Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Digital model of a vacuum circuit breaker for the analysis of switching waveforms in electrical circuits

The article presents a method of modelling a vaccum circuit breaker in the ATP/EMTPpackage, the results of the verification of the correctness of the developed digitalcircuit breaker model operation and its practical usefulness for analysis of overvoltagesand overcurrents occurring in commutated capacitive electrical circuits and also examplesof digital simulations of overvoltages and overcurrents in selected electricalcircuits.     

Carbon/carbon supercapacitors

Supercapacitors, or electrochemical capacitors, are a power storage system applied for harvesting energy and delivering pulses during short periods of time. The commercially available technology is based on charging an electrical double-layer (EDL), and using high surface area carbon electrodes in an organic electrolyte. This review first presents the state-of-the-art on EDL capacitors, with the objective to better understand their operating principles and to improve their performance. In particular, it is shown that capacitance might be enhanced for carbons having subnanometric pores where ions of the electrolyte are distorted and partly desolvated. Then, strategies for using environment friendly aqueous electrolytes are presented. In this case, the capacitance can be enhanced through pseudo-faradaic contributions involving i) surface functional groups on carbons, ii) hydrogen electrosorption, and iii) redox reactions at the electrode/electrolyte interface. The most promising system is based on the use of aqueous alkali sulfate as electrolyte allowing voltages as high as 2 V to be reached, due to the high overpotential for di-hydrogen evolution at the negative electrode.     

Direct Observation of the Binding Mode of the Phosphonate Anchor to Nanosized Polyoxotitanate Clusters

The structures of three newly synthesized phosphonate‐substituted polyoxotitanates are reported. The Ti/O core of [Ti₄O(OEt)₁₂(PhenylPO₃)] ( 1 ) is the building block for two larger phosphonate‐substituted nanoclusters, [Ti₂₅O₂₆(OEt)₃₆(PhenylPO₃)₆] ( 2 ) and [Ti₂₆O₂₆(OEt)₃₉(PhenylPO₃)₆]Br ( 3 ). All compounds exhibit a not previously recognized triply bridging binding mode of the phosphonate anchor with short connecting Ti? O bonds, the average of which is 2.010(7) Å. Comparison with previously reported work suggests that the binding mode of the phosphonate anchor is strongly dependent on the structure of the underlying substrate.     

Implementation of chemometric techniques for evaluation of antioxidant properties of Camellia sinensis extracts

In this study, antioxidant properties of commercial green teas and dietary supplements containing Camellia sinensis extracts were evaluated. Extracts were examined using two antioxidant assays (DPPH^· radical method and ABTS^·+ cation radical method). A Folin-Ciocalteu assay was used to evaluate the total polyphenol content in the extracts. In order to compare and characterize the investigated Camellia sinensis extracts, chemometric techniques based on fingerprint chromatograms, antioxidant activity and total polyphenol content were applied. Application of chemometric methods allowed for reduction of multidimensionality of the data set and grouped the samples into differentiable clusters. The relationship between the antioxidant activity and total polyphenol content was also assessed. The results indicated that extracts with the higher polyphenolic content exhibited the stronger antiradical activity against both DPPH^· radicals and ABTS^·+ cation radicals. The multivariate calibration technique (such as a tree regression algorithm) can be a useful tool for rapid determining the antioxidant activity of a herbal product based on its fingerprint chromatogram      

Stress-Induced Domain Wall Motion in a Ferroelastic Mn3+ Spin Crossover Complex

Domain wall motion is detected for the first time during the transition to a ferroelastic and spin state ordered phase of a spin crossover complex. Single-crystal X-ray diffraction and resonant ultrasound spectroscopy (RUS) revealed two distinct symmetry-breaking phase transitions in the mononuclear Mn³⁺ compound [Mn(3,5-diBr-sal₂(323))]BPh₄, 1. The first at 250 K, involves the space group change Cc→Pc and is thermodynamically continuous, while the second, Pc→P1 at 85 K, is discontinuous and related to spin crossover and spin state ordering. Stress-induced domain wall mobility was interpreted on the basis of a steep increase in acoustic loss immediately below the the Pc-P1 transition     

From workplace air measurement results toward estimates of exposure? Development of a strategy to assess exposure to manufactured nano-objects

In the past few years, an increasing number of studies on workplace air measurements on manufactured nano-materials and -objects have been published. Most of the studies had a more explorative character, so a direct interpretation to workers” exposure for a given exposure situation, activity, or process is not a straight-forward process. In general, the studies use a quite similar package of devices for near real-time monitoring of particle number- and mass concentration in size ranges <100 nm up to 10 μm, and the collection of samples for off-line characterization of air samples. Various approaches for addressing background concentrations and its use to indicate the potential for exposure to nano-objects could be observed. Within the EU-sponsored NANOSH project, a harmonized approach for measurement strategy, data analysis and reporting was developed. In addition to time/activity–concentration profiles as reported by most studies, this approach enables a first step to estimate the potential for exposure to manufactured nano-objects, more quantitatively. The NANOSH data will be collated into a base, which may form the starting point for a harmonized database facilitating overall analysis in near future, to derive estimates for exposure for several exposure situations.     

Radon in well waters in the Kraków area

The method and the results of radon concentration measurements in water samples are presented. Since May 2000, measurements of radon concentration in well waters in the Kraków area have been carried out--both in urban wells (depth above 50 meters) and in other private wells (depth of several meters). The ionisation chamber AlphaGUARD PQ 2000PRO along with the additional special equipment AquaKIT were used for determination of radon concentration in water samples. A total of 45 wells were examined for radon concentration in water--19 urban wells, 21 private ones (from Nowa Huta, Ojcowska, Wola Justowska area--parts of Kraków) and 5 mineral water sources. Wola Justowska is a region where tectonics faults occur and radon can easily migrate from deep basement structure. All the obtained values of radon concentration are below 12 Bq/l. These preliminary results do not show a direct correlation between geological structure and radon concentration in water samples. However, further investigation is needed and is planned to be undertaken.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.