Efficiency and sustainability assessment for a group of farmers in the Brazilian Amazon

The aim of this paper is to use DEA models to evaluate sustainability in agriculture. Several variables are taken into account and the resulting efficiency is measured by comparison. The performance of family farms is analysed here (variables: farmed area, work force, and production). As agricultural sustainability depends on the maintenance of systems of production for long periods of time, the models were run for the years of 1986 and 2002. Tiered DEA models were used to group farmers in sustainability categories. Non-parametric regression models were used to identify the factors affecting the efficiency measurements. All the results indicate that the majority of the farmers increased their efficiency along the time. These improvements may support the existence of sustainability.     

Low-resolution 1H spin-spin relaxation of n-decane/water emulsions stabilized by beta-casein

A low-resolution ¹H NMR relaxometry study on the dynamics of an n-decane/water emulsion stabilized by β-casein is presented. Spin–spin (transverse) relaxation time constants (T₂) were used to assess relative mobilities of emulsion components, by a selective deuteration procedure. Data analysis allowed the emulsion investigated to be described by a heterogeneous collection of dynamically distinct populations. A major population of n-decane molecules presented an average mobility that very nearly approached that of pure solvent, which is compatible with its occurrence in the emulsion continuous microphase. β-Casein molecules displayed a prevalent population with significantly decreased mobility as compared to the free protein in solution, which is in accordance with the protein location at the oil/water interface. Also, a major H₂O population with significantly lower average T₂ as compared to the pure liquid was detected and has been assigned to interfacial water.     

In Situ Formation of a Uniform Distribution of Silver Nanoparticles in PVDF: Kinetics of Formation and Resulting Properties

Hybrid organic/silver nanoparticle thermoplastic films have been prepared using a single step process where the silver nanoparticles were formed during a cure cycle applied to the film. Figure 1 is a TEM demonstrating the ability of our technique to produce silver nanoparticles in the semi-crystalline polymer Poly(vinylidene fluoride) (PVDF). The current laboratory focus is on characterizing kinetics and particularly the diameter growth and inter-particle distance as a function of time and temperature using the techniques of small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Using the Beaucage model, the SAXS data demonstrates that the particle size reaches equilibrium after approximately 70 minutes of curing at 240 °C. This result is also observed in the XRD results where the half width of the diffraction peaks becomes smaller quickly during the initial hour. In a parallel experiment using DSC, the exothermic heat flow increases rapidly during the first hour but does not reach completion until almost 150 minutes.     

Morphology,mechanical, and water transport properties of melt blended EVOH/PVOH films

Herein, we report for the first time the successful preparation of ethylene–vinyl alcohol (EVOH)/poly(vinyl alcohol) (PVOH) blends by a melt blending process for PVOH volume content ranging from 0 to 30%. Thermal stability up to 270 °C was maintained for all blends. The blends morphology consisted in spherical low size PVOH domains homogeneously dispersed in the EVOH matrix with good interfacial properties. An increase of the mean size of the PVOH domains (from 0.3 to 1.2 μm) and of the size distribution was evidenced as the PVOH content increased. The contribution of each phase to the water sorption and diffusion was clearly demonstrated. The impact of water uptake was investigated on the chains mobility by using Gordon–Taylor law and on the mechanical properties of the blends with respect to the reference polymers. It was pointed out that the reinforcing effect of PVOH phase decreased as the water activity increased. However, a significant elongation at break was maintained, underlining the major role played by the EVOH continuous phase at high water activity. Finally, it was shown that adding PVOH to EVOH up to 15 vol % allowed strengthening the material at low water activity and keeping interesting elongation at break and barrier properties at high water activity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 838–850     

Water sorption and permeation in chitosan films: Relation between gas permeability and relative humidity

The water sorption of chitosan has been studied at 20 °C. Water transport is governed by a Fickian process for relative humidities lower than 0.4, and in that range of partial pressures, the diffusion coefficient is concentration‐dependent. At a higher activity, anomalous diffusion is observed. The sorption isotherm is well described by the Guggenheim‐Anderson‐de Boer (GAB) model, and the clustering phenomenon observed at high relative pressures can be studied with the parameters of this model. The water permeability coefficient greatly increases with the relative pressure, and the water plasticization effect leads to a loss of the gas barrier properties under wet conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3114–3127, 2001     

Biodegradation of polyurethanes and nanocomposites to non-cytotoxic degradation products

Polyurethanes with controllable biodegradable properties have been considered for biomedical applications. However, the potential toxicity of their biodegraded by-products is still a concern. In this study, biodegradable polyurethanes based on poly(?-caprolactone) (PCL) and/or poly(ethylene glycol) as soft segments and biodegradable polyurethanes containing montmorillonite nanoparticles were synthesized and were subjected to in vitro biodegradation for 4 months. The post-degraded polyurethanes and nanocomposites were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and small angle X-ray scattering (SAXS). The toxicity of the biodegradation by-products was evaluated by measuring their effect on the viability of retinal cells. FTIR results indicated that hard segments of the biomaterials were preserved during biodegradation, and suggested that the ester bonds of the PCL incorporated into the soft segments were hydrolytic broken. XRD data indicated also that the soft segments crystallized as a result of the hydrolysis of PCL ester bonds and re-organization of the amorphous phase during annealing at 37 °C. As the biodegradation of the biomaterials induced the formation of soft segment lamella crystals, a complex nanostructure was formed, resulting in the enhancement of the small angle X-ray scattering. The by-products were non-cytotoxic to the retinal cells. These results suggest that the hydrolytic unstable polyurethanes and nanocomposites can be possible candidates for ophthalmological applications.     

Two-dimensional coordination polymer matrix for solid-phase extraction of pesticide residues from plant Cordia salicifolia

The 2D coordination polymer (_∞[Gd(DPA)(HDPA)]) was tested for extraction of acephate, chlorpropham, pirimicarb, bifenthrin, tetradifon, and phosalone from the medicinal plant Cordia salicifolia, whose extracts are commercialized in Brazil as diuretic, appetite suppressant, and weight loss products, using GC/MS, SIM. Considering that there are no Brazilian regulations concerning maximum permissible pesticide residue concentrations in medicinal herbs, recovery experiments were carried out (seven replicates), at two arbitrary fortification levels (0.5 and 1.0 mg/kg), resulting in recoveries in range of 20 to 107.7% and SDRSDs were between 5.6 and 29.1% for _∞[Gd(DPA)(HDPA)] sorbent. Detection and quantification limits for herb ranged from 0.10 to 0.15 mg/kg and from 0.15 to 0.25 mg/kg, respectively, for the different pesticides studied. The developed method is linear over the range assayed, 0.5–10.0 μg/mL, with correlation coefficients ranging from 0.9975 to 0.9986 for all pesticides. Comparison between _∞[Gd(DPA)(HDPA)] sorbent and conventional sorbent (neutral alumina) showed similar performance of _∞[Gd(DPA)(HDPA)] polymeric sorbent for three (bifenthrin, tetradifon, and phosalone) out of six pesticides tested.     

EPR and DFT studies of the one-electron reduction product of phospholium cations

Cyclic voltammetry and EPR spectroscopy show that cationic phospholium groups are good electron acceptors whose reduction leads to a neutral radical where the unpaired electron is mainly delocalized on the carbon atoms of the five-membered ring. DFT calculations together with the crystal structure of phospholiums indicate that the electron addition causes a drastic diminution of the exocyclic CPC angle. The SOMO of reduced phospholium is compared to the SOMO of the phosphole radical anion.     

E´tude the´orique de la conformation de la 1,1-dime´thylhydrazine et du complexe (CH3)2N-NH2 · BF3

CNDO/2 calculations are performed in order to determine the preferred conformations of 1,1-dimethylhydrazine and 1,1-dimethylhydrazine-boron trifluoride complex. In each case, the calculations reveal the existence of an equilibrium between gauche and trans forms (25 % of trans form in the free molecule, 65 % in the complex). In agreement with experiment, the results confirm that BF₃ is attached to the nitrogen atom bearing the methyl groups.