Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.     

13-Hydroxyacenaphato[1,2-b]quinolizinium bromide as a new flouorescence indicator

13-Hydroxyacenaphtho[1,2-b]quinolizinium bromide (13-HQBr)was selected as a fluorescence indicator to determine basic compounds in non-aqueous media. This compound possesses an acidic phenolic hydroxyl group. It presents varying absorption (ROH, 408, 430 nm; RO(-) 456, 478 nm) and excitation spectra (ROH, 425 nm; RO, 471 nm) depending on the pH of the media, but the same emission fluorescence spectrum (ROH = RO(-), 526 nm) at different pH in buffered aqueous solutions. However, in acidic non-aqueous media (acetic, formic and trifluoroacetic acids), it can be observed that the fluorescence emission spectra differ for the ionized (lambda(em) = 530 nm) and non-ionized (lambda(em) = 440, 470 nm) forms. The fluorescence intensity at the characteristic peaks depends on the acid-base equilibria in the ground and excited states. Therefore, this property could be used to evaluate the concentration of basic compounds, showing a good linearity range between fluorescence intensity and basic sample concentration.     

Quantification of free and total salicylic acid in plants by solid-phase extraction and isocratic high-performance anion-exchange chromatography

Salicylic acid (SA) is an important signaling compound in plants and is involved in various defense responses. Here we report a new method for quantification of free and total soluble SA in Arabidopsis thaliana with 5-fluorosalicylic acid (5-FSA) as internal standard. The SA was isolated from leaf extracts by solid-phase extraction with phenyl-phase cartridges and selectively eluted as the cationic iron(III)-complex. Recoveries of SA and 5-FSA were equal and exceeded 90%. Free SA was subsequently released from the iron(III)-complex by addition of 2,2-bipyridyl and high-performance anion-exchange chromatography was performed on an NH₂ column. The SA appeared as last peak with a retention time of 15 min, baseline-separated from other substances. On-line detection was performed fluorimetrically for both SA and 5-FSA at an excitation wavelength of 300 nm and an emission wavelength of 410 nm, because both substances give similar fluorescence spectra. The detection limit for SA was 5 ng g^–1 FW for a sample size of 100 mg. Thus the main advantages of the method are highly selective sample preparation, increased sensitivity, reduced analysis time compared with reversed-phase HPLC, and use of a novel internal standard detectable under the same conditions as SA. The techniques described are applicable to other plant materials.     

Synthesis and pharmacological evaluation of new 16-methyl pregnane derivatives

The pharmacological activity of several new pregnane derivatives 15-19 were determined on gonadectomized male hamster flank organs, seminal vesicles and in vitro conversion of testosterone (T) to dihydrotestosterone (DHT) as 5alpha-reductase inhibitors. Steroids 15-19 decreased the diameter of the pigmented spot in the flank organs as compared to the T treated animals; in this model, steroids 16 and 19 showed a higher activity than the commercially available finasteride 3. Injection of T increased the weight of the seminal vesicles. Compounds 15-19 when injected together with T decreased the weight of the seminal vesicles thus showing an antiandrogenic effect. The trienone 19 exhibited a considerably higher activity than finasteride. Steroids 15-19 inhibited the in vitro metabolism of [3H]T to [3H]DHT in seminal vesicles homogenates of gonadectomized male hamsters. Compounds 18 and 19 showed a much higher antiandrogenic effect than finasteride. This enhancement of the biological activity could probably be attributed to the coplanarity of the steroidal skeleton as previously observed by our group. The high antiandrogenic activity of the epoxy compound 16 is probably the result of the ring opening of the oxiran ring with the nucleophilic part of the enzyme 5alpha-reductase thus leading to a stable adduct with concomitant deactivation of this enzyme.     

EPR study of ceria–silica and ceria–alumina catalysts: Localization of superoxide radical anions

Oxygen adsorption experiments were performed on evacuated and prereduced CeO₂/SiO₂ and CeO₂/Al₂O₃ catalysts with and without platinum. Considerable amounts of the superoxide radical ions were stabilized on all the samples. Signal parameters suggest Ce⁴⁺–O₂⁻ positioning for all detectable superoxide species. Physisorbed oxygen broadens O₂⁻ signal beyond detection for all the alumina-based samples, while the same procedure for all the silica-based samples did not change signal shape of O₂⁻ species. Detectable O₂⁻ species are localized in the bulk of ceria and the nature of support (silica or alumina) determines the number of oxygen vacancies and the rate of electron transfer. XRD data suggest that for alumina-based samples small and/or thin islands of ceria dominate, while comparatively large ceria particles are stabilized on the surface of silica-based samples with the same ceria content. Average size of ceria crystallites is still not determining factor and cannot account for the observed differences. Higher concentrations of paramagnetic species may be stabilized on alumina-based samples and thus, sensor-like behavior towards gaseous oxygen at room temperature was detected for them—oxygen admission reversibly changes superoxide lineshape. For silica samples, only minor changes of O₂⁻ lineshapes were typical upon the change of the partial pressure of oxygen at ambient and low temperatures. Addition of platinum has little effect on parameters of the O₂⁻ signal, except an enhancement of the superoxide decay in the reducing media. Possible site for O₂⁻ stabilization inside the lattice of CeO₂ was proposed and relevance of the observed effects to the redox catalysis discussed.     

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

Towards the development of multisensor for drugs of abuse based on molecular imprinted polymers

The synthetic receptors for cocaine, deoxyephedrine, methadone and morphine were computationally designed and produced using molecular imprinting. The structure and energy of the molecular complexes were analysed by computational techniques. The possible structures of the binding sites in the synthetic receptors have been compared with those of corresponding natural receptors. The composition of imprinted polymers was optimised to allow adequate performance under the same experimental conditions. All selected molecular imprinting polymers (MIPs) demonstrated stronger affinity in comparison with corresponding blank polymers resulting in imprinted factors (I) equal to 1.2 (cocaine), 2.5 (deoxyephedrine), 3.5 (methadone) and 3 (morphine) which suggested that the specific binding site for each molecule was successfully created. The polymers studied possessed good selectivity and affinity towards their templates and could be recommended for the integration with sensor devices. From a practical point of view, especially for multisensor requirements, the synthetic receptors based on imprinted polymers could be superior to natural receptors due to their stability, robustness and compatibility with automation processes required for sensor fabrication.     

Quantitative analysis of caffeic acid phenethyl ester in crude propolis by liquid chromatography-electrospray ionization mass spectrometry

Caffeic acid phenethyl ester (CAPE), an active component of propolis from honeybee hives, is known to have antimitogenic, anticarcinogenic, antinflammatory, and immunomodulatory properties. The paper describes a rapid and simple liquid chromatography-electrospray ionisation mass spectrometry method for qualitative and quantitative determination of CAPE. The chromatographic separation was performed with a Luna RP-C18 column using a water-acetonitrile linear gradient. The method was linear over a 0.125-80 ng/mL range (LOD = 62.5 pg/mL). The method was applied for the quantitation of caffeic acid phenethyl ester in crude propolis samples, which were analysed directly after extraction with ethyl acetate solution.