saccharides was achieved in less than 10 min. The stationary phase also enables the separation of saccharides obtained by the enzymatic hydrolysis of corn starch.     

Corynebactin and enterobactin: related siderophores of opposite chirality

Most species of bacteria employ siderophores to acquire iron. The chirality of the ferric siderophore complex plays an important role in cell recognition, uptake, and utilization. Corynebactin, isolated from Gram-positive bacteria, is structurally similar to enterobactin, a well known siderophore isolated from Gram-negative bacteria, but contains L-theronine instead of L-serine in the trilactone backbone. Corynebactin also contains a glycine spacer unit in each of the chelating arms. A hybrid analogue (serine-corynebactin) has been synthesized. The chirality and relative conformational stability of the three ferric complexes of enterobactin, corynebactin, and the hybrid has been investigated. In contrast to enterobactin, corynebactin assumes a Lambda configuration. However, the ferric serine-corynebactin hybrid forms a racemic mixture, only slightly favoring the Lambda conformation.     

Multiple time scale Hartree–Fock molecular dynamics

This is the first application of a rigorous, established multiple time-step method to ab initio molecular dynamics. The resulting algorithm is conceptually simple and easy to implement, but very effective. It translates the large mass differences present in ab initio molecular dynamics into substantial savings in computer time while retaining high accuracy. This transforms ab initio molecular dynamics from a desirable but prohibitively expensive possibility into a viable method, at least for short-time phenomena in small systems or for otherwise inaccessibly complicated potential energy surfaces. © 1993 John Wiley & Sons, Inc.     

Spectroscopic and photophysical properties of hexanuclear rhenium(III) chalcogenide clusters

The electronic, vibrational, and excited-state properties of hexanuclear rhenium(III) chalcogenide clusters based on the [Re(6)(mu(3)-Q)(8)](2+) (Q = S, Se) core have been investigated by spectroscopic and theoretical methods. Ultraviolet or visible excitation of [Re(6)Q(8)](2+) clusters produces luminescence with ranges in maxima of 12 500-15 100 cm(-)(1), emission quantum yields of 1-24%, and emission lifetimes of 2.6-22.4 microseconds. Nonradiative decay rate constants and the luminescence maxima follow the trend predicted by the energy gap law (EGL). Examination of 24 clusters in solution and 14 in the solid phase establish that exocluster ligands engender the observed EGL behavior; clusters with oxygen- or nitrogen-based apical ligands achieve maximal quantum yields and the longest lifetimes. The excited-state decay mechanism was investigated by applying nonradiative decay models to temperature-dependent emission experiments. Solid-state Raman spectra were recorded to identify vibrational contributions to excited-state deactivation; spectral assignments were enabled by normal coordinate analysis afforded from Hartree-Fock and DFT calculations. Excited-state decay is interpreted with a model where normal modes largely centered on the [Re(6)Q(8)](2+) core induce nonradiative relaxation. Hartree-Fock and DFT calculations of the electronic structure of the hexarhenium family of compounds support such a model. These experimental and theoretical studies of [Re(6)Q(8)](2+) luminescence provide a framework for elaborating a variety of luminescence-based applications of the largest series of isoelectronic clusters yet discovered.     

Formation of tryptanthrin compounds upon Oxone-induced dimerization of indole-3-carbaldehydes

Tryptanthrin is a natural product with numerous important pharmacological properties. Tryptanthrin and its analogs are commonly prepared by condensation of isatoic anhydride and isatin. In this Letter we investigate the formation of tryptanthrin derivatives upon Oxone-induced oxidative dimerization of indole-3-carbaldehydes.     

Iron-Catalyzed Halogen Exchange of Trifluoromethyl Arenes**

The facile production of ArCF₂X and ArCX₃ from ArCF₃ using catalytic iron(III)halides is reported, which constitutes the first iron-catalyzed halogen exchange for non-aromatic C−F bonds. Theoretical calculations suggest direct activation of C−F bonds by iron coordination. ArCX₃ and ArCF₂X products of the reaction are synthetically valuable due to their diversification potential. In particular, chloro- and bromodifluoromethyl arenes (ArCF₂Cl, ArCF₂Br respectively) provide access to a myriad of difluoromethyl arene derivatives (ArCF₂R). To optimize for mono-halogen exchange, a statistical method called Design of Experiments was used. Optimized parameters were successfully applied to electron rich and electron deficient aromatic substrates, and to the late stage diversification of flufenoxuron, a commercial insecticide. These methods are highly practical, being run at convenient temperatures and using inexpensive common reagents.