Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.     

Simultaneous determination of histamine and spermidine by second-derivative synchronous fluorescence spectrometry

The method is based on formation of the fluorescent condensation products with o-phthaldialdehyde; 0.5–2000 ng ml^?1 histamine and 3–700 ng ml^?1 spermidine can be quantified, with relative standard deviations of 2–3%. Histamine/spermidine ratios of 2.5:1–1:30 can be handled. A selectivity study is reported.     

Snapshots of dioxygen activation by copper: the structure of a 1:1 Cu/O(2) adduct and its use in syntheses of asymmetric Bis(mu-oxo) complexes

The X-ray structure of a 1:1 Cu/O(2) adduct revealed side-on (eta(2)) O(2) coordination. Density functional calculations corroborated the structure, indicated a significant contribution of a Cu(III)-(O(2)(2-)) resonance form, and provided insights into the key bonding interactions. Reaction of a 1:1 adduct supported by a slightly different beta-diketiminate ligand with Cu(I) reagents resulted in the formation of novel asymmetric bis(mu-oxo) complexes that were identified by EPR, UV-vis, and Raman spectroscopy, as well as by an X-ray structure in one instance.     

The glass-to-gel transition in solvent-swollen polystyrene networks

Glass transition temperatures have been determined for polystyrenes crosslinked with 1–10% divinylbenzene and swollen with toluene, chloroform, N,N-dimethylformamide, and tetrahydrofuran to as high as 0.7 weight fraction solvent. The T_g′s depend approximately on the weight fractions and the T_g′s of the components according to the empirical equation 1nT_g = m₁ 1nT_g1 + m₂ 1nT_g2 of Pochan. The T_g′s of the networks swollen with toluene also fit approximately a quasithermodynamic equation of Karasz based on the T_g′s and the ΔC_p′s at T_g of the components.     

A new approach to the synthesis of conjugated polymer-nanocrystal composites for heterojunction optoelectronics

We report a simple one pot process for the preparation of lead sulfide (PbS) nanocrystals in the conjugated polymer poly (2-methoxy-5-(2'ethyl-hexyloxy)-p-phenylene vinylene)(MEH-PPV), and we demonstrate electronic coupling between the two components.     

Fluorescence polarization assays in signal transduction discovery

Fluorescence polarization (FP) has become widely employed for high throughput screening used in pharmaceutical drug discovery. Assays of important signal transduction targets are now adapted to FP. In this review we examine assays for cyclic adenosine monophosphate, phosphodiesterases, and protein kinases and phosphatases using FP competitive immunoassays and a direct enzymatic method called IMAP.     

Spectrophotometric determination of tin(IV) by extraction of the ternary tin/iodide/5,7-dichloro-8-quinolinol complex

The characteristics of the ternary complexes formed by fluoride, bromide, iodide and thiocyanate with tin(IV) and 5,7-dichloro-8-quinolinol (HCQ) have been studied. A spectrophotometric method is proposed for the determination of tin(IV) (1–20 μg ml^?1), based on the extraction into chloroform of the tin/iodide/HCQ complex. Aluminium, bismuth and lead do not interfere, but antimony, copper, iron(III) and fluoride do. Copper and iron can be eliminated by preliminary extraction in the absence of iodide.     

Automatic flow procedure for the determination of ethanol in wine exploiting multicommutation and enzymatic reaction with detection by chemiluminescence

An automatic procedure for the determination of ethanol in wines using a flow system based on multicommutation and enzymatic reaction is described. Alcohol oxidase was immobilized on aminopropyl glass beads and packed in an acrylic column. The peroxide due to enzymatic reaction with ethanol reacted with luminol and generated the chemiluminescence radiation that was monitored by using a laboratory-made detector based on photodiodes. The system manifold comprised a set of 3-way solenoid valves controlled by a microcomputer furnished with electronic interfaces, which ran on software written in Quick BASIC 4.5 to provide facilities to perform on-line sample dilution, reagent addition, and data acquisition. After system parameters optimization, ethanol samples were processed without prior pretreatment. The following suitable features were achieved: linear response ranging from 2.5 to 25% (v/v) ethanol, relative standard deviation of 1.8% (n = 10), detection limit of 0.3% (v/v) ethanol, sampling rate of 23 determinations per hour, and low reagent consumption of 0.23 mg luminol and 7 mg hexacyanoferrate (III) per determination. When the results were compared with those obtained using the AOAC Official Method, no significant difference at the 90% confidence level was observed.     

Fe-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and Grignard reagents

A highly chemoselective iron-catalyzed three-component dicarbofunctionalization of unactivated olefins with alkyl halides (iodides and bromides) and sp²-hybridized Grignard reagents is reported. The reaction operates under fast turnover frequency and tolerates a diverse range of sp²-hybridized nucleophiles (electron-rich and electron-deficient (hetero)aryl and alkenyl Grignard reagents), alkyl halides (tertiary alkyl iodides/bromides and perfluorinated bromides), and unactivated olefins bearing diverse functional groups including tethered alkenes, ethers, protected alcohols, aldehydes, and amines to yield the desired 1,2-alkylarylated products with high regiocontrol. Further, we demonstrate that this protocol is amenable for the synthesis of new (hetero)carbocycles including tetrahydrofurans and pyrrolidines via a three-component radical cascade cyclization/arylation that forges three new C–C bonds.

A highly selective iron-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and sp²-hybridized Grignard reagents is reported.     

Structural characterization of cardiolipin by tandem quadrupole and multiple-stage quadrupole ion-trap mass spectrometry with electrospray ionization

We report negative-ion electrospray tandem mass spectrometric methods for structural characterization of cardiolipin (CL), a four-acyl-chain phospholipid containing two distinct phosphatidyl moieties, of which structural assignment of the fatty acid residues attached to the glycerol backbones performed by low-energy CAD tandem mass spectrometry has not been previously described. The low-energy MS2-spectra of the [M - H]- and [M - 2H]2- ions obtained with ion-trap or with tandem quadrupole instrument combined with ion-trap MS3-spectra or with source CAD product-ion spectra provide complete structural information for CL characterization. The MS2-spectra of the [M - H]- ions contain two sets of prominent fragment ions that comprise a phosphatidic acid, a dehydrated phosphatidylglycerol, and a (phosphatidic acid + 136) anion. The substantial differences in the abundances of the two distinct phosphatidic anions observed in the MS2-spectra of the [M -H]- ions lead to the assignment of the phosphatidyl moieties attached to the 1' or 3' position of central glycerol. Upon further collisional dissociation, the MS3-spectra of the phosphatidic anions provide information to identify the fatty acyl substituents and their position in the glycerol backbone. The MS2-spectra of the [M - 2H]2- ions obtained with TSQ or ITMS contain complementary information to confirm structural assignment. The applications of the above methods in the differentiation of cardiolipin isomers and in the identification of complex cardiolipin species consisting of multiple molecular structures are also demonstrated.