Smart modification of inorganic fibers and flammability mechanical and radiation shielding properties of their rubber composites

Facile and smart method for the modification of inorganic fibers has been developed. The polyaniline was synthesized on basalt fiber surface presenting an organic polymer shell to the inorganic fibers. The modified basalt fibers were dispersed in rubber-producing well-dispersed rubber composites. Various mass loadings of modified basalt fibers were dispersed and optimized. The effect of radiation on the properties of developed rubber composites was investigated by exposure to different gamma radiation doses. The flammability, thermal and mechanical properties were studied. The flammability of developed composites was improved achieving 62 and 16% reduction in the peak heat release rate compared to blank rubber and unmodified basalt fiber-based rubber composite, respectively. This is in addition to significant reduction in emission of CO and CO₂ gases by 65 and 58%, respectively. Also, the tensile strength property was enhanced by 38 and 53% compared to blank and unmodified basalt composite, respectively. The role of polyaniline layer on inorganic fiber surface and their effect on the properties of the produced composites was studied. The organic polymer shell achieved good compatibility and interfacial adhesion of basalt fibers with rubber matrix and radiation protection effect for the developed composites.     

Dispelling myths on superposition attacks: formal security model and attack analyses

Designs, Codes and Cryptography - With the emergence of quantum communication, it is of folkloric belief that the security of classical cryptographic protocols is automatically broken if the...     

Comparison of GC and HPLC Methods for Quantitative Analysis of Tinuvin 622 After Saponification in Polyethylene

This study describes the sample preparation and two chromatographic techniques for determination of Tinuvin 622 in polyethylene. The first part of the two methods consisting of dissolving the polyethylene in boiling xylene is followed by addition of a methanolic solution of potassium hydroxide. The polymeric light stabilizer, Tinuvin 622, is thereby saponified to 4-hydroxy-2,2,6,6-tetramethyl-1-piperidineethanol (diol). Addition of the methanolic solution of the saponification reagent simultaneously precipitates the polyethylene matrix. Then the diol is quantified using either gas chromatography (GC) or high performance liquid chromatography (HPLC). For GC, a Macherey Nagel Optima-17 capillary column (30m×0.25mm ID, film thickness 0.25µm) is used. Nitrogen is used as carrier gas and make-up gas. The detection system is a flame ionization detector. For HPLC, an octadecyl silane (ODS) column (30cm×4mm, particle size 5µm) and a mobile phase methanol: water mixture (3:97, v/v) are used. Detection of analyte is carried out at 215nm. Both methods can be used to determine Tinuvin 622 in polyethylene in the concentration range of 0.02–1%, which represents the usual application concentration.     

The estimation of the hydrophobic and electrostatic contributions to the free energy change upon cationic surfactants binding to Jack bean urease

The binding of a homologous series of n-alkyltrimethyl ammonium bromides with Jack bean urease (JBU) have been studied previously. It has been suggested that both electrostatic and hydrophobic interactions are involved in the formation of surfactant-protein complexes, but there is not any quantities analyzing method for resolution of their contributions in the process. In the present study, at first, the intrinsic Gibbs free energy of binding, ΔG_b,ν, has been calculated for these systems and the trend of variation for both binding sets have been interpreted on basis of cooperativity and hydrophobicity of surfactants. Subsequently, a novel approach has been introduced for estimation of electrostatic and hydrophobic interactions in ΔG_b,ν, by considering of this fact that ΔG_b,ν is the summation of electrostatic, ΔG_b,ν(ele), and hydrophobic, ΔG_b,ν(hyd), parts and considering this fact that just ΔG_b,ν(hyd) is a function of hydrocarbon tail length of surfactant (C_n). The results represents the higher positive rule of electrostatic interactions in binding affinity of first set and inhibiting rule of this interaction in the second binding set. The predominate driving force in the second binding set is entropy statistical effect, which arises from numerous number of binding sites in this set. A binding mechanism on basis of structural changes in JBU due to its interaction with cationic surfactants has also been proposed.     

Water promoted one-pot synthesis of 2′-aminobenzothiazolomethyl naphthols and 5-(2′-aminobenzothiazolomethyl)-6-hydroxyquinolines

A novel one-pot, three-component condensation reaction of an aldehyde, 2-aminobenzothiazole and 2-naphthol or 6-hydroxyquinoline in water to give 2′-aminobenzothiazolomethyl naphthols or 5-(2′-aminobenzothiazolomethyl)-6-hydroxyquinolines in high yields at 90 °C without using any catalyst, is described.     

Green Oxidations. Manganese(II) Sulfate Aided Oxidations of Organic Compounds by Potassium Permanganate

Summary. The oxidation of arenes and sulfides by potassium permanganate was accomplished in good yields under solvent free and heterogeneous conditions when manganese(II) sulfate is used as a solid support. After extraction of the organic products, the inorganic products can be reoxidized to permanganate. This result is important because it provides an approach to oxidation reactions that is, in theory, infinitely sustainable.     

One‐pot synthesis of highly functionalized benzo [1,3] thiazine from isocyanides,aniline, and heterocumulene via Cu‐catalyzed intramolecular C‐H activation reactions

A one‐pot synthesis of functionalized benzo thiazine derivatives via a Cu‐catalyzed, multicomponent reaction of isocyanides, aniline, and heterocumulenes in acetonitrile at room temperature was developed. Transition metal‐catalyzed activation of C‐H bonds under mild copper‐catalytic reaction conditions, using simple and available starting materials, also obtaining a pure product with high yield without applying column chromatography are the major advantages of the applied method among the other ones used for this purpose. The structures are confirmed spectroscopically (¹H‐ and ¹³C‐NMR, IR, and EI‐MS) and through elemental analyses.     

Heck and oxidative boron Heck reactions employing Pd(II) supported amphiphilized polyethyleneimine‐functionalized MCM‐41 (MCM‐41@aPEI‐Pd) as an efficient and recyclable nanocatalyst

A novel nanocatalyst was developed based on covalent surface functionalization of MCM‐41 with polyethyleneimine (PEI) using [3‐(2,3‐Epoxypropoxy)propyl] trimethoxysilane (EPO) as a cross‐linker. Amine functional groups on the surface of MCM‐41 were then conjugated with iodododecane to render an amphiphilic property to the catalyst. Palladium (II) was finally immobilized onto the MCM‐41@PEI‐dodecane and the resulted MCM‐41@aPEI‐Pd nanocatalyst was characterized by FT‐IR, TEM, ICP‐AES and XPS. Our designed nanocatalyst with a distinguished core‐shell structure and Pd²⁺ ions as catalytic centers was explored as an efficient and recyclable catalyst for Heck and oxidative boron Heck coupling reactions. In Heck coupling reaction, the catalytic activity of MCM‐41@aPEI‐Pd in the presence of triethylamine as base led to very high yields and selectivity. Meanwhile, the MCM‐41@aPEI‐Pd as the first semi‐heterogeneous palladium catalyst was examined in the C‐4 regioselective arylation of coumarin via the direct C‐H activation and the moderate to excellent yields were obtained toward different functional groups. Leaching test indicated the high stability of palladium on the surface of MCM‐41@aPEI‐Pd as it could be recycled for several runs without significant loss of its catalytic activity.